Origin of middle rare earth element enrichment in acid mine drainage-impacted areas

The commonly observed enrichment of middle rare earth elements (MREE) in water sampled in acid mine drainage (AMD)-impacted areas was found to be the result of preferential release from the widespread mineral pyrite (FeS₂). Three different mining-impacted sites in Europe were sampled for water, and various pyrite samples were used in batch experiments with diluted sulphuric acid simulating AMD-impacted water with high sulphate concentration and high acidity. All water samples independent on their origin from groundwater, creek water or lake water as well as on the surrounding rock types showed MREE enrichment. Also the pyrite samples showed MREE enrichment in the respective acidic leachate but not always in their total contents indicating a process-controlled release. It is discussed that most probably complexation to sulphite (SO₃ ^2?) or another intermediate S-species during pyrite oxidation is the reason for the MREE enrichment in the normalized REE patterns.     

The last decade in ecological climate change impact research: where are we now?

Climate change is increasingly affecting organisms and ecosystems. The amount of research and the number of articles in this field is overwhelming. However, single studies necessarily consider limited aspects. Hence, there is an increasing need for structuring the research approaches and findings in climate change research in order to direct future action in an efficient way towards research gaps and areas of uncertainty. Here, we review the current state of knowledge accumulated over the last 10 years (2003–2012) about impacts of climate change on species and ecosystems. Almost 1,200 articles of the scientific literature listed in the ISI Web of Science are analysed. We explore the geographical distribution of knowledge gain, the studied taxonomic groups, ecosystems and environmental parameters as well as the applied methods. Several knowledge gaps arise. Most of the first authors of the analysed articles are residents of North America, Australia or Europe. A similar pattern is found for the study areas. Vascular plants and therewith forests are the most studied taxonomic group and ecosystem. The use of models to estimate potential impacts of climate change is well established in climate change impact research and is continuously developing. However, there is a lack of empirical data derived from experimental climate change simulations. In a rapidly evolving research landscape, this review aims at providing an overview of the current patterns of knowledge distribution and research demands arising from knowledge gaps and biases. Our results should help to identify future research needs and priorities.     

Evidence for life history changes in high-altitude populations of three perennial forbs

Relatively little is known about how the life histories of perennial forb species, and especially their lifetime patterns of growth, vary across environmental gradients. We used a post hoc approach (herb-chronology) to determine plant age and previous growth (width of successive annual rings in roots) in three species of perennial forb (two long-lived species [Penstemon venustus, Lupinus laxiflorus] and one short-lived [Rudbeckia occidentalis]) along a 1000-m altitudinal gradient in the Wallowa Mountains (northeast Oregon, USA). Plants from the highest altitude tended to be considerably older and produced up to five times as many flowering shoots as lowland plants. In addition, mean ring widths of high-altitude plants were about half those of lowland plants. In plants from low and intermediate altitudes, ring width either decreased linearly or varied inconsistently during the life of the plant. In contrast, ring widths of high-altitude plants increased at first and later decreased, resulting in curvilinear growth trajectories that were highly consistent among species. Together, these data for three ecologically distinct forb species provide evidence of a consistent shift toward more conservative and strongly constrained life histories at higher altitudes. More generally, the results indicate the possible importance of changes in selection pressures across strong environmental gradients on life history strategies within a single species.     

Multi-component analysis of polar water pollutants using sequential solid-phase extraction followed by LC-ESI-MS

