Distribution and availability of potentially toxic metals in soil in central area of Belgrade,Serbia

Belgrade, capital city of Serbia, has over 1,600,000 inhabitants and over 400,000 vehicles trafficking every day on its streets. The investigation of soil pollution was performed by sequential extraction analysis to investigate the availability of potentially toxic metals (Zn, Cd, Pb, Co, Ni, Cu, Cr and Mn) under different oxidation and pH conditions. All investigated metals were mainly extracted from soils with neutral or acidic extractants. Serious pollution was observed along roads and streets with high traffic frequency, but Pb and Ni pollution was the highest since their concentrations exceed both soil Serbian standard and Canadian guidance values and is characteristic for all investigated sites. Cd, Cu, Cr and Zn concentrations are moderately high since they are between Canadian guideline and Serbian standard.     

Suspended particulate matter dynamics in a particle framework

Suspended particulate matter (SPM) dynamics in ocean models are usually treated with an advection–diffusion equation for one or more sediment size classes coupled to the hydrodynamical part of the model. Numerical solution of these additional partial differential equations unavoidably introduces numerical diffusion, i.e. in the case of sharp gradients the possible occurrence of artificial oscillations and non-positivity. A Lagrangian particle-tracking model has been developed to simulate short-term SPM dynamics. Modelling individual sediment particles allows a straightforward physical interpretation of the processes. The tracking of large numbers of individual and independent particles (up to 25 million in total in a single sediment class) can be achieved on high performance computer clusters, due to efficient parallelisation of particle tracking. The movement of the particles is described by a stochastic differential equation, which is consistent with the advection–diffusion equation. Here, the concentration profile is represented by a set of independent moving particles, which are advected according to the 3D velocity field, while the diffusive displacements of the particles are sampled from a random distribution, which is related to the eddy diffusivity field. To account for erosion a new parameterisation is proposed. Three numerical particle tracking schemes (EULER, MILSTEIN and HEUN) are presented and validated in idealised test cases. Finally, the particle tracking algorithms are applied to a realistic scenario, a severe winter storm in the East Frisian Wadden Sea (southern North Sea). The comparison with observations and an Eulerian SPM transport model seems to indicate a somewhat better fidelity of the Lagrangian approach.     

Monitoring of Bt-Maize pollen exposure in the vicinity of the nature reserve Ruhlsdorfer Bruch in northeast Germany 2007 to 2008

