Sustainable Development in an N-Rich/N-Poor World

Sustainable development requires that per capita inclusive wealth—produced, human, and natural capital—does not decline over time. We investigate the impact of changes in nitrogen on inclusive wealth. There are two sides to the nitrogen problem. Excess use of nitrogen in some places gives rise to N-pollution, which can cause environmental damage. Insufficient replacement of nitrogen in other places gives rise to N-depletion, or loss of nutrient stocks. Neither is explicitly accounted for in current wealth measures, but both affect wealth. We calculate an index of net N-replacement, and investigate its relationship to wealth. In countries with low levels of relative N-loss, we find that the uncompensated loss of soil nitrogen in poorer countries is associated with declining rates of growth of inclusive per capita wealth. What is less intuitive is that increasing fertilizer application in both rich and poor countries can increase per capita inclusive wealth.     

The challenge of adapting centralised electricity systems: peak demand and maladaptation in South East Queensland,Australia

South East Queensland’s (SEQ’s) centralised electricity system is under great pressure to adapt. Climate change is converging with socio-economic, demographic and technological changes to create a ‘perfect storm’ for the region’s electricity system. Distribution networks are particularly affected, with these factors contributing to tremendous peak demand growth, about double the rate of growth in average demand in recent years. This paper reviews how Australia’s electricity system is adapting to multiple drivers of peak electricity demand. We use socio-technical transitions theory to understand the temporal interconnected social and technical dimensions of adaptation in this setting. Specifically, we present an historical narrative of the emergence of centralisation in Australia and outline the peak demand problem in SEQ and review adaptation options from the international literature. We also analyse the interactions between key social groups and their adaptation responses over the past decade. Our analysis shows that adaptation has become a contested process between supply-chain actors and end-users, each with different economic objectives, adaptation needs and capacities. The resulting adaptation dynamic that is emerging shows worrying signs of maladaptation. Implications for market governance and urban policy and research are discussed.     

Coagulation of highly turbid suspensions using magnesium hydroxide: effects of slow mixing conditions

Laboratory experiments were carried out to study the effects of slow mixing conditions on magnesium hydroxide floc size and strength and to determine the turbidity and total suspended solid (TSS) removal efficiencies during coagulation of highly turbid suspensions. A highly turbid kaolin clay suspension (1,213?±?36 nephelometric turbidity units (NTU)) was alkalized to pH 10.5 using a 5 M NaOH solution; liquid bittern (LB) equivalent to 536 mg/L of Mg²⁺ was added as a coagulant, and the suspension was then subjected to previously optimized fast mixing conditions of 100 rpm and 60 s. Slow mixing speed (20, 30, 40, and 50 rpm) and time (10, 20, and 30 min) were then varied, while the temperature was maintained at 20.7?±?1 °C. The standard practice for coagulation-flocculation jar test ASTM D2035-13 (2013) was followed in all experiments. Relative floc size was monitored using an optical measuring device, photometric dispersion analyzer (PDA 2000). Larger and more shear resistant flocs were obtained at 20 rpm for both 20- and 30-min slow mixing times; however, given the shorter duration for the former, the 20-min slow mixing time was considered to be more energy efficient. For slow mixing camp number (Gt) values in the range of 8,400–90,000, it was found that the mixing speed affected floc size and strength more than the time. Higher-turbidity removal efficiencies were achieved at 20 and 30 rpm, while TSS removal efficiency was higher for the 50-rpm slow mixing speed. Extended slow mixing time of 30 min yielded better turbidity and TSS removal efficiencies at the slower speeds.     

Lead-Free Hunting Rifle Ammunition: Product Availability, Price, Effectiveness, and Role in Global Wildlife Conservation

Proposals to end the use of lead hunting ammunition because of the established risks of lead exposure to wildlife and humans are impeded by concerns about the availability, price, and effectiveness of substitutes. The product availability and retail prices of different calibers of lead-free bullets and center-fire rifle ammunition were assessed for ammunition sold in the USA and Europe. Lead-free bullets are made in 35 calibers and 51 rifle cartridge designations. Thirty-seven companies distribute internationally ammunition made with lead-free bullets. There is no major difference in the retail price of equivalent lead-free and lead-core ammunition for most popular calibers. Lead-free ammunition has set bench-mark standards for accuracy, lethality, and safety. Given the demonstrated wide product availability, comparable prices, and the effectiveness of high-quality lead-free ammunition, it is possible to phase out the use of lead hunting ammunition world-wide, based on progressive policy and enforceable legislation.     

