Biological Control of Water Hyacinth Under Conditions of Maintenance Management: Can Herbicides and Insects Be Integrated?

Neochetina eichhorniae and N. bruchi. We therefore sampled water hyacinth and weevil populations at 54 sites distributed statewide. Half were under maintenance control, half were not treated with herbicides. General site conditions were assessed, demographic data were collected on weevil and plant populations, the reproductive condition of the weevils was determined, and plant nutrient and proximate composition of water hyacinth leaves were analyzed. Water hyacinth infestations under maintenance control were minimal when compared to unmanaged sites. Likewise, on a population basis, all weevil cohorts were much lower due to the paucity of plants. Plants at unmanaged sites, where weevil intensities were much higher, suffered high levels of stress and showed low growth potential. Lower percentages of the female weevils were reproductive at unmanaged sites when compared to managed sites, so densities of reproductives and immatures were similar at both site types. Reproductive status of the weevils improved with increased plant quality. Plant quality, in turn, declined as stresses arising from weevil feeding increased. Plant quality was positively correlated with plant growth potential and flower production. Thus, maintenance control improved plant nutritive quality thereby inducing reproductive vigor of the weevils, but ensuring plant regrowth and the need for future control. This suggests that biological and herbicidal controls should be integrated, using herbicides to maintain water hyacinth infestations below management thresholds but in a manner that conserves biological control agent populations. This approach would lead to improved plant nutritional quality that would, in turn, stimulate reproduction in biological control agent populations.     

Sperm storage reflects within- and extra-pair mating opportunities in a cooperatively breeding bird

In passerine birds, storage and maturation of sperm takes place in the cloacal protuberance (CP), an external swelling of the reproductive organ. The considerable variation in CP size among species is presumed to be a consequence of varying levels of sperm-competition, but whether individual variation in CP size within a species also reflects sperm competition is not well established. Here, we study temporal variation in male CP size in relation to within-pair and extra-pair mating opportunities and cuckoldry risk in purple-crowned fairy-wrens Malurus coronatus. This is a socially monogamous cooperatively breeding passerine that can breed year-round and has low levels of extra-pair paternity (in 6?% of broods). We show that male CP size sharply increased a few weeks before, and rapidly regressed after his partner laid eggs, consistent with a cost of its maintenance and/or sperm production. Surprisingly, despite low levels of extra-pair paternity, CP size of non-breeding and pre-breeding males was positively correlated with the number of breeding females in the population, suggesting that CP size is sensitive to extra-pair mating opportunities. However, CP sizes do not seem to reflect cuckoldry risk: CP size of dominant males was unaffected by the presence of a subordinate that was unrelated to the dominant female, although those subordinates occasionally sire offspring, and had a larger CP than subordinates living with their mother. Our results suggest that, even in a species with low levels of extra-pair paternity, individual investment in sperm storage reflects both within-pair and, albeit to lesser extent, extra-pair mating opportunities.     

Enhancing generic ecological model for short-term prediction of Southern North Sea algal dynamics with remote sensing images

Physically based numerical modelling follows from the basic understanding of the underlying mechanisms and is often represented by a set of (partial differential) equations. It is one of the main approaches in population dynamics modelling. The emphasis of the model introduced in this paper is on the simulation of short-term spatial and temporal dynamics of harmful algal bloom (HAB) events. Total suspended matter (TSM) concentration is one of the dominant factors for harmful algal bloom (HAB) prediction in North Sea. However, the modelling of suspended matter contains a high degree of uncertainty in this area. Therefore, this research aims to achieve a better estimation for the short-term prediction of harmful algal bloom development in both space and time by using spatially distributed TSM retrieved from remotely sensed images as physically based model inputs. In order to supply complete spatially covered datasets for the physically based model instrument: generic ecological model (GEM), this research retrieves TSM information from MERIS images by means of proper estimation techniques including biharmonic splines and self-learning cellular automata. A better estimation of HAB spatial pattern development is achieved by adding spatially distributed TSM data as inputs to original GEM model, and it proved that chlorophyll-a concentration in this area is very sensitive to TSM concentration.     

Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.     

Effect of thallium on phototactic behaviour in Daphnia magna

Environmental Science and Pollution Research - Thallium (Tl) is a trace metal enriched in wastewaters associated with mining and smelting of base metals. The toxicity of Tl to aquatic biota is...     

Morphological and molecular data suggest a cosmopolitan distribution of the polychaete <Emphasis Type="Italic">Proscoloplos cygnochaetus</Emphasis> Day, 1954 (Annelida,Orbiniidae)

The discovery of a possibly invasive Proscoloplos species on the French Atlantic coast led to a detailed morphological and molecular investigation. Proscoloplos consists of three nominal species, but molecular analyses of the variable ITS1 and ITS2 region revealed no clade support for samples from South Africa, France and Australia, representing at least two of these nominal species. We found no unambiguous diagnostic characters for the three different species even with scanning electron microscopy. Two main characters—first appearance of branchiae and hooks—that were used for species delineation show considerable intrapopulational variation and do not withstand critical evaluation. The obtained data and the observed regenerative capabilities point to a cautious use of the position of branchiae and hooked chaetae as taxonomic marker in Proscoloplos. After experimental bisection of animals, the recovery led to a phenotype without recognizable signs of regeneration, but neither branchiae nor hooked chaetae reoccurred at the same initial segmental position. Summarising the molecular and morphological data we suggest the synonymy of the known Proscoloplos species under the senior synonym Proscoloplos cygnochaetus Day, 1967. The enormous geographic range of this species comprises the temperate waters of the whole southern hemisphere and includes the French population. We discuss a dispersal enabled through the effective anchorage on vessels using mucous glands and chaetae possibly combined with architomic reproduction.     

