Recycling-oriented characterization of polyolefin packaging waste

Packaging waste is one of the main sources of secondary polyolefins. It is essential to characterize polyolefins derived from this waste stream in such way, that not only mechanical sorting methods can effectively separate, but also that on-line sensor systems can quantitatively assess their distribution. The characterization methodology is hierarchical, relating all properties of waste particles in any phase of the processing ultimately to the input End-Of-Life products. The present paper documents a pre-concentrate obtained by hand picking of mixed Romanian household waste. Investigations have been addressed to identify the composition of this polyolefin waste stream, to study the polyolefin density distribution, to distinguish the polymer manufacturing methods (i.e. injection molding and blow molding) by flake physical properties and finally to perform all the required characterization and identification by hyperspectral imaging. On the basis of these analyses, polyolefins from packaging wastes can be recycled by density separation and their rheological properties and wall thickness indicate the molding procedures. Hyperspectral imaging based procedures have been also applied to set up quality control actions for recycled products.     

Safety management systems: Performance differences between adopters and non-adopters

The aim of this paper is to assess, through an empirical investigation, whether the performance of safety management systems (SMSs) adopting and non-adopting companies statistically differ. To achieve such aim, empirical data were collected on a sample of 116 companies, encompassing both SMSs adopters and non-adopters. Hypotheses testing was performed to assess whether SMSs adopters experience significantly higher performance against (i) definition of safety and security goals and their communication to employees; (ii) risk data updating and risk analysis; (iii) identification of risks and definition of corrective actions; (iv) employees training. Results show that companies adopting SMSs exhibit higher performance against all the topics identified. These outcomes could be the starting point for providing empirical evidence of benefits achievable thanks to SMSs implementation.     

Environmental Effectiveness of Swine Sewage Management: A Multicriteria AHP-Based Model for a Reliable Quick Assessment

Environmental issues related to swine production are still a major concern for the general public and represent a key challenge for the swine industry. The environmental impact of higher livestock concentration is particularly significant where it coincides with weaker policy standards and poor manure management. Effective tools for environmental monitoring of the swine sewage management process become essential for verifying the environmental compatibility of farming facilities and for defining suitable policies aimed at increasing swine production sustainability. This research aims at the development and application of a model for a quick assessment of the environmental effectiveness of the pig farming sewage management process. In order to define the model, multicriteria techniques, and in particular, Saaty’s analytic hierarchy process, were used to develop an iterative process in which the various key factors influencing the process under investigation were analyzed. The model, named EASE (Environmental Assessment of Sewages management Effectiveness), was optimized and applied to the Lake Trasimeno basin (Umbria, Italy), an area of high natural, environmental and aesthetic value. In this context, inadequate disposal of pig sewage represents a potential source of very considerable pollution. The results have demonstrated how the multicriteria model can represent a very effective and adaptable tool also in those decision-making processes aimed at the sustainable management of livestock production.     

Calcitic-based stones protection by a low-fluorine modified methacrylic coating

Environmental Science and Pollution Research - Atmospheric pollutants, such as NOx, SO2, and particulate matter, together with water percolation inside the stone pores, represent the main causes of...     

Herbicide contamination of surficial groundwater in Northern Italy

Data on herbicide pollution in groundwater are rather scarce; monitoring data are based on single investigation, focussing on limited area and on few compounds of interest. The large number of approved active ingredients (approximately 600 chemicals) makes difficult to obtain an accurate and actual information on herbicide application in different countries, even if herbicides are the second most important class of pesticides used in the European Union. The results of a two-year monitoring campaign undertaken in two areas intensively cultivated at Lombardy, Northern Italy, showed a diffuse groundwater contamination due to active ingredients and their metabolites. More than 50% of samples overcame M.A.C. and the most common herbicides were Atrazine, Terbuthylazine and Metolachlor, while DEA and DET metabolites were often characterized by greater concentrations than their relative active principles.     

HEAVY METAL DISTRIBUTION AND SPECIATION IN THE NORTHERN ADRIATIC SEA

In the present study the concentrations of cobalt, copper, iron, manganese, zinc were analysed and the speciation of copper and zinc performed, with a summer and winter sampling, for two areas in the Northern Adriatic Sea and crossing at the farthest zones of the Po river-sea water interface. Results show that when salinity increases the concentrations of all investigated metals (with the exception of cobalt) present some degree of biogeochemical cycling. Copper is the element whose dissolved phase has the highest importance in metal transport across the salinity gradient. Results of speciation analysis demonstrate that the presence of excess amounts (5-8 fold) of unbound ligands confers a buffering capacity for potential inputs of dissolved metals into the Northern Adriatic Sea. The speciation of both copper and zinc in the dissolved phase was dominated by organic complexation.     

Heavy metal removal from industrial effluents by sorption on cross-linked starch: chemical study and impact on water toxicity

Batch sorption experiments using a starch-based sorbent were carried out for the removal of heavy metals present in industrial water discharges. The influence of contact time, mass of sorbent and pollutant load was investigated. Pollutant removal was dependent on the mass of sorbent and contact time, but independent of the contaminant load. The process was uniform, rapid and efficient. Sorption reached equilibrium in 60 min irrespective of the metal considered (e.g. Zn, Pb, Cu, Ni, Fe and Cd), reducing concentrations below those permitted by law. The material also removed residual turbidity and led to a significant decrease in the residual chemical oxygen demand (COD) present in the industrial water discharge. The germination success of lettuce (Lactuca sativa) was used as a laboratory indicator of phytotoxicity. The results show that the sorption using a starch-based sorbent as non-conventional material, is a viable alternative for treating industrial wastewaters.     

A new generation of coastal monitoring platforms

The need for new instruments and systems for environment monitoring encouraged the development of a network of coastal platforms combining a high versatility with ease of use and affordability. Almost every instrument can be fitted on the platforms, thanks to the large amount of available power provided by both solar panels and wind generators. All the platforms host a pumping system that pumps water from five depths into a measurement chamber where a multiparametric probe is fitted and from where other devices (e.g. samplers or analysers) can draw samples. In situ temperature measurements are provided at the same pumping depths. A colorimetric nutrient analyser and a meteorological station complete the basic equipment. On one of the platforms, a remotely controlled water sampler and an ADCP are also fitted. The data-acquisition and transmission system enables the platform to be controlled remotely using a special macro-commands set. Several examples of use are presented.