Mobility of dimethoate residues from spring broccoli field

Dimethoate [O, O-dimethyl-S-(N-methylcarbamoyl-methyl) phosphorodithioate] is a broad-spectrum systemic insecticide currently used worldwide and on many vegetables in Kentucky. Dimethoate is a hydrophilic compound (log K_OW = 0.7) and has the potential of offsite movement from the application site into runoff and infiltration water. The dissipation patterns of dimethoate residues were studied on spring broccoli leaves and heads under field conditions. Following foliar application of Dimethoate 4E on broccoli foliage at the rate of 0.47 L acre^?1, dimethoate residues were monitored in soil, runoff water collected down the land slope, and in infiltration water collected from the vadose zone. The study was conducted on a Lowell silty loam soil (pH 6.9) planted with broccoli under three soil management practices: (i) soil mixed with municipal sewage sludge, (ii) soil mixed with yard waste compost, and (iii) no-mulch rototilled bare soil. The main objective of this investigation was to study the effect of mixing native soil with municipal sewage sludge or yard waste compost, having considerable amounts of organic matter, on off-site movement of dimethoate residues into runoff and infiltration water following spring rainfall. The initial deposits of dimethoate were 6.2 and 21.4 μ g g^?1 on broccoli heads and leaves, respectively. These residues dissipated rapidly and fell below the maximum residue limit of 2 μ g g^?1 on the heads and leaves after 10 and 14 d, respectively, with half-lives of 5.7 d on broccoli heads and 3.9 d on the leaves. Dimethoate residues detected in top 15 cm of soil (due to droplet drift and wash off residues from broccoli foliage) one day (d) following spraying, were 30.5 ng g^?1 dry soil in the sewage sludge treatment, and 46.1 and 134.5 ng g^?1 dry soil in the yard waste and no mulch treatments, respectively. Water infiltration was greater from yard waste compost treatment than from no mulch treatment, however concentrations of dimethoate in the vadose zone of the three soil treatments did not differ.     

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary.     

Ground level volume mixing ratio of methane in a tropical coastal city

Urban regions are hotspots of greenhouse gas emissions which include CO₂, CH₄, N₂O, etc. Methane is a strong greenhouse gas which is produced from a number of sources including fossil fuel combustion, municipal waste, and sewage processing, etc. Ground level mixing ratio of methane in the tropical coastal city of Thiruvananthapuram in South India, during calm early morning period was measured. Measurements were done during both winter and summer seasons. Concentrations were significantly higher than global average value. Intra-city variation in ground level mixing ratio was also significant. Ground level methane concentration at Thiruvananthapuram urban area showed maximum value of 3.16 ppmV. Under stable atmospheric conditions in early morning, ground level mixing ratio of methane was 2.79 ppmV in winter and 2.54 ppmV during summer. The spatial distribution of methane concentration shows correlation with urban heat island.     

Urban Water Supply Strategies for Hyderabad, India – Future Scenarios

To keep pace with population and economic growth, the city of Hyderabad, India, will need to identify and develop new supply sources almost continually. Increasing population growth rate, declining surface water resources, overexploitation of groundwater, deterioration of ground water quality and poor sewage treatment are the major water-related issues in Hyderabad. This paper reviews the current situation facing policy makers who need to come to terms with the problem of restricted water supply and increasing demand in an urban centre such as Hyderabad, India. The City Water Balance model developed in this study can be used to analyse different scenarios that include water conservation, urban wastewater reuse and improvement of distribution and conveyance efficiency. Water conservation programs, which include a 5% conveyance efficiency improvement, reusing 90 million cubic metres (MCM) of urban runoff and adoption of water harvesting by 0.5 million households together with recycling 120 MCM of wastewater recycling wastewater would be sufficient to meet the water demand by 2031, if the population grows at a rate of 2.5%.     

PM10 in the ambient air of Chandrapur coal mine and its comparison with other environments

This study compares the ambient air particulate matter (PM10) data of 15 different coal mine environments. For most of these mine environments, the monitoring was carried out by different researchers using respirable dust sampler (RDS) that separates PM10 by centrifugal inertial separation. At two sites — Padmapur and Ghugus (Chandrapur, Maharashtra, India) — mass inertial impaction-based sampler was used for PM10 monitoring. It is observed that the spatiotemporal average value of ambient air PM10 monitored using mass inertial impactor reports relatively higher values (240–372 μg/m³) compared to those monitored using RDS (<227 μg/m³). In order to realize the severity of mine area pollution, it is compared with PM10 values found in an urban area (Delhi, India). It is found that PM10 values in Delhi (using mass inertial impactor) are much higher (300–400 μg/m³) than those reported for the mine environment. The data seems to indicate that the mine environment is relatively cleaner than urban air and therefore raises doubt about the appropriateness of using either mass impactor or RDS for PM10 sampling.     

Nutrient environment of red tide- infested waters off south-west coast of India

The bloom-infested waters along the southwest coast of India were assessed to bring about the probable cause related to the excessive algal production. Low nitrate and silicate concentrations were concomitant with slightly higher levels of phosphate. The silicate depletion in the bloom area is possibly an indication of community succession (diatom to dinoflagellate), since it was completely utilized by the preceding diatom blooms. The dinoflagellates in this region could have been advected from the northern regions where it was noticed during the previous months.