Remote Sensing Tools Assist in Environmental Forensics. Part I: Traditional Methods

This is part one of a two-part discussion, in which we will provide an overview of the use of aerial photography, topographic mapping and photogrammetry in environmental enforcement actions. The visualization of spatial relationships of natural and man-made features can focus the scope of environmental investigation, and provide a simple, yet quantitative, historical record of changes in conditions on a site. Aerial photography has been used in environmental remote sensing since the early part of the 20th century. Aerial photos are valuable tools for environmental assessment because they provide objective, detailed documentation of surface conditions at a specific time. Furthermore, they can generally be obtained even in cases where access on the ground is denied to investigators. From aerial photos, precise quantitative information can be collected using photogrammetry. Such measurement and positional data can be produced in digital format for input into a Geographic Information System (GIS) for computerized analysis and display. Other information derived from aerial photographs requires specialized photointerpretive skills and experience. These include the recognition of vegetation mortality, oil-spill damage, and the ecological quality of water bodies. The location, extent and historical change of hazardous waste sites can be documented on topographic maps. These maps are often created from aerial photographs, and display the extent and location of real-world features by symbolizing them. The major advantage of maps over aerial photos is that maps can show things that are not visible from the air, while omitting unnecessary and distracting information. Because maps are derived products, they may contain bias in content and presentation, and they must be backed up by careful documentation and quality assurance protocols.     

Ion Composition Elucidation (ICE): an Investigative Tool for Characterization and Identification of Compounds of Regulatory Importance

Ion composition elucidation (ICE) often leads to identification of compounds and provides high-quality evidence for tracking compounds to their sources. Mass spectra for most organic compounds are not found in mass spectral libraries used to tentatively identify analytes. In addition, multiple matches are common. Ion Composition Elucidation provides the numbers of atoms of each element in the ions in the mass spectrum, greatly limiting the number of possible compounds that could produce the mass spectrum. Review of chemical and commercial literature then limits the number of possible compounds to one or a few that can be purchased to confirm tentative compound identifications by comparison of mass spectra and chromatographic retention times. Ion composition elucidation is conceptually simple relative to other analytical techniques and more easily explained to a judge or jury. It is based on sums of the exact masses of atoms and their isotopic abundances. Several applications of ICE are demonstrated for ultra-trace-level compounds in an extract of the e.uent from a tertiary sewage treatment plant including: (1) measurement of five values to determine an ion's composition and to generate evidence for the compound's identity, (2) rejection of incorrect library matches, (3) rapid screening for a target compound in an extract, and (4) a strategy for tracking unidentified compounds to their sources.     

Evaluation of the giant reed (Arundo donax) in horizontal subsurface flow wetlands for the treatment of dairy processing factory wastewater

Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental horizontal subsurface flow (HSSF), gravel-based constructed wetlands (CWs) and challenged by treated dairy processing factory wastewater with a median electrical conductivity of 8.9 mS cm(-1). The hydraulic loading rate was tested at 3.75 cm day(-1). In general, the plants grew well during the 7-month study period, with no obvious signs of salt stress. The major water quality parameters monitored (biological oxygen demand (BOD), suspended solids (SS) and total nitrogen (TN) but not total phosphorus) were generally improved after the effluent had passed through the CWs. There was no significance different in removal efficiencies between the planted beds and unplanted gravel beds (p?>?0.007), nor was there any significant difference in removal efficiencies between the A. donax and P. australis beds for most parameters. BOD, SS and TN removal in the A. donax and P. australis CWs was 69, 95 and 26 % and 62, 97 and 26 %, respectively. Bacterial removal was observed but only to levels that would allow reuse of the effluent for use on non-food crops under Victorian state regulations. As expected, the A. donax CWs produced considerably more biomass (37?±?7.2 kg wet weight) than the P. australis CWs (11?±?1.4 kg wet weight). This standing crop equates to approximately 179 and 68 tonnes ha(-1) year(-1) biomass (dry weight) for A. donax and P. australis, respectively (assuming a 250-day growing season and single-cut harvest). The performance similarity of the A. donax and P. australis planted CWs indicates that either may be used in HSSF wetlands treating dairy factory wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilisation of the biomass produced.     

Guiding principles for rewilding

There has been much recent interest in the concept of rewilding as a tool for nature conservation, but also confusion over the idea, which has limited its utility. We developed a unifying definition and 10 guiding principles for rewilding through a survey of 59 rewilding experts, a summary of key organizations’ rewilding visions, and workshops involving over 100 participants from around the world. The guiding principles convey that rewilding exits on a continuum of scale, connectivity, and level of human influence and aims to restore ecosystem structure and functions to achieve a self-sustaining autonomous nature. These principles clarify the concept of rewilding and improve its effectiveness as a tool to achieve global conservation targets, including those of the UN Decade on Ecosystem Restoration and post-2020 Global Biodiversity Framework. Finally, we suggest differences in rewilding perspectives lie largely in the extent to which it is seen as achievable and in specific interventions. An understanding of the context of rewilding projects is the key to success, and careful site-specific interpretations will help achieve the aims of rewilding.     

Revisiting ISO 14001 diffusion among national terrains: panel data evidence from OECD countries and the BRIICS

Environmental Economics and Policy Studies - Being one of the primary soft-voluntary environmental policy instruments, ISO 14001 has been studied from a number of diverse perspectives and...     

