Dechlorination of PCBs in the simulative transformer oil by microwave-hydrothermal reaction with zero-valent iron involved

The conventional hydrothermal reaction with iron powder, NaOH and H₂O as reactants was reported to occur at temperature above 423 K, and iron oxides (Fe₃O₄ and NaFeO₂) and hydrogen were produced. In this study, microwave heating was adopted to take the place of conventional heating to induce the hydrothermal reaction. Under microwave irradiation, NaOH and H₂O absorbed microwave energy by space charge polarization and dipolar polarization and instantly converted it into thermal energy, which initiated the hydrothermal reaction that involved with zero-valent iron. X-ray diffraction (XRD) analysis found Fe₃O₄/NaFeO₂ and confirmed the occurrence of microwave-induced hydrothermal reaction. The developed microwave-hydrothermal reaction was employed for the dechlorination of PCBs. Hexadecane containing 100 mg L⁻¹ of Aroclor1254 was used as simulative transformer oil, and the dechlorination of PCBs was evaluated by GC/ECD, GC/MS and ion chromatography. For PCBs in 10 mL simulative transformer oil, almost complete dechlorination was achieved by 750 W microwave irradiation for 10 min, with 0.3 g iron powder, 0.3 g NaOH and 0.6 mL H₂O added. The effects of important factors including microwave power and the amounts of reactants added, on the dechlorination degree were investigated, moreover, the dechlorination mechanism was suggested. Microwave irradiation combined with the common and cheap materials, iron powder, NaOH and H₂O, might provide a fast and cost-effective method for the treatment of PCBs-containing wastes.     

Biotoxicity of nickel oxide nanoparticles and bio-remediation by microalgae Chlorella vulgaris

Adverse effects of manufactured nickel oxide nanoparticles on the microalgae Chlorellavulgaris were determined by algal growth-inhibition test and morphological observation via transmission electron microscopy (TEM). Results showed that the NiO nanoparticles had severe impacts on the algae, with 72 h EC(50) values of 32.28 mg NiOL(-1). Under the stress of NiO nanoparticles, C. vulgaris cells showed plasmolysis, cytomembrane breakage and thylakoids disorder. NiO nanoparticles aggregated and deposited in algal culture media. The presence of algal cells accelerated aggregation of nanoparticles. Moreover, about 0.14% ionic Ni was released when NiO NPs were added into seawater. The attachment of aggregates to algal cell surface and the presence of released ionic Ni were likely responsible for the toxic effects. Interestingly, some NiO nanoparticles were reduced to zero valence nickel as determined by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. The maximum ratios of nickel reduction was achieved at 72 h of exposure, in accordance with the time-course of changes in soluble protein content of treated C. vulgaris, implying that some proteins of algae are involved in the process. Our results indicate that the toxicity and bioavailability of NiO nanoparticles to marine algae are reduced by aggregation and reduction of NiO. Thus, marine algae have the potential for usage in nano-pollution bio-remediation in aquatic system.     

The dissipation rates of trichlorfon and its degradation product dichlorvos in cabbage and soil

The residual levels and dissipation rate of trichlorfon, and its degradation product, dichlorvos, in cabbage crops and the soil in which these were grown, were determined by gas chromatography at two geographically distant experimental sites, one in Kunming and one in Beijing, China. Trichlorfon was applied at two dosages (900 g ai ha⁻¹ and 1350 g ai ha⁻¹). Maximum final residues of trichlorfon in soil and cabbage were 1.23 mg kg⁻¹ and 1.81 mg kg⁻¹ respectively at Kunming, and 0.35 mg kg⁻¹ and 0.70 mg kg⁻¹ respectively at Beijing. However, the final residues of dichlorvos in both cabbage and soil was only 0.04 mg kg⁻¹ at Kunming, and only 0.03 mg kg⁻¹, or “not detectable”, at Beijing. The mean half-life of trichlorfon in cabbage was 1.80 d with a dissipation rate of 90% over 5 d, while that in soil was 3.05 d with a dissipation rate of 90% over 14 d at one experimental site. The dissipation rates of trichlorfon and its degradation product dichlorvos at the two experimental sites were different, suggesting that degradation of these pesticides was affected by local soil characteristics and climate. When applied at both the recommended dosage and at 1.5 times this, no detectable residues of either trichlorfon or dichlorvos were found in soil or cabbage at harvest. Although trichlorfon can easily degrade into dichlorvos, which is highly toxic to humans and other animals, the observed low residual levels of dichlorvos suggest that trichlorfon is safe when applied at the recommended dosage.     

