Burial survival of benthic macrofauna following deposition of simulated dredged material

In many coastal regions, the disposal of dredged material constitutes the largest (albeit often localised) anthropogenic disturbance to the seabed. Impacts can be minimised by reducing the amount of sediment overburden on the bed at any one time allowing short-term recovery to proceed via the vertical migration of resident species. However, there is currently a limited understanding of the ability of such species to successfully vertically migrate. This study presents the findings of a field experiment to investigate the vertical migratory capability of temperate macroinvertebrate species following the placement of simulated dredged material. The relationships between vertical migration success with sediment characteristics (organic carbon and sand content) and placement depth were explicitly examined. While the polychaete worms Tharyx sp. A. and Streblospio shrubsolii showed poor vertical migration with only 6 cm of sediment overburden, the oligochaete Tubificoides benedii showed some recovery while the gastropod mollusc Hydrobia ulvae exhibited good migratory success, even with 16 cm of sediment overburden. While increases in sand content from 16% to 38% had no noticeable effect on vertical migration, increased sediment organic content from 0.8% to 3.3% detrimentally affected vertical migratory activity. The results support the theory that species' survival following sediment burial is trophic group-related. The relevance of these findings with respect to dredged material disposal management is discussed.     

Open space index: a GIS-based tool for assessing human penetration of a landscape

In light of the rapid and continuous growth of the built environment worldwide and its attendant ecological impact, increasing the size and distribution of open space in urban areas is recognised as one effective way to reconcile the social and ecological objectives of society. However, there is no simple and objective indicator to measure open space that can be used for creating and maintaining sustainable landscapes. The paper introduces a metric, open space index (OSI), that measures the amount of space unpenetrated by the built environment. The metric is calculated by measuring the shortest distance between any location and the nearest built environment using a Geographic Information System. The metric is illustrated using two counties of the greater Twin Cities Metropolitan Region of Minnesota. The sensitivity of OSI to the size, shape, and spatial configuration of the built environment suggests that the metric can serve as an important planning tool for reconciling conservation and development in a wide range of contexts.     

Evaluation of alternative filter media for particulate matter emission testing of residential wood heating devices

The performance of Teflon-coated glass fiber filter media (Pallflex Emfab TX40) is evaluated for particulate matter (PM) sampling of residential wood heating devices in a dilution tunnel. Thirty samples of varying duration and PM loading and concentration were collected from an U.S. Environmental Protection Agency (EPA) Method 28 dilution tunnel using dual Method 5G sample trains with untreated glass fiber and Emfab filters. Filters were weighed soon after the end of sampling and again the next day after equilibration at 35% relative humidity (RH). PM concentrations from both types of filters agreed very well with 1-day equilibration, demonstrating that Emfab filters are appropriate for use in measuring PM from residential wood burning appliances in a dilution tunnel and have performance equal to or better than the glass fiber filter media. Agreement between filter media without equilibration was erratic, with PM from glass fiber filter samples varying from slightly less than the Emfab samples to as much as 2.8 times higher. Some of the glass fiber filters lost substantial mass with equilibration, with the highest percent loss at lower filter mass loadings. Mass loss for Emfab samples was a small percentage of the mass and very consistent across the range of mass loadings. Taken together, these results may indicate water uptake on the glass fiber media that is readily removed with 1-day equilibration at moderate RH conditions.

Implications: EPA regulations now allow the use of either glass fiber or Teflon filter media for wood appliance PM emission testing. Teflon filter media minimizes the potential for acid-gas PM artifacts on glass fiber filters; this is important as EPA moves toward the use of locally sourced cordwood for testing that may have higher sulfur content. This work demonstrates that the use of Teflon-coated glass fiber filters can give similar PM measurement results to glass fiber filters after 1 day of equilibration. With no equilibration, measured PM from glass fiber filters was usually higher than from Teflon-coated glass fiber filters.     

Optimum design of the entrance of a fishpond laterally to the main stream of an open channel

In this study, the optimum design of the entrance of a fishpond laterally to the main flow of an open channel was investigated numerically and experimentally. The flow characteristic measurements were realized with the PIV (particle image velocimetry) method. The mathematical simulations were based on the development of a two dimensional -mean in depthhydrodynamic model and a quasi three dimensional sediment transport model which includes processes of advection, diffusion, and settling of conservative suspended matter. The study was completed with the comparison of the final results of the mathematical models with the findings of the physical model revealing the hydrodynamic interaction and coupling between the main flow of the channel and the lateral reservoir—fishpond and leading to the optimum technical design of the system.     

Determination of relative assay response factors for toxic chlorinated and brominated dioxins/furans using an enzyme immunoassay (EIA) and a chemically-activated luciferase gene expression cell bioassay (CALUX)

Determination of toxic activity requires knowledge of both the concentration and toxicity to evaluate the risk for adverse human health and environmental effects. A chemically-activated luciferase gene expression cell bioassay system (CALUX) and an antibody-based method enzyme immunoassay (EIA) were used to detect the dioxin-like response of several polybrominated, polychlorinated, and polybrominated/chlorinated dibenzo-p-dioxins/furans (PBDDs/Fs, PCDDs/Fs, and PBCDDs/Fs, respectively). It has been suggested that the biological activity of the brominated and mixed bromo/chloro compounds is similar to their chlorinated analogues (measured by binding to the Ah receptor). PBDD/F, PCDD/F, and PBCDD/F laboratory standards exhibited biological activity ranging over three orders of magnitude. The highest relative potency (REP) values from CALUX analysis, when compared to 2,3,7,8-TCDD, were 2,3,7,8-TBDD at 0.99 (± 0.07), 1,2,3,7,8-PeCDD at 0.69, and 2-Br-3,7,8-TriCDD at 0.72 (± 0.02). Cross-reactivities were calculated using EIA for several PBDDs/Fs and PBCDDs. The highest percent cross-reactivity was found for 2,3,7,8-TBDD at 138 (± 34%), and 2,3,7-TriBDD at 84 (± 36%).     