A multi-component screening analysis method for polar to medium-polar water pollutants was developed. Sample clean-up and group separation are performed by sequential solid-phase extraction (SSPE) using automated SPE with C18 and polymeric sorbent materials. Analyses are performed by liquid chromatography electrospray ionization mass spectrometry (LC-ESI-MS) using a single-quadrupole instrument. More than 90 priority compounds of environmental interest--comprising the most important chemical and substance classes: phenols, carboxylic acids, aromatic sulfonates, aromatic amines, pharmaceuticals, surfactants, dyes, and pesticides--have been chosen for the experiments. The compounds are divided by the SSPE procedure into 3 different polarity classes. The extraction recoveries were determined in the 3 fractions for every single substance, and were for most of the analytes in the range of 50-100%. A mixture of hexane-dichloromethane was used for the elution of nonpolar compounds like alkylphenols from C18. Methanol and acetone are well suited for the elution of more polar substances. The limits of detection (LODs) were determined for all compounds. Effluents from municipal and industrial wastewater treatment plants (WWTPs) treating waste water from textile industries; and the corresponding receiving waters (rivers and lakes) have been analysed with the developed method. Urban and industrial pollution was observed in rivers and streams in the area north of Milan, Italy. In the water samples different phenols (nitrophenols, bisphenol A, nonylphenol), alkylphenol ethoxylate surfactants, their metabolites with endocrine disrupting potential, aromatic sulfonates, linear alkylbenzenesulfonate surfactants, dyes, pesticides, pharmaceuticals, and a dichlorobenzidine compound were identified.     

A multi-year study following BACI design reveals no short-term impact of <Emphasis Type="Italic">Bti</Emphasis> on chironomids (Diptera) in a floodplain in Eastern Austria

Short-term impacts of aerial application of Bacillus thuringiensis israelensis (Bti) on Culicidae and Chironomidae were investigated over several years in temporary waters of the Dyje and Morava floodplains in Eastern Austria. The sampling followed a Before-After-Control-Impact (BACI) approach with sampling dates immediately before and shortly after the application and was repeated for 3 years. To test for effects of the Bti treatment on the two Diptera families, linear mixed-effects models were used. Data analysis included the factors Before-After and Control-Impact as fixed effects, while general temporal and spatial variables were random effects. One hundred sixteen taxa of chironomids were identified. Abundance varied between 2 and 1125 larvae per m², while culicid densities reached values of several 100 ind. per liter. Total culicid abundance significantly decreased after the Bti treatment, whereas no significant effects were found on the abundance of total chironomids and dominant chironomid subfamilies, tribes, and genera, on relative proportions of chironomid feeding guilds, diversity, and species composition. Further studies from this area are needed to extend the investigation over a period of several weeks in order to reveal possible delayed effects of the larvicide application.     

Determinants of brominated flame retardants in breast milk from a large scale Norwegian study

Brominated flame retardants (BFRs), particularly polybrominated diphenyl ethers (PBDEs), are widely present in human populations. In order to investigate human exposure pathways and associations with socioeconomic and lifestyle factors, 393 breast milk samples from mothers living in various regions throughout Norway were analyzed. Up to ten PBDE congeners were measured in all the samples, hexabromocyclododecane (HBCD) and BDE-209 in subsets of 310 and 46, respectively. The median concentrations of the sum of the seven most prominent PBDEs (BDE-28, 47, 99, 100, 153, 154 and 183), BDE-209 and HBCD were 2.1, 0.32 and 0.86 ng/g lipids, respectively. These concentrations are comparable to the levels generally observed in human populations in Europe. The frequency distributions were quite skewed with long tails towards higher concentrations. Maternal age, parity, education, having a cohabitant employed as electrician, and ventilation were factors significantly associated with some of the BFRs, although these factors only explained a small amount of the variability (R² 0.04–0.16). The mothers' diet was not found to influence the breast milk PBDE and HBCD levels. Our results show that sources other than the diet are important for the variability seen in breast milk BFR concentrations and that exposure from the indoor atmosphere should be emphasized in future studies.     

