Evidence for life history changes in high-altitude populations of three perennial forbs

Relatively little is known about how the life histories of perennial forb species, and especially their lifetime patterns of growth, vary across environmental gradients. We used a post hoc approach (herb-chronology) to determine plant age and previous growth (width of successive annual rings in roots) in three species of perennial forb (two long-lived species [Penstemon venustus, Lupinus laxiflorus] and one short-lived [Rudbeckia occidentalis]) along a 1000-m altitudinal gradient in the Wallowa Mountains (northeast Oregon, USA). Plants from the highest altitude tended to be considerably older and produced up to five times as many flowering shoots as lowland plants. In addition, mean ring widths of high-altitude plants were about half those of lowland plants. In plants from low and intermediate altitudes, ring width either decreased linearly or varied inconsistently during the life of the plant. In contrast, ring widths of high-altitude plants increased at first and later decreased, resulting in curvilinear growth trajectories that were highly consistent among species. Together, these data for three ecologically distinct forb species provide evidence of a consistent shift toward more conservative and strongly constrained life histories at higher altitudes. More generally, the results indicate the possible importance of changes in selection pressures across strong environmental gradients on life history strategies within a single species.     

Multi-component analysis of polar water pollutants using sequential solid-phase extraction followed by LC-ESI-MS

A multi-component screening analysis method for polar to medium-polar water pollutants was developed. Sample clean-up and group separation are performed by sequential solid-phase extraction (SSPE) using automated SPE with C18 and polymeric sorbent materials. Analyses are performed by liquid chromatography electrospray ionization mass spectrometry (LC-ESI-MS) using a single-quadrupole instrument. More than 90 priority compounds of environmental interest--comprising the most important chemical and substance classes: phenols, carboxylic acids, aromatic sulfonates, aromatic amines, pharmaceuticals, surfactants, dyes, and pesticides--have been chosen for the experiments. The compounds are divided by the SSPE procedure into 3 different polarity classes. The extraction recoveries were determined in the 3 fractions for every single substance, and were for most of the analytes in the range of 50-100%. A mixture of hexane-dichloromethane was used for the elution of nonpolar compounds like alkylphenols from C18. Methanol and acetone are well suited for the elution of more polar substances. The limits of detection (LODs) were determined for all compounds. Effluents from municipal and industrial wastewater treatment plants (WWTPs) treating waste water from textile industries; and the corresponding receiving waters (rivers and lakes) have been analysed with the developed method. Urban and industrial pollution was observed in rivers and streams in the area north of Milan, Italy. In the water samples different phenols (nitrophenols, bisphenol A, nonylphenol), alkylphenol ethoxylate surfactants, their metabolites with endocrine disrupting potential, aromatic sulfonates, linear alkylbenzenesulfonate surfactants, dyes, pesticides, pharmaceuticals, and a dichlorobenzidine compound were identified.     

A multi-year study following BACI design reveals no short-term impact of <Emphasis Type="Italic">Bti</Emphasis> on chironomids (Diptera) in a floodplain in Eastern Austria

Short-term impacts of aerial application of Bacillus thuringiensis israelensis (Bti) on Culicidae and Chironomidae were investigated over several years in temporary waters of the Dyje and Morava floodplains in Eastern Austria. The sampling followed a Before-After-Control-Impact (BACI) approach with sampling dates immediately before and shortly after the application and was repeated for 3 years. To test for effects of the Bti treatment on the two Diptera families, linear mixed-effects models were used. Data analysis included the factors Before-After and Control-Impact as fixed effects, while general temporal and spatial variables were random effects. One hundred sixteen taxa of chironomids were identified. Abundance varied between 2 and 1125 larvae per m², while culicid densities reached values of several 100 ind. per liter. Total culicid abundance significantly decreased after the Bti treatment, whereas no significant effects were found on the abundance of total chironomids and dominant chironomid subfamilies, tribes, and genera, on relative proportions of chironomid feeding guilds, diversity, and species composition. Further studies from this area are needed to extend the investigation over a period of several weeks in order to reveal possible delayed effects of the larvicide application.     

Project house water: a novel interdisciplinary framework to assess the environmental and socioeconomic consequences of flood-related impacts

Protecting our water resources in terms of quality and quantity is considered one of the big challenges of the twenty-first century, which requires global and multidisciplinary solutions. A specific threat to water resources, in particular, is the increased occurrence and frequency of flood events due to climate change which has significant environmental and socioeconomic impacts. In addition to climate change, flooding (or subsequent erosion and run-off) may be exacerbated by, or result from, land use activities, obstruction of waterways, or urbanization of floodplains, as well as mining and other anthropogenic activities that alter natural flow regimes. Climate change and other anthropogenic induced flood events threaten the quantity of water as well as the quality of ecosystems and associated aquatic life. The quality of water can be significantly reduced through the unintentional distribution of pollutants, damage of infrastructure, and distribution of sediments and suspended materials during flood events. To understand and predict how flood events and associated distribution of pollutants may impact ecosystem and human health, as well as infrastructure, large-scale interdisciplinary collaborative efforts are required, which involve ecotoxicologists, hydrologists, chemists, geoscientists, water engineers, and socioeconomists. The research network “project house water” consists of a number of experts from a wide range of disciplines and was established to improve our current understanding of flood events and associated societal and environmental impacts. The concept of project house and similar seed fund and boost fund projects was established by the RWTH Aachen University within the framework of the German excellence initiative with support of the German research foundation (DFG) to promote and fund interdisciplinary research projects and provide a platform for scientists to collaborate on innovative, challenging research. Project house water consists of six proof-of-concept studies in very diverse and interdisciplinary areas of research (ecotoxicology, water, and chemical process engineering, geography, sociology, economy). The goal is to promote and foster high-quality research in the areas of water research and flood-risk assessments that combine and build off-laboratory experiments with modeling, monitoring, and surveys, as well as the use of applied methods and techniques across a variety of disciplines.     

