PAC-chitosan复合絮凝剂中铝形态

以不同碱化度(B)的聚合氯化铝(PAC)和不同粘度的壳聚糖为原料制备出一系列PAC-chitosan复合絮凝剂。采用Al-Ferron逐时络合比色法研究了PAC-chitosan复合絮凝剂中铝的形态分布,探讨了PAC的B值、壳聚糖的含量（C）和粘度（η）对复合絮凝剂中铝的形态分布的影响。结果表明：壳聚糖与PAC之间发生了一定的相互作用,通过试验结果推断出当B=1.5,壳聚糖粘度η=800 Pa·s,C=0.6 mg/mL絮凝效果最佳。并用某造纸废水进行了烧杯絮凝试验。絮凝试验结果与推断结果相一致。     

一体化臭氧-曝气生物滤池处理酸性玫瑰红印染模拟废水

针对含酸性玫瑰红印染废水高色度、难生物降解的特点,分别采用了一体化和分离式臭氧-曝气生物滤池(O3-BAF)工艺处理。与分离式工艺相比,一体化工艺的特点是在一个反应器内部同时实现臭氧氧化和生化的协同作用,降低了处理设施的基建和运行费用。实验结果表明,一体化工艺处理效果明显优于分离式工艺,脱色率达92%,COD去除率达60%,处理效果良好。     

旋转填料床/柠檬酸盐法吸收-解吸SO2

提出采用旋转填料床结合柠檬酸盐法脱除烟气中SO2的方法,考察了旋转填料床转子转速、液气比、初始柠檬酸根浓度和初始pH值等因素对脱硫效率的影响。结果表明,采用超重力法超重机转子转速为1 000 r/min、液气比为7L/m3、初始柠檬酸根浓度为1.5 mol/L、吸收液的初始pH值为5.0,脱硫效率稳定在99%左右。研究了水蒸气汽提法解吸SO2时初始柠檬酸根浓度、初始pH值、SO2浓度、富液流量和水蒸气流量对解吸效率的影响,得出了影响SO2解吸率的基本规律,并进行了分析。通过实验证明该方法在技术上是可行的,具有良好的应用前景。     

Assessing and forecasting the impacts of global change on Mediterranean rivers. The SCARCE Consolider project on Iberian basins

Introduction

The Consolider-Ingenio 2010 project SCARCE, with the full title ??Assessing and predicting effects on water quantity and quality in Iberian Rivers caused by global change?? aims to examine and predict the relevance of global change on water availability, water quality, and ecosystem services in Mediterranean river basins of the Iberian Peninsula, as well as their socio-economic impacts. Starting in December 2009, it brought together a multidisciplinary team of 11 partner Spanish institutions, as well as the active involvement of water authorities, river basin managers, and other relevant agents as stakeholders.

Methods

The study areas are the Llobregat, Ebro, Jucar, and Guadalquivir river basins. These basins have been included in previous studies and projects, the majority of whom considered some of the aspects included in SCARCE but individually. Historical data will be used as a starting point of the project but also to obtain longer time series. The main added value of SCARCE project is the inclusion of scientific disciplines ranging from hydrology, geomorphology, ecology, chemistry, and ecotoxicology, to engineering, modeling, and economy, in an unprecedented effort in the Mediterranean area. The project performs data mining, field, and lab research as well as modeling and upscaling of the findings to apply them to the entire river basin.

Results

Scales ranging from the laboratory to river basins are addressed with the potential to help improve river basin management. The project emphasizes, thus, linking basic research and management practices in a single framework. In fact, one of the main objectives of SCARCE is to act as a bridge between the scientific and the management and to transform research results on management keys and tools for improving the River Basin Management Plans. Here, we outline the general structure of the project and the activities conducted within the ten Work Packages of SCARCE.     

温度对合成钛酸盐纳米材料的影响及其对水中Cd (Ⅱ)的去除效果

为有效去除水中Cd（Ⅱ）,以TiO₂纳米粉和NaOH为原料,调节水热反应温度分别为100、120、150和190℃,制备出了不同形貌的TNs（钛酸盐纳米材料）,分别记为TNs-100、TNs-120、TNs-150和TNs-190,并对其形貌、结构、比表面积、化学组成等物理化学性能进行了表征;通过对水中Cd（Ⅱ）的静态吸附试验,考察了TNs对Cd（Ⅱ）的吸附性能.结果表明:随着合成温度的升高,TNs的形貌逐渐从纳米片演变成纳米管,管长逐渐变长,最后变成纳米棒.TNs-100的晶型结构主要是锐钛矿型;随着温度升高,结晶度逐渐增强;TNs-190出现了部分金红石相.TNs-150对Cd（Ⅱ）的吸附能力最强,最大平衡吸附量为254.66 mg/g,最佳吸附pH为5.0.再生的TNs-150对Cd（Ⅱ）循环吸附6次的去除率和解吸率均可达93%以上.TNs-150对Cd（Ⅱ）的吸附过程符合准二阶动力学方程和Langmuir吸附等温模型,吸附机制主要是TNs层间Na+和H+与溶液中Cd（Ⅱ）的离子交换.研究显示,TNs的饱和吸附量均高于同类吸附剂,能有效去除水中Cd（Ⅱ）.      