Peroxidase-mediated removal of endocrine disrupting compound mixtures from water

Several classes of oxidative enzymes have shown promise for efficient removal of endocrine disrupting compounds (EDCs) that are resistant to conventional wastewater treatments. Although the kinetics of reactions between individual EDCs and selected oxidative enzymes are well documented in the literature, there has been little investigation of reactions with EDC mixtures. This makes it impossible to predict how enzyme-mediated treatment systems will perform since wastewater effluents generally contain multiple EDCs. This paper reports pseudo-first order rate constants for a model oxidative enzyme, horseradish peroxidase (HRP), during single-substrate (k₁) and mixed-substrate (k_1-MIX) reactions. Measured values are compared with literature values of three Michaelis-Menten parameters: half-saturation constant (K_M), enzyme turnover number (k_CAT), and the ratio k_CAT/K_M. Published reports had suggested that each of these could be correlated with HRP reactivity towards EDCs in mixtures, and empirical results from this study show that K_M can be used to predict the sequence of EDC removal reactions within a particular mixture. We also observed that k_1-MIX values were generally greater than k₁ values and that compounds exhibiting greatest estrogenic toxicities reacted most rapidly in a given mixture. Finally, because K_M may be tedious to measure for every EDC of interest, we have constructed a quantitative structure-activity relationship (QSAR) model to predict these values. This model predicts K_M quite accurately (R² = 89%) based on two molecular characteristics: molecular volume and hydration energy. Its accuracy makes this QSAR a useful tool for predicting which EDCs will be removed most efficiently during enzyme treatment of EDC mixtures.     

微絮凝-直接过滤工艺用于东江流域典型印染废水回用的实验研究

以东莞地区某典型印染企业尾水为研究对象,针对东江流域饮用水源河流水质污染现状及纳污河流水质改善目标要求与企业对尾水回用的实际需求,进行了印染废水深度处理回用工艺的适用性研究.通过混凝烧杯实验,选用工业PACl、FeSO4、HPAC 3种药剂,对微絮凝-直接过滤集成工艺用于印染废水尾水深度处理后水质回用的可行性,进行了实...     

香溪河流域土地利用格局演变对非点源污染的影响研究

以分布式模型SWAT为研究工具,在气候、土壤等因素不变的情况下,模拟了三峡库区香溪河流域土地利用格局演变对于非点源污染的影响.研究结果表明,自20世纪80年代至2007年,研究区由土地利用所造成的非点源污染TN总体呈减少趋势,4种土地利用情景下模拟得到的年均非点源污染TN分别为1 841.60、824.86、1 790...     

天津市污水再生利用经验与现状分析

对天津市污水再生利用发展现状进行了分析,总结了以双膜工艺为核心的天津污水再生利用工艺的运行管理经验.在上述基础上分析了天津市污水再生利用中存在的问题,并针对推动再生水产业发展提出总体对策,为我国再生水技术和行业的发展提供参考.     

两点进水条件下多种A2/O工艺的运行效果

在两点进水的条件下采用A2/O工艺处理化工园区废水厌氧水解出水,分析配水比对A2/O工艺处理效果的影响,以及在最优配水条件下,各类A2/O工艺处理废水的实际效果.结果表明,在厌氧段-缺氧段的配水比为30%～70%时,A2/O工艺的处理效果最好.在两点进水条件下的各类A2/O工艺中,倒置A2/O和改良A2/O比常规A2/...     

恶臭假单胞菌降解苯酚的动力学研究

研究了恶臭假单胞菌（Pseudomonas putida LY1）利用苯酚作为唯一碳源和能源时的生长动力学特性。通过对该菌株在不同温度、pH和初始苯酚浓度下的生长和降解情况的研究,可知该菌株在温度为25℃左右、pH为中性和偏碱性的条件下具有更高的降解活性。细菌的生长动力学过程符合基质抑制型的Haldane方程,可利用该...     

给水曝气生物滤池内置粉末活性炭复合净水效果的研究

在给水曝气生物滤池内置粉末活性炭,对比分析其对各工艺单元水质净化效果的影响,确定给水曝气生物滤池内置粉末活性炭的作用与最佳投加量,研究表明,给水曝气生物滤池将活性炭截留在滤池内,大幅度提高了粉末活性炭利用率,部分未饱和粉末活性炭通过反冲洗排入后续常规处理系统,作为生物载体仍能够进一步发挥生物强化作用。当粉末活性炭的投加量为8 mg/L时,砂滤出水氨氮、CODMn、浊度和色度均值分别为：0.02 mg/L,1.82 mg/L0,.46 NTU和6度,去除率分别达到99.6%、71.2%、99.1%和80.6%,出水指标达到《生活饮用水卫生标准（》GB5749-2006）和《饮用净水水质标准（》CJ94-2005）规定的标准。与常规工艺相比,投加量降低了20%～60%。