Main differences on European regulations in the frame of the Seveso Directive

Since the first Seveso Directive was issued 25 years ago, each Member State of the European Union developed own regulations to enforce its application. The lack of a common approach generated differences between Member States, or even between regions within a Member State, which in practical terms caused that establishments falling under the field of application of the Seveso Directive face a different level of requirements. This situation causes significantly different impact on social, technical and financial aspects.Factors like industrial background, accidental history, actual land use, social attitude towards risk, economical and political structures play an important role in how the decisions about hazardous activities are perceived and handled.Answering the question: “Is there a right methodology for the assessment of the risk of major accidents?” may be sterile or impossible. Many tools are appropriate and the main concern is to use them properly. Technically, the causes and consequences of, e.g., a fire in a port in Spain on the Mediterranean Sea or in the port of Basel (Switzerland) in the Rhine River could be assessed using the same methods and criteria, but this is not usually the case.This paper shows, with practical examples, the differences existing while applying different regulations in the field of prevention of major accidents and the potential effects that these differences may generate regarding the definition and management of emergency plans outside establishments.If the existing unequal situation is not faced, the comparative disagreements between Member States will prevail. Therefore, the application of the Seveso Directive will generate a different impact on the society, operators and regulators, and may become a factor which may cause a risk transfer between Member States. Efforts should be addressed to harmonize criteria in this subject.     

Polycyclic aromatic hydrocarbon (PAH) contamination of surface sediments and oysters from the inter-tidal areas of Dar es Salaam, Tanzania

Surface sediment and oyster samples from the inter-tidal areas of Dar es Salaam were analyzed for 23 polycyclic aromatic hydrocarbons (PAHs) including the 16 compounds prioritized by US-EPA using GC/MS. The total concentration of PAHs in the sediment ranged from 78 to 25,000 ng/g dry weight, while oyster concentrations ranged from 170 to 650 ng/g dry weight. Hazards due to sediment contamination were assessed using Equilibrium Partitioning Sediment Benchmarks and Threshold Effect Levels. Diagnostic indices and principle component analysis were used to identify possible sources. Interestingly, no correlation between sediment and oyster concentrations at the same sites was found. This is supported by completely different contamination patterns, suggesting different sources for both matrices. Hazard assessment revealed possible effects at six out of eight sites on the benthic communities and oyster populations. The contribution of PAH intake via oyster consumption to carcinogenic risks in humans seems to be low.     

Reproduction and survival of tawny owls in relation to persistent organic pollutants

The potential effects of organochlorines (OCs) and brominated flame retardants on reproduction and survival were studied in tawny owls (Strix aluco) in Central Norway over a period of 19 years (1986-2004). Concentrations of 14 OCs and five polybrominated diphenyl ethers (PBDEs) were measured in eggs (n=104), and Principal Component Analysis was used to produce composite measurements of pollutants; i.e. PC1 and PC2, which accounted for 85% of the variation in contaminant concentrations. There was no evidence for adverse associations between pollutants (PC scores) and life-history traits such as clutch size, probability of producing fledglings and survival, when controlling for potentially confounding variables. Moreover, there was no evidence for interactions between pollutants and vole abundance suggesting no synergistic effects of food stress and pollutants on these life-history traits. There was, however, some evidence for a non-linear negative association between p,p'-DDE (1,1-dichloro-2,2-bis (p-chlorophenyl) ethylene) and eggshell thickness. This suggests that the concentrations of pollutants in this ecosystem were too low to affect reproduction and survival in an owl predominantly consuming prey at low trophic levels, but may be sufficient to cause eggshell thinning at the highest concentrations.     

Ecological quality boundary-setting procedures: the Gulf of Riga case study

Two approaches for setting ecological class boundaries, response curves and a simplified mathematical boundary-setting protocol, were tested for coastal, transitional and open waters in the Gulf of Riga, Baltic Sea. The simplified mathematical boundary-setting protocol defines acceptable ecological status based on expert judgment by a uniform relative deviation from reference conditions. In contrast, response curves derive class boundary definitions from observed changes in biological quality elements along environmental pressure gradients for class boundary definitions. Identification of relevant environmental pressures for the construction of response curves was based on a conceptual model of eutrophication in the Gulf of Riga. Response curves were successfully established for summer chlorophyll a and transparency, as well as for macrozoobenthos abundance in the Central Gulf, macrozoobenthos biotic coefficient in the Southern Gulf, and maximum depth of phytobenthos in the Northern Gulf. In the Gulf of Riga response curves almost always permitted a larger deviation from reference conditions than the 50% deviation applied for the simplified mathematical boundary-setting protocol. The case study clearly demonstrated that class boundary definitions should take into account the sensitivity of the target water body. Also, the class boundaries for different ecological quality elements were internally more consistent than those derived by the simplified mathematical boundary-setting protocol.     

Empirical relationship between precision and ultra-trace concentrations of PCDD/Fs and dioxin-like PCBs in biological matrices

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.