Background, aim, and scope Basically, technological innovations are associated with benefits and risks. This is also true for the introduction of genetically modified organisms (GMO) into agriculture. In Germany, precautionary regulations currently demand isolation distances (i.?e. buffer zones) for the cultivation of genetically modified maize (Bt-maize) in the vicinity of conventional (150?m) and organic maize fields (300?m). The Bt-toxin may harm non-target organisms (NTO) such as Lepidoptera. Despite this, corresponding regulations for the protection of nature reserves are lacking to date. Conventional and Bt-maize have been grown in the vicinity of the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch in Brandenburg, Germany. The aim of this study was to investigate whether exposure of maize pollen from surrounding Bt-maize fields to NTOs in the nature protection area could be excluded or not. Two types of exposure were investigated: Firstly, whether maize pollen was dispersed by wind into the nature reserve area exposing resident NTOs. Secondly, foraging NTOs from the nature reserve are exposed by roaming the surrounding fields and collecting maize pollen. In order to fulfil the precautionary principle defined by law, the study should help to determine appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of NTOs in the FFH Ruhlsdorfer Bruch. In 2007, the local authorities issued an isolation distance between Bt-maize fields and nature reserves of 100?m and in 2008, this became 250?m in the northern and 500?m in the westerly direction, respectively. Materials and methods Standardised methods for biological and technical pollen sampling issued by the Association of German Engineers (VDI 4330 Part 3, 2007 and VDI 4330 Part 4, 2006) were applied providing a quality controlled and methodologically harmonised database which does not only serve the needs to be fulfilled by the present case-specific monitoring study but can also be used as a reference database for further investigations. Maize pollen exposure was measured within the FFH Ruhlsdorfer Bruch and its immediate vicinity in July and August 2007 and 2008. In 2007, the sampling was performed at three sites using 12 technical samplers (Sigma-2/PMF) placed at five measuring points at distances from 5?m to 120?m from the maize field edges. Additionally, for biological pollen sampling six bee colonies were situated at these three sites (two colonies at each site). The technical sampler Sigma-2/PMF enables point sampling which is primarily influenced by wind and topography providing information on effective maize pollen input (flow and deposition) at the measuring sites. Honey-bees roaming in the surrounding area with typical foraging distances of several kilometres may act as planar collectors. They may serve as indicators for the exposure to pollen-collecting NTOs. Furthermore, biological sampling is more selective due to the organism’s preferences, whereas the technical sampling is neutral. Hence, both the technical and the biological sampling complement each other in their scope of application. The pollen samples of both matrices were analysed microscopically and the maize pollen loads were quantified. Pollen-DNA was analysed by means of the quantitative PCR-method (qPCR) identifying conventional and Bt-maize pollen by two independent laboratories. In 2008, the monitoring was repeated with additional sites. Eighteen technical samplers were exposed at five sites with eight measuring points at distances from 5?m to 250?m from the maize field edges. Two honey-bee colonies for biological sampling were placed at one site for control purposes. PCR-analyses were performed to measure the amounts of Bt-maize pollen in the samples. Results The results of pollen monitoring at the Ruhlsdorfer Bruch revealed maize pollen exposure for all monitoring sites in both surveys. In 2007, up to 1.75 million maize pollen/m² were deposited at sites closest to the maize field. At 120?m from field edge in the middle of the FFH-reserve, 99,000 maize pollen/m² were detected. In 2008, similar results were found, at distances up to 250?m from the field edges deposition of 164,000 maize pollen/m² was detected. Data on maize pollen deposition show a clear distance relationship and are in accordance with results of further comprehensive surveys based on the same methodology (Hofmann 2007). The results of the microscopic analysis of the pollen pellets demonstrated that bees collected maize pollen at all sites, in 2007 and 2008. Although maize pollen is not the main food source (2007:0.1–0.3?%; 2008:2–3?%) the collection efficiency of the bee colonies resulted in high amounts of sampled maize pollen with 4 to 11 million per site in 2007 and up to 467 million in 2008. Molecular-biological analysis of maize pollen DNA by qPCR demonstrated that transgenic Bt-MON810 DNA was present in all technical and biological samples, corroborated by two independent laboratories. In 2007, the GMO-content in the samples ranged up to 44?% in the bioaerosols and 49?% in the pollen pellets. In 2008, GMO-proportions of up to 18?% were detected. Discussion The results of this study provide evidence that NTOs in the Ruhlsdorfer Bruch were exposed to Bt-maize pollen under the cultivation conditions in 2007 with a buffer zone of 100?m. The GMO-content reached up to 48?%. The results of the monitoring in 2008 confirmed these findings. Even though the exposure could be reduced by increasing the isolation distances to 250?m and 500?m respectively, the results still show percentages of up to 18?% Bt-MON810 in the pollen samples. The results on maize pollen deposition at the Ruhlsdorfer Bruch in 2007 and 2008 correspond to the results of an investigation which was conducted over several years applying the same standardised method, but covering a wider range of distances. The correlation between maize pollen deposition (n/m²) and distance to the source field (m) fitted best to a power function of the type y = 1.2086 · 10⁶ · x ^–0.548. Despite the same trend, the pollen deposition in the Ruhlsdorfer Bruch revealed above-average findings. Also the analysis of the pollen pellets collected by the bees showed an exposure in 2007 with values for the GMO-content of up to 49?%. For both methods, the exposure decreased in 2008 due to the greater buffer zones up to 500?m. Whereas the GMO-content for the biological sampling were reduced to values below 10?%, the values for the technical sampling were still higher indicating that greater buffer zones would be necessary for safety reasons under the precautionary principle. Conclusions The results of this investigation proved that maize pollen were dispersed by wind to distances farther than 250?m from field edge leading to maize pollen exposure in the centre of the nature reserve. The results also demonstrated that foraging NTOs living in the nature reserve were exposed to maize pollen from surrounding fields. Considering the cultivation of Bt-maize MON810, the assumption of the Environmental Risk Assessment (ERA) that there will be no relevant exposure beyond the Bt-maize fields, cannot be confirmed. Considering the results of this and related studies and with respect to the precautionary principle, one can state that buffer zones between Bt-maize fields and protected areas are an effective measure to minimise the exposure of Bt-maize pollen to NTOs and, thus, to prevent from adverse effects. Recommendations and perspectives Because of still insufficient ecotoxicological data for the risk assessment of Bt-maize MON810 considering butterflies and other protected NTOs, protection standards assuring the precautionary principle have to be implemented to avoid Bt-maize pollen exposure to NTOs. This applies for the case Ruhlsdorfer Bruch and for nature reserve areas in general. In order to exclude risks to protected NTOs occurring in nature reserves, sufficient buffer zones for Bt-maize cultivation should be considered. The statistical analysis revealed that distances of more than 500?m are necessary to decisively reduce exposure to foraging insects. In fact, distances of more than 1,000?m are necessary to prevent maize pollen deposition from values above 100,000 pollen/m² with a certainty of 90?%. An adequate risk assessment can only be attained if based on field measurements accounting for the high variation of pollen deposition due to local environmental site conditions and field management. The monitoring should be based on standardised methods. It should include locations with the highest expected deposition rates, the boundaries of the protected areas and sites of interest within those boundaries, e.?g., specific habitats of sensitive species.     

