Antibiotics along an alpine river and in the receiving lake with a catchment dominated by grazing husbandry

The livestock breeding industries face overuse of antibiotics, which has been intensively studied in recent years. However, the occurrence and fate of antibiotics as well as their potential threats to the aquatic environments in alpine and arid regions remain unclear. This study investigated the relationship of the occurrence and concentrations of antibiotics between the Kaidu River and Bosten Lake in a typical alpine basin in China. Hot spots with antibiotic pollution source were explored. The antibiotic concentrations in river water and suspended sediment (SPS) were 2.20-99.4 ng/L and 1.03-176 ng/g. The dominant antibiotics were tetracyclines, sulphacetamide, and ofloxacin in river water and sulfonamides, clarithromycin, roxithromycin, and ofloxacin in SPS. The apparent differences in pollution sources and landscapes in different reaches led to the obvious spatial patterns of antibiotics in the Kaidu River. Higher partition coefficient of antibiotic between SPS and water phases for sulfonamides than tetracyclines was because that tetracyclines strongly responded to clay contents while sulfonamides significantly responded to organic carbon contents in SPS. There were significant differences in detected antibiotic categories between the river and the lake. Fluoroquinolones (especially ciprofloxacin and enrofloxacin) were detected in the lake while sulphacetamide was only detected in the river. Therefore, the surrounding husbandry and aquaculture around the Bosten Lake was an important antibiotic pollution source in addition to inputs from the Kaidu River. This research suggested that alpine lakes could be an important sink of antibiotics in alpine dry regions, and thus impose greater threats to the aquatic ecosystem.     

生态城市评价指标体系构建及实证研究

构建了针对秦皇岛市的生态城市评价指标体系,采用多指标综合评价法,对2011年秦皇岛市城市生态化程度进行了评价。结果表明:秦皇岛市城市生态化综合指数为0.687,生态化程度为2级水平,经济持续发展子系统和资源能源节约子系统较为薄弱。根据评价结果,提出了大力发展循环经济、加强水污染治理、提高资源能源利用效率、加大生态建设力度等建议。     

Recovery of Cu and Fe from Printed Circuit Board waste sludge by ultrasound: Evaluation of industrial application

The paper presents a novel cleaner process for metal recovery from the Printed Circuit Board (PCB) waste sludge by assistance of ultrasound. The process can effectively recover heavy metals at low cost with high separation and recovery efficiency, produce high quality products and also achieve zero waste discharge with operation at industrial scale. With the PCB waste sludge containing (wet content) 3.14–4.85% copper and 3.71–4.23% iron, copper recovery efficiency of 95.2–97.5% and iron recovery efficiency of 97.1–98.5% were achieved, while the purity of copper sulfate produced by the process was 98.0% and the produced ferric chloride had a satisfied quality for using as a coagulant material for the plant on-site wastewater treatment. The process had been successfully scaled up to the industrial scaled applications in a heavy metal recovery plant in city of Huizhou, China for more than two years. The novel cleaner heavy metal recovery process has a great prospect on the applications of resources recovery and environmental protection practices.     

Shellac-coated iron oxide nanoparticles for removal of cadmium(II) ions from aqueous solution

This study describes a new effective adsorbent for cadmium removal from aqueous solution synthesized by coating a shellac layer, a natural biodegradable and renewable resin with abundant hydroxyl and carboxylic groups, on the surface of iron oxide magnetic nanoparticles. Transmission Electron Microscopy (TEM) imaging showed shellac-coated magnetic nanoparticle (SCMN) adsorbents had a core-shell structure with a core of 20 nm and shell of 5 nm. Fourier Transform Infrared Spectroscopic analysis suggested the occurrence of reaction between carboxyl groups on the SCMN adsorbent surface and cadmium ions in aqueous solution. Kinetic data were well described by pseudo second-order model and adsorption isotherms were fitted with both Langmuir and Freundlich models with maximum adsorption capacity of 18.80 mg/g. SCMN adsorbents provided a favorable adsorption capacity under high salinity conditions, and cadmium could easily be desorbed using mild organic acid solutions at low concentration.     