新乡市镉污染土壤细菌群落组成及其对镉固定效果

重金属污染土壤中具有丰富的微生物群落组成,为生物修复提供了微生物资源.本研究以新乡市某电池厂周边Cd污染土壤为研究对象,采用高通量测序和平板分离方法分析其细菌群落组成.传统培养方法表明新乡市重金属污染土壤细菌由厚壁菌门、放线菌门、变形菌门和拟杆菌门这4个门,芽孢杆菌属、节杆菌属和根瘤菌属等30个属组成;高通量测序表明,其由变形菌门、放线菌门和酸杆菌门等25门及400属组成.相较于培养方法,高通量测序群落组成更为丰富.基于高通量测序的分子生态网路分析表明其关键细菌分别为Arthrobacter、Marmoricola、Nocardioides、Ferruginibacter、Flavitalea、Nitrospira和Lysobacter等组成.对分离的159株可培养菌株进行Cd摇瓶吸附实验,结果表明Aneurinibacillus、Arthrobacter和Bacillus等11个属的30株菌具有较好地固定效果.效果验证实验表明,Ochrobactrum sp. 1-6、Bacillus sp.2-11和Pseudomonas sp.1-9等6株高效菌株能提高青菜(鸡毛菜)生物量、降低...     

Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

一株高效嗜碱反硝化菌的分离鉴定及其脱氮特性研究

为了应对日趋严苛的废水TN排放标准要求,试验采用溴百里酚蓝(BTB)培养基,从某煤化工废水处理厂反硝化缺氧池活性污泥中,经多次分离、纯化获得了一株高效兼性厌氧反硝化菌株HK13.通过形态观察及16S rRNA基因序列分析,菌株HK13被鉴定为施氏假单胞菌属(Pseudomonas stutzeri).在此基础上,利用含硝酸盐模拟废水,探讨了碳源类型、C/N(碳氮比)、初始pH、溶解氧(以不同摇床转速表征不同浓度的溶解氧)和培养温度对菌株HK13反硝化脱氮能力的影响,确定了该菌株的最优生长条件和最大脱氮效率.结果表明:(1)菌株HK13最适反硝化脱氮条件为以柠檬酸钠碳源,C/N 8,培养温度35℃,初始pH 8～10,摇床转速100 r/min.(2)初始ρ(NO₃^--N)为106.67 mg/L下,反应12 h后菌株HK13对TN的去除率可达92.62%;反应9～12 h时,该菌株的脱氮速率最高,可达20.03 mg/(L·h),其16 h的脱氮率在98%以上,且无亚硝酸盐积累.(3)菌株HK13适宜生长的温度和pH范围广泛,分别为20～40...     

水溶性吸收剂对甲苯废气的吸收性能

液体吸收法应用于处理工业有机废气涉及到2个关键因素,即吸收剂的选择与吸收液的再生处理. 选择8种水溶性吸收剂——2种氟碳表面活性剂(FSO100和FSN100)、2种非离子表面活性剂〔TW80(吐温80)和SP20(斯盘20)〕、2种阴离子表面活性剂〔脂肪醇聚氧乙烯醚硫酸钠(AES)和脂肪醇聚氧乙烯醚羧酸钠(AEC)〕及2种类表面活性剂〔β-CD(β-环糊精)和SA(乙酸钠), 对模拟甲苯废气进行了动力学吸收试验,研究吸收性能和加热蒸馏法对甲苯回收与吸收剂溶液再生的可行性. 结果表明:吸收剂类型是影响甲苯吸收能力的最主要因素. 2种氟碳表面活性剂吸收液的甲苯吸收能力最强,其次是SP20与AES,而其他4种吸收剂溶液对甲苯的吸收能力很弱. 上述3类吸收剂对甲苯的初始去除率分别为80%～90%、75%左右与60%～70%,甲苯饱和吸收浓度(以w计)分别为0.58～3.45、0.38～1.44与0.14～1.01 mg/g. 除TW80吸收液热稳定性差、不宜采用加热蒸馏方法再生外, 其他吸收剂溶液经5次重复使用,甲苯回收率可达70%～85%,并能保持其原有吸收性能. 甲苯分配系数计算结果表明,FSO100和FSN100分别为0.41、0.62, SP20和AES分别为0.76、0.95, 其他4种吸收剂溶液在1.12～3.54之间;甲苯分配系数与饱和吸收浓度呈负相关、与体积传质系数呈正相关. 因此,2种氟碳表面活性剂吸收液对甲苯的吸收能力强,加热蒸馏法回收甲苯与再生吸收液具有经济性,用于处理甲苯废气具有广泛的应用前景.