Using fisher-contributed secondary fins to fill critical shark-fisheries data gaps

Developing-world shark fisheries are typically not assessed or actively managed for sustainability; one fundamental obstacle is the lack of species and size-composition catch data. We tested and implemented a new and potentially widely applicable approach for collecting these data: mandatory submission of low-value secondary fins (anal fins) from landed sharks by fishers and use of the fins to reconstruct catch species and size. Visual and low-cost genetic identification were used to determine species composition, and linear regression was applied to total length and anal fin base length for catch-size reconstruction. We tested the feasibility of this approach in Belize, first in a local proof-of-concept study and then scaling it up to the national level for the 2017–2018 shark-fishing season (1,786 fins analyzed). Sixteen species occurred in this fishery. The most common were the Caribbean reef (Carcharhinus perezi), blacktip (C. limbatus), sharpnose (Atlantic [Rhizoprionodon terraenovae] and Caribbean [R. porosus] considered as a group), and bonnethead (Sphyrna cf. tiburo). Sharpnose and bonnethead sharks were landed primarily above size at maturity, whereas Caribbean reef and blacktip sharks were primarily landed below size at maturity. Our approach proved effective in obtaining critical data for managing the shark fishery, and we suggest the tools developed as part of this program could be exported to other nations in this region and applied almost immediately if there were means to communicate with fishers and incentivize them to provide anal fins. Outside the tropical Western Atlantic, we recommend further investigation of the feasibility of sampling of secondary fins, including considerations of time, effort, and cost of species identification from these fins, what secondary fin type to use, and the means with which to communicate with fishers and incentivize participation. This program could be a model for collecting urgently needed data for developing-world shark fisheries globally. Article impact statement: Shark fins collected from fishers yield data critical to shark fisheries management in developing nations.     

Characteristics of Moose-vehicle Collisions in Anchorage, Alaska, 1991–1995

Moose have successfully adapted to Anchorage's urban environment, using greenbelt areas for shelter, forage, and protection from nearby predator populations. However, the proximity of moose to people poses unique hazards: a motor vehicle colliding a moose may cause significant injury and vehicle damage. The annual Moose Vehicle Collision (MVC) rate increased during the study period from 40 to 52 MVCs per 100,000 registered vehicles in Anchorage, a significant (X² = 7.8, p < 0.01) increase of 23%. Of 519 reported MVCs, 23% resulted in injury to 158 people, with no human fatalities. Collisions were 2.6 times more likely to have occurred in the dark (n = 375, [72%]) than during daylight hours. An MVC on a dry road was twice (95% CI: 1.29, 3.08) as likely to have resulted in an injury as an incident on a slick road. MVCs may be prevented by: reducing speed limits around greenbelt areas, brighter vehicle headlights, placement of street lights in known moose areas, underpasses for wildlife at known crossings, and snow removal to reduce berm height in areas of high moose concentrations. Published by National Safety Council and Elsevier Science Ltd     

Treatment of benzene and n-hexane mixtures in trickle-bed air biofilters

Trickle-bed air biofilters (TBABs) are suitable for treatment of hydrophilic volatile organic compounds, but they pose a challenge for hydrophobic compounds. Three laboratory-scale TBABs were used for the treatment of an airstream contaminated with different ratios of n-hexane and benzene mixtures. The ratios studied were 1:1, 2:1, and 1:3 n-hexane:benzene by volume. Each TBAB was operated at a pH of 4 and a temperature of 20 degrees C. The use of acidic-buffered nutrient solution was targeted for changing the microorganism consortium to fungi as the main biodegradation element. The experimental plan was designed to investigate the long-term performance of the TBABs with an emphasis on different mixture loading rates, removal efficiency with TBAB depth, volatile suspended solids, and carbon mass balance closure. n-Hexane loading rate was kept constant in the TBABs for comparison reasons and ranged from 4 to 22 g/(m3 x hr). Corresponding benzene loadings ranged from 4 to 43 g/(m3 x hr). Generally, benzene behavior in the TBAB was superior to that of n-hexane because of its higher solubility. n-Hexane showed improved performance in the 2:1 mixing ratio as compared with the other two ratios.     

Mitigation of dimethazone residues in soil and runoff water from agricultural field

Dimethazone, also known as clomazone [2-[(2-chlorophenyl) methyl]- 4,4-dimethyl-3-isoxaolidinone] is a pre-emergent nonionic herbicide commonly used in agriculture. A field study was conducted on a silty-loam soil of 10 % slope to monitor off-site movement and persistence of dimethazone in soil under three management practices. Eighteen plots of 22 x 3.7 m each were separated using stainless steel metal borders and the soil in six plots was mixed with municipal sewage sludge (MSS) and yard waste (YW) compost (MSS+YW) at 15 t acre?1 on dry weight basis, six plots were mixed with MSS at 15 t acre?1, and six unamended plots (NM) were used for comparison purposes. The objectives of this investigation were to: (i) monitor the dissipation and half-life (T?/?) of dimethazone in soil under three management practices; (ii) determine the concentration of dimethazone residues in runoff and infiltration water following natural rainfall events; and (iii) assess the impact of soil amendments on the transport of NO?, NH?, and P into surface and subsurface water. Gas chromatography/mass spectrometery (GC/MS) analyses of soil extracts indicated the presence of ion fragments at m/z 125 and 204 that can be used for identification of dimethazone residues. Intitial deposits of dimethazone varied from 1.3 μg g?1 dry native soil to 3.2 and 11.8 μg g?1 dry soil in MSS and MSS+YW amended soil, respectively. Decline of dimethazone residues in the top 15 cm native soil and soil incorporated with amendments revealed half-life (T?/?) values of 18.8, 25.1, and 43.0 days in MSS+YW, MSS, and NM treatments, respectively. Addition of MSS+YW mix and MSS alone to native soil increased water infiltration, lowering surface runoff water volume and dimethazone residues in runoff following natural rainfall events.