Beurteilung von Bodenkontaminationen mit Radioaktivität im Gebiet Hannover-List nach Maßstäben und Ansätzen der BBodSchV

Background, aim, and scope In the district List of Hanover (Lower Saxony) radioactive contaminations of the ground were detected at a site of a former chemical plant. Due to the lack of an ordinance regarding intervention regulations in the case of radioactive contaminations in Germany this situation had to be assessed on the basis of scales and methods of the German regulations concerning soil protection and contaminated sites. In particular it was necessary to develop methods and levels for the assessment of radioactive contaminations. Materials and methods Because radioactivity can be considered as a carcinogenic substance the methodical approaches of the BBodSchV for this group of substances were used in order to derive test thresholds for radioactive contaminations at children’s play areas, residential areas as well as parks and recreation facilities. Results For the assessment of radioactive soil contaminations with naturally occurring radionuclides at children’s play areas and residential areas the ingestion of soil is the decisive pathway of exposure. For children’s play areas a threshold level of 0.2?Bq/g for the sum U-238,max?+?Th-232,max was obtained. At areas with only impacts of ambient radiation from the contaminated ground test thresholds of 0.5?µSv/h are recommended. A special pathway is the migration of radon from the contaminated soil into basement floors of buildings. Taking into account the natural background levels of radon a concentration of 260?Bq/m³ is suggested as a test threshold in the framework of soil protection benchmarks. Discussion and conclusions will be described in Part 2 of the paper.     

Toxizität und Risk Assessment fluvialer Sedimente und Schwebstoffe: Eine kurze Übersicht bisheriger und neuerer Entwicklungen

Background In recent years, sediments have become a central topic of scientific and public discussion as an important factor for determining water quality. While the quality of surface waters in Germany has significantly improved during the past years, highly contaminated sediments still create a considerable threat to the quality of several European catchment areas. Main features Here, we summarize different concepts and methods for the assessment of sediment quality and report on some novel integrative test methods for assessing sediment toxicity including contaminant re-mobilization during simulated re-suspension events. Results and discussion Currently, different approaches for assessment of sediment pollution exist. While instrumental chemical analyses are not suitable to accurately describe sediment toxicity, combinations of biological and chemical test procedures and integrated approaches, for example weight-of-evidence studies and effect-directed analysis (EDA), have the potential to identify key contaminants. Inter-disciplinary studies combining hydrodynamic and toxicological aspects coupled to real exposure of aquatic organisms to contaminants are currently being developed. Conclusions Monitoring and assessment of sediment quality are of increasing importance, not only for national legislation but also for the implementation of the European Water Framework Directive (WFD). Integrated approaches for the determination of sediment stability play a key role in the appropriate sediment-monitoring strategies.     

Recycling glass-polishing sludge and aluminum anodising sludge in polyurethane and cement composites: fire performance and mechanical properties

Journal of Material Cycles and Waste Management - This article aims to study the mechanical strength and fire resistance of polyurethane/cement (PuCem) composites containing glass sludge and sludge...     

The interactive effects of conscientiousness,openness to experience,and political skill on job performance in complex jobs: The importance of context

Caveats concerning the ability of personality to predict job performance have been raised because of seemingly modest criterion‐related validity. The goal of the present research was to test whether narrowing the context via the type of job (i.e., jobs with complex task demands) and adding a social skill‐related moderator (i.e., political skill) would improve performance prediction. Further, along with political skill, the broad factor of personality demonstrated in prior research to have the strongest criterion validity (i.e., conscientiousness) was joined with a narrow construct closely related to openness to experience (i.e., learning approach) in a three‐way interactive prediction of supervisor‐rated task performance. With the employee–supervisor dyads among professionals, but not with the control group of non‐professional employees, task performance was predicted by the three‐way interaction, such that those high on all three received the highest performance ratings. Implications, strengths and limitations, and directions for future research are discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

A new basal galeomorph shark (Synechodontiformes, Neoselachii) from the Early Jurassic of Europe

Palaeospinacids are a group of basal galeomorph sharks and are placed in the order Synechodontiformes (Chondrichthyes, Neoselachii) ranging from the Permian to the Eocene. Currently, there is a controversy concerning the identity of diagnostic characters for distinguishing palaeospinacid genera because of very similar dental morphologies and the scarcity of articulated skeletal material. The most notable character for distinguishing species within the Palaeospinacidae is, however, the dental morphology. The main dental character uniting all palaeospinacids is the very specialised pseudopolyaulacorhize root vascularisation. A re-examination of articulated neoselachian skeletons from the Lower Jurassic of Lyme Regis (England) and Holzmaden (S Germany), and recently discovered specimens from the Upper Jurassic of the Solnhofen area and Nusplingen (S Germany) has yielded several hitherto unrecognised complete skeletons of the palaeospinacids Synechodus and Paraorthacodus enabling a re-evaluation of characters. These specimens indicate that the number of dorsal fins and the presence or absence of dorsal fin spines represent important features for identifying palaeospinacids. Synechodus bears two dorsal fins without fin spines, whereas Paraorthacodus only has a single dorsal fin lacking a fin spine directly in front of the caudal fin. All palaeospinacids from the Early Jurassic have two spines supporting the dorsal fins and are consequently assigned to a new genus, Palidiplospinax nov. gen. Three species are placed into the new taxon: Synechodus enniskilleni, S. occultidens and S. smithwoodwardi.     