Uncertainty propagation in vegetation distribution models based on ensemble classifiers

Ensemble learning techniques are increasingly applied for species and vegetation distribution modelling, often resulting in more accurate predictions. At the same time, uncertainty assessment of distribution models is gaining attention. In this study, Random Forests, an ensemble learning technique, is selected for vegetation distribution modelling based on environmental variables. The impact of two important sources of uncertainty, that is the uncertainty on spatial interpolation of environmental variables and the uncertainty on species clustering into vegetation types, is quantified based on sequential Gaussian simulation and pseudo-randomization tests, respectively. An empirical assessment of the uncertainty propagation to the distribution modelling results indicated a gradual decrease in performance with increasing input uncertainty. The test set error ranged from 30.83% to 52.63% and from 30.83% to 83.62%, when the uncertainty ranges on spatial interpolation and on vegetation clustering, respectively, were fully covered. Shannon’s entropy, which is proposed as a measure for uncertainty of ensemble predictions, revealed a similar increasing trend in prediction uncertainty. The implications of these results in an empirical distribution modelling framework are further discussed with respect to monitoring setup, spatial interpolation and species clustering.     

Genetic Engineering in Agriculture: Who Stands to Benefit?

The use of genetic engineering inagriculture has been the source of much debate. Todate, arguments have focused most strongly on thepotential human health risks, the flow of geneticmaterial to related species, and ecologicalconsequences. Little attention appears to have beengiven to a more fundamental concern, namely, who willbe the beneficiaries of this technology? Given the prevalence of chronic hunger and thestark economics of farming, it is arguable thatfarmers and the hungry should be the mainbeneficiaries of agricultural research. However, theapplication of genetic engineering appears unlikely tobenefit either of these two groups. This technology islargely controlled by the private sector, and itscontinued development hinges on its profitability.Thus, the only likely beneficiaries of the applicationof genetic engineering in agriculture are companieswith the capacity to use it.     

Handedness, Hand Roles, and Hand Injuries at Work

Hand injuries form a significant proportion of all workplace injuries. They are costly to treat, and lead to significant loss of time at work. This paper has two parts. First, there is a review of the literature that discusses prevalence of hand injury, and the significance of hand roles and handedness in industrial injuries. The second part represents an initial attempt to document the roles of the two hands in a particular industry, the metal manufacturing industry. The purpose of this survey of 30 different work stations in seven different industrial plants was to see whether there is a significant bias in terms of movement requirements for one or the other hand, leading to a possible differential risk of injury for the left and right hands. Overall, there was no clear bias favoring the right hand in activities assigned to the hands in seven different movement categories (MTM). However, the location of emergency controls favored the right hand unequivocally. The implications of biases favoring the left/right hand for safety of machine operation are discussed in the light of current findings on left/right hand performance in right- and lefthanders.     

Environmental and production consequences of using alum-amended poultry litter as a nutrient source for corn

Field trials were established to compare alum-treated poultry litter (ATPL), normal poultry litter (NPL), and triple superphosphate (TSP) as fertilizer sources for corn (Zea mays L.) when applied at rates based on current litter management strategies in Virginia. Trials were established in the Costal Plain and Piedmont physiographic regions near Painter and Orange, VA, respectively. Nitrogen-based applications of ATPL or NPL applied at rates estimated to supply 173 kg of plant-available nitrogen (PAN) ha(-1) resulted in significantly lower grain yields than treatments receiving commercial fertilizer at the same rate in 2000 and 2001 at Painter. These decreases in grain yield at the N-based application rates were attributed to inadequate N availability, resulting from overestimates of PAN as demonstrated by tissue N concentrations. However, at Orange no treatment effects on grain yield were observed. Applications of ATPL did not affect Al concentrations in corn ear-leaves at either location. Exchangeable soil Al concentrations were most elevated in treatments receiving only NH4NO3 as an N source. At N-based application rates, the ATPL resulted in lower Mehlich 1-extractable P (M1-P) and water-extractable soil phosphorus (H2O-P) concentrations compared to the application of NPL. A portion of this reduction could be attributed to lower rates of P applied in the N-based ATPL treatments. Runoff collected from treatments which received ATPL 2 d before conducting rainfall simulations contained 61 to 71% less dissolved reactive phosphorus (DRP) than treatments receiving NPL. These results show that ATPL may be used as a nutrient source for corn production without significant management alterations. Alum-treated poultry litter can also reduce the environmental impact of litter applications, primarily through minimizing the P status of soils receiving long-term applications of litter and reductions in runoff DRP losses shortly after application.