Influence of spontaneous vegetation in stormwater infiltration system clogging

The paper presents the role of spontaneous vegetation on the hydraulic performance of an infiltration basin. The objective of the research was more particularly to study this role of different types of spontaneous vegetation found in situ in an infiltration basin near Lyon. The saturated hydraulic conductivity of three areas covered by Phalaris arundinacea, Polygonum mite, Rumex crispus and similar non-vegetated zones was compared. Eight field campaigns were carried out from July 2010 to May 2011 in order to compare the performance of each type of vegetation and its evolution over time. The results suggest a positive impact of vegetation on hydraulic performance in particular in summer during the growth of the plants. The hydraulic conductivity in this period was twice to four times higher than in bare areas or in vegetated zones during the plant rest periods. Some species were also found more appropriate to limit clogging (Phalaris arundinacea) likely due to its specific structure and growth process.     

Spatial variability of sediment ecotoxicity in a large storm water detention basin

Detention basins are valuable facilities for urban storm water management, from both the standpoint of flood control and the trapping of pollutants. Studies performed on storm water have shown that suspended solids often constitute the main vector of pollutants (heavy metals, polycyclic aromatic hydrocarbon (PAH), etc.). In order to characterise the ecotoxicity of urban sediments from storm water detention basins, the sediments accumulated over a 6-year period were sampled at five different points through the surface of a large detention basin localised in the east of Lyon, France. A specific ecotoxicological test battery was implemented on the solid phase (raw sediment) and the liquid phase (interstitial water of sediments). The results of the study validated the method formulated for the ecotoxicological characterization of urban sediments. They show that the ecotoxicological effect of the sediments over the basin is heterogeneous and greater in areas often flooded. They also show the relationship between, on one hand, the physical and chemical characteristics of the sediments and, on the other hand, their ecotoxicity. Lastly, they contribute to a better understanding of the dynamics of the pollution close to the bottom of detention basins, which can be useful for improving their design. The results of this research raise particularly the issue of using oil separators on the surface of detention basins.     

Influence of sugar cane vinasse on the sorption and degradation of herbicides in soil under controlled conditions

This study reports the influence of sugar cane vinasse on the persistence, sorption and leaching potential of diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea), hexazinone (3-cyclohexyl-6-(dimethylamino)-1-methyl-1,3,5-triazine-2,4-dione) and tebuthiuron (1-(5-tert-butyl-1,3,4-thiadiazol-2-yl)-1,3-dimethylurea) in both a clay and sandy soil from a tropical area of Brazil. The experiments were conducted out under controlled laboratory conditions. The addition of sugarcane vinasse to soil influenced the persistence and sorption of the herbicides in both the studied clay and sandy soils, with a considerable decrease in the diuron DT₅₀ values in clay soil. The Ground Water Ubiquity Score (GUS) Index classifies the herbicides as leachers in both soils and treatments, with the exception of diuron, which is classified as a non-leacher in clay soil-vinasse and as a transient herbicide in sandy soil. These results suggest that special attention should be given to areas such as those where the sandy soil was collected in this study, which is a recharge area of the Guarani Aquifer and is likely to experience groundwater contamination due to the high leaching potential of the applied pesticides.     

From classic methodologies to application of nanomaterials for soil remediation: an integrated view of methods for decontamination of toxic metal(oid)s

Soil pollution with toxic elements is a recurrent issue due to environmental disasters, fossil fuel burning, urbanization, and industrialization, which have contributed to soil contamination over the years. Therefore, the remediation of toxic metals in soil is always an important topic since contaminated soil can affect the environment, agricultural safety, and human health. Many remediation methods have been developed; however, it is essential to ensure that they are safe, and also take into account the limitation of each methodology (including high energy input and generation of residues). This scenario has motivated this review, where we explore soil contamination with arsenic, lead, mercury, and chromium and summarize information about the methods employed to remediate each of these toxic elements such as phytoremediation, soil washing, electrokinetic remediation, and nanoparticles besides elucidating some mechanisms involved in the remediation. Considering all the discussed techniques, nowadays, different techniques can be combined together in order to improve the efficiency of remediation besides the new approach of the techniques and the use of one technique for remediating more than one contaminant.     

Characterization of black crusts developed on historic stones with diverse mineralogy under different air quality environments

Environmental Science and Pollution Research - Black crusts (BCs) are one of the most critical alteration forms found on stones belonging to architectural heritage. Since they could be considered...     