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

污泥基活性炭的制备、表征及其应用

以城市生活污水厂脱水车间污泥为原料,采用化学活化法(ZnCl2为活化剂)在活化剂浓度为45%、活化温度为600℃、浸渍温度为45℃、活化时间为50min条件下制备污泥基活性炭。对污泥基活性炭进行了孔结构、扫描电镜(SEM)、红外光谱(FTIR)、XRD等表征分析。结果表明:该条件下制备出的污泥基活性炭碘吸附值为427.51mg/g,比表面积为329.48m2/g,大孔、中孔、微孔容积分别为0.19,0.12,0.15cm3/g。平均孔径为3.953nm。将其应用于生活污水处理,考察了污泥基活性炭投加量、pH、吸附时间对其吸附性能的影响。     

Fenton氧化对污泥脱水性能和溶解性物质作用效果的研究

研究了Fenton氧化技术在改善污泥脱水性能方面的效果,以污泥比阻和毛细吸水时间来表征污泥的脱水性能,探讨了体系的pH和反应时间对污泥脱水性能的影响以及Fenton氧化对污泥溶解性物质(SCOD+多聚糖+蛋白质)含量的影响研究表明,Fenton氧化能够明显改善污泥的脱水性能。在体系的pH=3时,反应1h后,Fenton氧化处理后污泥的CST从处理前的130.9s减少到19.7s,降幅85%;污泥SRF从处理前的3.58×108 s2/g降低到1.05×107 s2/g,降幅97%。同体系处理污泥SCOD、上清液中多聚糖和蛋白质的含量分别增加了3.7倍、2.6倍和1.5倍。     

哈尔滨市区区域环境噪声分析

随着人们环境保护意识的增强和对环境质量要求的提高,声环境质量已成为影响城市人民生活的一个重要污染指标,城市的不断发展,使噪声污染越来越成为人们日益关注的环境问题之一。采用定点测量方法和噪声分析仪进行监测,对哈尔滨市区区域环境噪声的监测结果进行了分析,监测结果表明:生活在低分贝值区域的人口逐渐增多,哈尔滨市环境状况有所好转。     

江苏里下河腹部地区湖泊湖荡春季浮游植物群落结构和营养状态

以江苏省里下河腹部地区38个典型湖泊湖荡为研究对象,分析了春季浮游植物群落结构特征及其与环境因子的关系,运用了基于理化指标的综合营养状态指数(TLI)评价方法和基于浮游植物群落结构分析的生物指标(Shannon-Wiener多样性指数H′和Pielou均匀度指数J)评价方法,评价了湖泊湖荡营养状态.结果显示共采集到里下河腹部地区湖泊湖荡浮游植物7门50属89种,主要隶属于绿藻门(Chlorophyta)和硅藻门(Bacillariophyta);浮游植物细胞丰度介于2.3×10~5～3.7×10~7 cells·L~(-1),生物量介于0.05～15.02 mg·L~(-1),绿藻门与隐藻门(Cryptophyta)在细胞丰度上占优势,隐藻门在生物量上占优势;梅尼小环藻(Cyclotella meneghiniana)、啮蚀隐藻(Cryptomonas erosa)、尖尾蓝隐藻(Chroomonas acuta)、四尾栅藻(Scenedesmus guadricauda)为主要优势种;生物指标评价方法的结果显示湖泊湖荡总体为轻度富营养,与TLI评价方法的结果有较好一致性,表明两类评价方法在里下河腹部地区具有较强内在关联性.     

Removal of polycyclic aromatic hydrocarbons from different soil fractions by persulfate oxidation

Removal of polycyclic aromatic hydrocarbons (PAHs) from different soil fractions of contaminated soil was investigated by using activated persulfate oxidation remediation in our research. The results showed that the light fraction, which accounted for only 10% of the soil, contained 30% of the PAHs at a concentration of 4352?mg/kg. The heavy fraction contained more high-molecular-weight PAHs, and the total PAH concentration was 625?mg/kg. After being oxidized, the removal rate of PAHs was 39% in the light fraction and nearly 90% in the heavy fraction. Among the different fractions of the heavy fraction, humic acid contained the highest concentration of PAHs, and consequently, the highest removal efficiency of PAHs was also in humic acid. Compared with the light fraction, the heavy fraction has more aromatic compounds and those compounds were broken down during the oxidation process, which may be the removal mechanism involved in the oxidation of high-ring PAHs. Similarly, the enhancement of C = C bonds after oxidation can also explain the poor removal of high-ring PAHs in the light fraction. These results imply that different fractions of soil vary in composition and structure, leading to differences in the distribution and oxidation efficiencies of PAHs.