A steady-state approach for evaluating the impact of solute transport through composite liners on groundwater quality

New adaptations of analytical equations for predicting the impact of solute transport through composite landfill liners on groundwater quality for steady-state conditions are presented. Analytical equations are developed for evaluating average concentration and mass flow rate in an underlying aquifer resulting from diffusion of volatile organic compounds (VOCs) through intact composite liners and transport of inorganic constituents through defects in composite liners. The equations are applied to evaluate the effectiveness and equivalency of composite liners having either a 0.6 m-thick compacted soil liner or a 6.5 mm-thick geosynthetic clay liner (GCL) overlying an intermediate attenuation layer and an aquifer having horizontal flow. Example analyses for designing composite liners meeting particular performance criteria are also provided. The analytical equations are relatively simple to apply and can be used for preliminary design and analysis, to evaluate experimental results, and to possibly verify more complex numerical models for evaluating the impact of landfills on groundwater quality if consistency of the assumptions of the analytical equations and the more complex numerical models can be specified.     

Windsor, Ontario exposure assessment study: design and methods validation of personal, indoor, and outdoor air pollution monitoring

The Windsor, Ontario Exposure Assessment Study evaluated the contribution of ambient air pollutants to personal and indoor exposures of adults and asthmatic children living in Windsor, Ontario, Canada. In addition, the role of personal, indoor, and outdoor air pollution exposures upon asthmatic children's respiratory health was assessed. Several active and passive sampling methods were applied, or adapted, for personal, indoor, and outdoor residential monitoring of nitrogen dioxide, volatile organic compounds, particulate matter (PM; PM-2.5 pm [PM2.5] and < or =10 microm [PM10] in aerodynamic diameter), elemental carbon, ultrafine particles, ozone, air exchange rates, allergens in settled dust, and particulate-associated metals. Participants completed five consecutive days of monitoring during the winter and summer of 2005 and 2006. During 2006, in addition to undertaking the air pollution measurements, asthmatic children completed respiratory health measurements (including peak flow meter tests and exhaled breath condensate) and tracked respiratory symptoms in a diary. Extensive quality assurance and quality control steps were implemented, including the collocation of instruments at the National Air Pollution Surveillance site operated by Environment Canada and at the Michigan Department of Environmental Quality site in Allen Park, Detroit, MI. During field sampling, duplicate and blank samples were also completed and these data are reported. In total, 50 adults and 51 asthmatic children were recruited to participate, resulting in 922 participant days of data. When comparing the methods used in the study with standard reference methods, field blanks were low and bias was acceptable, with most methods being within 20% of reference methods. Duplicates were typically within less than 10% of each other, indicating that study results can be used with confidence. This paper covers study design, recruitment, methodology, time activity diary, surveys, and quality assurance and control results for the different methods used.     

Value in sustainability: the process industry perspective

The most important driver for management is successful business that increases its value to shareholders. The adoption of environmentally responsible business practices can open up an additional range of opportunities for companies, for example by improving material efficiency. The choice to improve environmental performance of a company tends to also improve its financial performance. In this paper, our aim is to study the value of sustainability in process and mining industry from the perspective of interest groups such as investors, customers and the public, by using case examples. Interviews and workshops were employed to investigate whether or not investors and customers are interested in sustainability in the process and mining industries. We also illustrate how easy it can be to jeopardize corporate reputation through. The present situation and challenges faced in bringing sustainability into everyday business practices are summarized and proposals made concerning ways to achieve increased sustainability.     