Sunlight-driven environmental photodegradation of 2-chlorobiphenyl (PCB-1) in surface waters: kinetic study and mathematical simulations

Environmental Science and Pollution Research - Polychlorinated biphenyls (PCBs) are a family of highly toxic, resistant, and persistent organic pollutants, among which 2-chlorobiphenyl (PCB-1) is...     

Synthesis of an organic–inorganic composite from calcium carbonate and Kraft lignin and its use as carrier material for controlled release of semiochemical agents

Environmental Science and Pollution Research - The control of pests in agricultural systems is currently based on the widespread use of pesticides that efficiently control pests but have negative...     

Consumption of low-density polyethylene,polypropylene, and polystyrene materials by larvae of the greater wax moth,Galleria mellonella L. (Lepidoptera,Pyralidae), impacts on their ontogeny

Low-density polyethylene (LDPE), biaxially oriented polypropylene (BOPP), and expanded polystyrene (EXPS) are the most common plastics found in every home of the world, but only ~ 10% enter the recycling chains. Consequently, the study of plastic biodegradation by microorganisms and insects, such as the wax moths, has gained special interest. Galleria mellonella (L.) has been shown to consume single-layered polyethylene and polystyrene, though biological impacts of this consumption have been rarely reported. We evaluated the consumption of different plastics by G. mellonella larvae (L7, mean size: 25–30 mm) and its effect on larval duration, survival, and development. For this, we offered the larvae five diets: single-layered LDPE, EXPS, BOPP, triple-layered polyethylene (SB, for silo-bags), and a control with beeswax. We recorded the state and weight of the materials and the state of larvae until they reached the adult stage. Larvae consumed more PE (both LDPE and SB) and EXPS than BOPP; still, they were able to emerge as adults in all treatments. Larvae that consumed plastics turned into pupal stage faster than those that consumed beeswax, regardless of the type and amount of plastic consumed. This is the first report of wild G. mellonella larvae in Argentina consuming biaxially polypropylene and silo-bags.

     

Quality of the surface water of a basin affected by the expansion of the agricultural frontier over the native forest in the Argentine Espinal region

Environmental Science and Pollution Research - Land use changes have led to the degradation of multiple ecosystem services and affected the quality of aquatic ecosystems. The aims of this study...     

Effect modification of ambient particle mortality by radon: A time series analysis in 108 U.S. cities

Numerous studies have reported a positive association between ambient fine particles and daily mortality, but little is known about the particle properties or environmental factors that may contribute to these effects. This study assessed potential modification of radon on PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm)-associated daily mortality in 108 U.S. cities using a two-stage statistical approach. First, city- and season-specific PM_2.5 mortality risks were estimated using over-dispersed Poisson regression models. These PM_2.5 effect estimates were then regressed against mean city-level residential radon concentrations to estimate overall PM_2.5 effects and potential modification by radon. Radon exposure estimates based on measured short-term basement concentrations and modeled long-term living-area concentrations were both assessed. Exposure to PM_2.5 was associated with total, cardiovascular, and respiratory mortality in both the spring and the fall. In addition, higher mean city-level radon concentrations increased PM_2.5-associated mortality in the spring and fall. For example, a 10 µg/m³ increase in PM_2.5 in the spring at the 10th percentile of city-averaged short-term radon concentrations (21.1 Bq/m³) was associated with a 1.92% increase in total mortality (95% CI: 1.29, 2.55), whereas the same PM_2.5 exposure at the 90th radon percentile (234.2 Bq/m³) was associated with a 3.73% increase in total mortality (95% CI: 2.87, 4.59). Results were robust to adjustment for spatial confounders, including average planetary boundary height, population age, percent poverty and tobacco use. While additional research is necessary, this study suggests that radon enhances PM_2.5 mortality. This is of significant regulatory importance, as effective regulation should consider the increased risk for particle mortality in cities with higher radon levels.

Implications: In this large national study, city-averaged indoor radon concentration was a significant effect modifier of PM_2.5-associated total, cardiovascular, and respiratory mortality risk in the spring and fall. These results suggest that radon may enhance PM_2.5-associated mortality. In addition, local radon concentrations partially explain the significant variability in PM_2.5 effect estimates across U.S. cities, noted in this and previous studies. Although the concept of PM as a vector for radon progeny is feasible, additional research is needed on the noncancer health effects of radon and its potential interaction with PM. Future air quality regulations may need to consider the increased risk for particle mortality in cities with higher radon levels.