Main differences on European regulations in the frame of the Seveso Directive

Since the first Seveso Directive was issued 25 years ago, each Member State of the European Union developed own regulations to enforce its application. The lack of a common approach generated differences between Member States, or even between regions within a Member State, which in practical terms caused that establishments falling under the field of application of the Seveso Directive face a different level of requirements. This situation causes significantly different impact on social, technical and financial aspects.Factors like industrial background, accidental history, actual land use, social attitude towards risk, economical and political structures play an important role in how the decisions about hazardous activities are perceived and handled.Answering the question: “Is there a right methodology for the assessment of the risk of major accidents?” may be sterile or impossible. Many tools are appropriate and the main concern is to use them properly. Technically, the causes and consequences of, e.g., a fire in a port in Spain on the Mediterranean Sea or in the port of Basel (Switzerland) in the Rhine River could be assessed using the same methods and criteria, but this is not usually the case.This paper shows, with practical examples, the differences existing while applying different regulations in the field of prevention of major accidents and the potential effects that these differences may generate regarding the definition and management of emergency plans outside establishments.If the existing unequal situation is not faced, the comparative disagreements between Member States will prevail. Therefore, the application of the Seveso Directive will generate a different impact on the society, operators and regulators, and may become a factor which may cause a risk transfer between Member States. Efforts should be addressed to harmonize criteria in this subject.     

Occurrence of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in Lake Maggiore (Italy and Switzerland)

Samples of air (gas and particulate phases), bulk deposition, aquatic settling material and sediments were collected in Lake Maggiore (LM) in order to determine their content of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Air (gas and particulate phases) concentrations were 0.5 pg m(-3), 80 pg m(-3), 13 pg m(-3) and 106 pg m(-3) for SigmaPCDD/Fs, SigmaPCBs, Sigma dioxin-like PCBs (DL-PCBs) and SigmaPBDEs, respectively. Deposition fluxes ranged from 0.7 ng m(-2) d(-1) for SigmaPCDD/Fs to 32 ng m(-2) d(-1) for SigmaPCBs. Aquatic settling material presented concentrations of 0.4 ng g(-1) dry weight (dw) for SigmaPCDD/Fs, 13 ng g(-1) dw for SigmaPCB, 3.4 ng g(-1) dw for SigmaDL-PCBs and 5.7 ng g(-1) dw for SigmaPBDEs. Mean sediment concentrations were 0.4 ng g(-1) dw for SigmaPCDD/Fs, 11 ng g(-1) dw for SigmaPCB, 3 ng g(-1) dw for SigmaDL-PCBs and 5.1 ng g(-1) dw for SigmaPBDEs. Similar PCDD/F and DL-PCB congener patterns in all the environmental compartments of LM point to an important, if not dominant, contribution of atmospheric deposition as source of these pollutants into LM. In contrast, PBDE congener distribution was not similar in the different environmental compartments. BDE 47 dominated air and settling material, while BDE 209 was the predominant congener in the bulk atmospheric deposition. Moreover, sediments showed two distinct PBDE congener profiles. Lower PBDE concentrated sediments were dominated by congeners 47 and 99, while BDE 209 dominated in higher PBDE concentrated samples. This suggests the influence of local sources as well as atmospheric input of PBDEs into LM.     

Detecting and correcting sensor drifts in long-term weather data

Quality control of long-term monitoring data of thousands and millions of individual records as present in meteorological data is cumbersome. In such data series, sensor drifts, stalled values, and scale shifts may occur and potentially result in flawed conclusions if not noticed and handled properly. However, there is no established standard procedure to perform quality control of high-frequency meteorological data. In this paper, we outline a procedure to remove sensor drift in high-frequency data series using the example of 15-year-long sets of hourly relative humidity (RH) data from 28 stations subdivided into 202 individual sensor operation periods. The procedure involves basic quality control, relative homogeneity testing, and drift removal. Significant sensor drifts were observed in 40.6 % of all sensor operation periods. The drifts varied between data series and depended in a complex, usually inconsistent way on absolute RH values; within single series for instance, a drift could be negative in the lower RH range and positive in the upper RH range. Detrending changed RH values by, on average, 1.96 %. For one fifth of the detrended data, adjustments were 2.75 % and more of the measured value, and in one tenth 4.75 % and more. Overall, drifts were strongest for RH values close to 100 %. The detrending procedure proved to effectively remove sensor drifts. The principles of the procedure also apply to other meteorological parameters and more generally to any time series of data for which comparable reference data are available.