Enhancement of nitrogen and phosphorus removal from eutrophic water by economic plant annual ryegrass (Lolium multiflorum) with ion implantation

Severe eutrophication of surface water has been a major problem of increasing environmental concern worldwide. In the present study, economic plant annual ryegrass (Lolium multiflorum) was grown in floating mats as an economic plant-based treatment system to evaluate its potential after ion implantation for removing nutrients in simulated eutrophic water. The specific weight growth rate of L. multiflorum with ion implantation was significantly greater than that of the control, and the peroxidase, nitrate reductase, and acid phosphatase activities of the irradiated L. multiflorum were found to be greater than those plants without ion implantation. Higher total nitrogen (TN) and total phosphorus (TP) removal efficiencies were obtained for the L. multiflorum irradiated with 25 keV 5.2?×?10¹⁶ N⁺ ions/cm² and 30 keV 4.16?×?10¹⁶ N⁺ ions/cm², respectively (p?L. multiflorum itself was directly responsible for 39–49 and 47–58 % of the overall N and P removal in the experiment, respectively. The research results suggested that ion implantation could become a promising approach for increasing phytoremediation efficiency of nutrients from eutrophic water by L. multiflorum.     

Knowledge transfer initiative between molecular biologists and environmental researchers and regulators

A Natural Environment Research Council (NERC) funded Knowledge Transfer (KT) workshop was held in the United Kingdom (UK) to identify the needs and opportunities in the application of molecular biology and ‘omics’ techniques to environmental monitoring and risk assessment. Attendees highlighted a lack of effective communication between end-users and researchers as well as difficulties with data interpretation as reasons behind the slow uptake of molecular biology and omics techniques. A number of promising areas in which new techniques could be implemented at a practical level in the very near future were identified, thereby raising the profile of these recent technologies and providing vital proof of concept work. Molecular taxonomy, bacterial source tracking and pre-screening of chemicals for potential toxicities were all viewed as areas in which omics and molecular techniques could have immediate value, with the aim of reducing cost, increasing efficiency and providing more comprehensive data of improved quality.     

The ozone formation potential of 1-bromo-propane

1-Bromo-propane (1-BP) is a replacement for high-end chlorofluorocarbon (HCFC) solvents. Its reaction rate constant with the OH radical is, on a weight basis, significantly less than that of ethane. However, the overall smog formation chemistry of 1-BP appears to be very unusual compared with typical volatile organic compounds (VOCs) and relatively complex because of the presence of bromine. In smog chamber experiments, 1-BP initially shows a faster ozone build-up than what would be expected from ethane, but the secondary products containing bromine tend to destroy ozone such that 1-BP can have a net overall negative reactivity. Alternative sets of reactions are offered to explain this unusual behavior. Follow-up studies are suggested to resolve the chemistry. Using one set of bromine-related reactions in a photochemical grid model shows that 1-BP would be less reactive toward peak ozone formation than ethane with a trend toward even lower ozone impacts in the future.     

Removal of SO2 and NOX from Stack Gas by Reaction with Calcium Hydroxide Solids

Previous workers have shown that simultaneous SO₂/NO_X removal can be obtained in a dry scrubbing system with Ca(OH)₂ promoted by an additive such as NaOH, and that fly ash and product recycle improve the reactivity of the solids toward SO₂. To test SO₂/NO_X removal with fly ash and product recycle, bench-scale experiments with a packed bed reactor were performed at bag filter conditions. The most reactive solid for NO_X removal was prepared by slurrying Ca(OH)₂ with fly ash, CaSO₃, and NaOH. The best conditions for NO_X removal were the greatest temperature (125°C) and greatest concentrations of SO₂ (1500 ppm) and O₂ (20 percent). At the best conditions, NO_X removed in 1 hour was 3-4 moles per 100 moles Ca(OH)₂, compared to 5-10 moles SO₂ removed per 100 moles Ca(OH)₂. The best SO₂ removal was obtained at the highest relative humidities/lowest temperatures (55% RH/ 65°C) with solids prepared by slurrying Ca(OH)₂ with fly ash and NaOH. At these conditions, SO₂ removed In 1 hour was 60-80 moles per 100 moles Ca(OH)₂, compared to 0.5 to 1 moles NO_X removed per 100 moles Ca(OH)₂.     