Middle-Eocene artiodactyls from Shanghuang (Jiangsu Province,Coastal China) and the diversity of basal dichobunoids in Asia

A new assemblage of basal dichobunoid artiodactyls from the middle-Eocene Shanghuang fissure fillings includes the diacodexeid Jiangsudon shanghuangensis gen. and sp. nov., a new species of the lantianine dichobunoid Elaschitotherium, Elaschitotherium crepaturus sp. nov., and an indeterminate suoid which is presently the earliest record of this clade. Diacodexeids are also represented by two forms provisionally referred to cf. Diacodexis sp. and to an indeterminate Diacodexeidae, respectively. The occurrence of diacodexeids in Shanghuang contrasts with the early and earliest middle-Eocene chronological range of the family in Europe and North America and suggests that the stratigraphic range of the family in Asia extends up to the middle Eocene. This may reflect particular habitats in coastal China that may have been relatively stable during the early and middle Eocene, thus preserving forest-dwelling artiodactyls that became extinct in the other Holarctic regions. Compared to other supposedly coeval North American, European, and Asian faunas, the Shanghuang mammalian assemblage is most similar to early Uintan faunas of North America but is also remarkable in recording forms close to taxa that are characteristic of the Wasatchian and Bridgerian North American Land Mammal Ages. The Irdinmanhan age of the Shanghuang fauna is supported by the mammalian assemblage recovered from the fissure D, but an Arshantan age cannot be completely ruled out at this point. Although the Shanghuang assemblage is biased towards preservation of small components of the mammalian fauna, the Shanghuang fauna provide an important and unique window into the Eocene diversity and early evolution of cetartiodactyls in eastern Asia.     

Determination of specific activity of (226)Ra, (232)Th and (40)K for assessment of radiation hazards from Turkish pumice samples

The specific activity of (226)Ra, (232)Th and (40)K in 52 Turkish pumice samples collected from 11 geographical areas located in Central Anatolia, Eastern Anatolia, Mediterranean and Aegean regions was determined by gamma-ray spectrometry with a high-purity germanium (HPGe) detector. The specific activity of (226)Ra, (232)Th and (40)K ranged from 12.7+/-0.5 to 256.2+/-9.1Bqkg(-1) with a mean of 89.1+/-65.2Bqkg(-1), 12.3+/-1.0 to 237.9+/-12.2Bqkg(-1) with a mean of 87.0+/-61.4Bqkg(-1) and 300.1+/-5.5 to 1899.0+/-30.8Bqkg(-1) with a mean of 1211.9+/-419.8Bqkg(-1), respectively. Elemental concentrations were determined for U (from 1.0 to 20.7ppm with a mean of 7.2+/-5.3ppm), Th (from 3.0 to 58.6ppm with a mean of 21.4+/-15.1ppm) and K (from 1.0 to 6.1% with a mean of 3.9+/-1.3%). The radium equivalent activity (Ra(eq)), the activity index, the emanation coefficient, the (222)Rn mass exhalation rate, the indoor absorbed dose rate and the effective dose rate were estimated for the radiation hazard of the natural radioactivity in all samples. The calculated mean Ra(eq) value was 306.6+/-177.7Bqkg(-1) (54.6+/-5.5 to 737.6+/-49.0Bqkg(-1)) for all pumice samples. This value is lower than the recommended limit value of 370Bqkg(-1) for building raws and products. The emanation coefficient and the (222)Rn mass exhalation rate of all samples ranged from 29.4 to 42.9% with a mean of 36.2% and from 11.0 to 196.4muBqkg(-1)s(-1) with a mean of 73.5muBqkg(-1)s(-1), respectively. The mean indoor absorbed dose rate and the corresponding mean effective dose rate were 274.6+/-153.6nGyh(-1) (50.4-644.6nGyh(-1)) and 1.35+/-0.75mSvy(-1) (0.24-3.16mSvy(-1)), respectively. For all pumice samples the mean indoor absorbed dose rate is about three times higher than the population-weighted average of 84nGyh(-1), while the mean effective dose rate values except for PUM 05, PUM 06, PUM 10 and PUM 15 exceed the dose criterion of 1mSvy(-1).