Thallium in the Environment and Health Effects

Thallium is present in the natural environment in low concentration, being found most frequently in the sulphide ores of a number of heavy metals. Atmospheric emission and deposition from industrial sources has resulted in raised levels in the vicinity of mineral smelters, coal burning power plants, brick works and cement plants. In contaminated areas, raised levels are found in vegetables, fruit and in farm animals. Thallium is used industrially in small quantities, with uses in electronics, in the production of certain glasses and crystals and in medical diagnostics. It has in the past been commonly used as a rodenticide, but its use has now been banned in many countries. Thallium salts are now considered to be amongst the most toxic compounds known. With regard to population exposure, an epidemiological study in an area with high thallium concentrations in soil and garden vegetables centred on a cement plant, has found evidence of a dose response relationship between thallium concentration in urine and a number of non-specific subjective symptoms. Much further research is required to investigate the possible adverse health effects of thallium following population exposure.     

CONSTRAINTS IN WATER MANAGEMENT ON AGRICULTURAL LANDS1

ABSTRACT Whether the goal is minimizing water quality degradation in receiving streams or maximizing agricultural production on existing croplands; the solutions are identical - improved water management practices. Technology has succeeded in developing feasible solutions to improving irrigation water management, but the law has been slow to encourage or direct implementation. The villain of the western United States water problem is the property right concept of the appropriation doctrine. Improving water management also implies organizational improvements. Also, the so-called “human factor” involves questions of inefficiency and ineffectiveness, that when examined under the criteria of efficacy, may dictate a policy of continuing present practices in certain localities or regions with little technological intervention. The present effort for improving water quality management implies, therefore, a manyfold attack aimed at increasing project irrigation efficiency and effectiveness, under the larger rubric of efficacy and the achievement of larger social goals.     

Monitoring Fish Contaminant Responses to Abatement Actions: Factors that Affect Recovery

Monitoring of contaminant accumulation in fish has been conducted in East Fork Poplar Creek (EFPC) in Oak Ridge, Tennessee since 1985. Bioaccumulation trends are examined over a twenty year period coinciding with major pollution abatement actions by a Department of Energy facility at the stream’s headwaters. Although EFPC is enriched in many contaminants relative to other local streams, only polychlorinated biphenyls (PCBs) and mercury (Hg) were found to accumulate in the edible portions of fish to levels of human health concern. Mercury concentrations in redbreast sunfish were found to vary with season of collection, sex and size of individual fish. Over the course of the monitoring, waterborne Hg concentrations were reduced >80%; however, this did not translate into a comparable decrease in Hg bioaccumulation at most sites. Mercury bioaccumulation in fish did respond to decreased inputs in the industrialized headwater reach, but paradoxically increased in the lowermost reach of EFPC. As a result, the downstream pattern of Hg concentration in fish changed from one resembling dilution of a headwater point source in the 1980s to a uniform distribution in the 2000s. The reason for this remains unknown, but is hypothesized to involve changes in the chemical form and reactivity of waterborne Hg associated with the removal of residual chlorine and the addition of suspended particulates to the streamflow. PCB concentrations in fish varied greatly from year-to-year, but always exhibited a pronounced downstream decrease, and appeared to respond to management practices that limited episodic inputs from legacy sources within the facility.     

A national critical loads framework for atmospheric deposition effects assessment: IV. Model selection,applications, and critical loads mapping

The critical loads approach is emerging as an attractive means for evaluating the effects of atmospheric deposition on sensitive terrestrial and aquatic ecosystems. Various approaches are available for modeling ecosystem responses to deposition and for estimating critical load values. These approaches include empirical and statistical relationships, steady-state and simple process models, and integrated-effects models. For any given ecosystem, the most technically sophisticated approach will not necessarily be the most appropriate for all applications; identification of the most useful approach depends upon the degree of accuracy needed and upon data and computational requirements, biogeochemical processes being modeled, approaches used for representing model results on regional bases, and desired degree of spatial and temporal resolution. Different approaches are characterized by different levels of uncertainty. If the limitations of individual approaches are known, the user can determine whether an approach provides a reasonable basis for decision making. Several options, including point maps, grid maps, and ecoregional maps, are available for presenting model results in a regional context. These are discussed using hypothetical examples for choosing populations and damage limits. The research described in this article has been funded by the US Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, Oregon, through contract #68-C8-0006 with ManTech Environmental Technology, Inc., and Interagency Agreement #1824-B014-A7 with the U.S. Department of Energy and at Oak Ridge National Laboratory managed by Martin Marietta Energy Systems, Inc., under Contract DE-AC05-84OR21400 with the US Department of Energy. Environmental Sciences Division Publication No. 3904. It has been subjected to the agency’s peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.