Fate of bulk and trace organics during a simulated aquifer recharge and recovery (ARR)-ozone hybrid process

The attenuation of bulk organic matter and trace organic contaminants (TOrCs) was evaluated for various aquifer recharge and recovery (ARR)-ozone (O₃) hybrid treatment process combinations using soil-batch reactor and bench-scale ozonation experiments as a proof of concept prior to pilot and/or field studies. In water reclamation and especially potable reuse, refractory bulk organic matter and TOrCs are of potential health concern in recycled waters. In this study, the role of biotransformation of bulk organic matter and TOrCs was investigated considering different simulated treatment combinations, including soil passage (ARR) alone, ARR after ozonation (O₃-ARR), and ARR prior to ozonation (ARR-O₃). During oxic (aerobic) ARR simulations, soluble microbial-like substances (e.g., higher molecular weight polysaccharides and proteins) were easily removed while (lower molecular weight) humic substances and aromatic organic matter were not efficiently removed. During ARR-ozone treatment simulations, removals of bulk organic matter and TOrCs were rapid and effective compared to ARR alone. A higher reduction of effluent-derived organic matter, including aromatic organic matter and humic substances, was observed in the ARR-O₃ hybrid followed by the O₃-ARR hybrid. An enhanced attenuation of recalcitrant TOrCs was observed while increasing the ozone dose slightly (O₃: DOC = 1). TOrC removal efficiency also increased during the post-ozone treatment combination (i.e., ARR-O₃). In addition, the carcinogenic wastewater disinfection byproduct N-nitrosodimethylamine (NDMA) was eliminated below the method reporting limit (<5 ng L⁻¹) both during ARR treatment alone and the ARR-ozone hybrid.     

An evaluation of the applicability of microarrays for monitoring toxic algae in Irish coastal waters

The applicability of microarrays to monitor harmful algae across a broad range of ecological niches and toxic species responsible for harmful algal events has been one of the key tasks in the EU Seventh Framework Programme (FP7)-funded Microarrays for the Detection of Toxic Algae project. The technique has a strong potential for improving speed and accuracy of the identification of harmful algae and their toxins to assist monitoring programmes. Water samples were collected from a number of coastal sites around Ireland, including several that are used in the Irish National Phytoplankton and Biotoxin Monitoring Programme. Ribosomal RNA was extracted from filtered field samples, labelled with a fluorescent dye, and hybridised to probes spotted in a microarray format on a glass slide. The fluorescent signal intensity of the hybridisation to >120 probes on the chip was analysed and compared with actual field counts. There was a general agreement between cell counts and microarray signal. Results are presented for field samples taken from a range of stations along the Irish coastline known for harmful algal events during the first field trial (July 2009–April 2010).     

Wind Characteristics of Mesquite Streets in the Northern Chihuahuan Desert, New Mexico, USA

Past research has shown that the most important areas for active sand movement in the northern part of the Chihuahuan Desert are mesquite-dominated desert ecosystems possessing sandy soil texture. The most active sand movement in the mesquite-dominated ecosystems has been shown to take place on elongated bare soil patches referred to as “streets”. Aerodynamic properties of mesquite streets eroded by wind should be included in explaining how mesquite streets are more emissive sand sources than surrounding desert land. To understand the effects of wind properties, we measured them at two flat mesquite sites having highly similar soil textures but very different configurations of mesquite. The differences in wind properties at the two sites were caused by differences of size, orientation, and porosity of the mesquite, along with the presence of mesquite coppice dunes (sand dunes stabilized by mesquites growing in the dune and on its surface) found only at one of the two sites. Wind direction, u_* (friction velocity), z₀ (aerodynamic roughness height) and D (zero plane displacement height) were estimated for 15-m tower and 3-m mast data. These aerodynamic data allowed us to distinguish five categories with differing potentials for sediment transport. Sediment transport for the five categories varied from unrestricted, free transport to virtually no transport caused by vegetation protection from wind forces. In addition, “steering” of winds below the level of the tops of mesquite bushes and coppice dunes allowed longer parallel wind durations and increased wind erosion for streets that aligned roughly SW–NE. U.S. Government right to retain a non-exclusive royalty-free licence in and to any copyright is acknowledged.