Honeybees (<Emphasis Type="Italic">Apis mellifera</Emphasis>) as a biological barrier for contamination of honey by environmental toxic metals

The aim of the study was to investigate the transfer of toxic metals from honeybee workers (Apis mellifera L.) to bee honey in relation to the ecological state of the environment. The materials of the study consisted of samples of honeybee bodies and varietal honeys taken from the same apiary located in three areas: R1—urbanized (16), R2—ecologically clean (16) and R3—industrialized (15) of south-eastern Poland. The contents of 14 elements in all tested samples, including toxic metals (Cd, Pb, Hg, Al, Ni, Tl) as well as bioelements (K, Mg, Ca, Mn, Fe, Zn, Cu, Se), were analysed by the ICP-OES method with prior microwave mineralization. The concentrations of the majority of the studied elements, excluding aluminum and lead, were significantly higher in bee bodies than in honey samples (P?<?0.05). The pollution of bee bodies by toxic metals was dependent on the environmental cleanliness, and the most pollution was observed in the industrialized area. The bee body was the most effective barrier for Cd and Tl transfer to the honey, while the level of Ni was similar in both tested materials. The Al concentration was significantly higher in honey than bee bodies (14.81?±?24.69 and 6.51?±?5.83 mg kg^?1, respectively), which suggests the possibility of secondary contamination of honey. The greatest sensitivity to heavy metal pollution was observed in honeydew honey compared to nectar honeys (P?<?0.05). It was proved for the first time that bees work as biofilters for toxic metals and prevent honey contamination.     

Estimation of the environmental risk posed by landfills using chemical, microbiological and ecotoxicological testing of leachates

The leachates from 22 municipal solid waste (MSW) landfill sites in Southern Poland were characterized by evaluation of chemical, microbiological and ecotoxicological parameters. Chemical analyses were mainly focused on the identification of the priority hazardous substances according to Directive on Priority Substances, 2008/105/EC (a daughter directive of the WFD) in leachates. As showed, only five substances (Cd, Hg, hexachlorobutadiene, pentachlorobenzene and PAHs) were detected in the leachates. The compounds tested were absent or present at very low concentrations. Among them, only PAHs were found in all samples in the range from 0.057 to 77.2 μg L⁻¹. The leachates were contaminated with bacteria, including aerobic, psychrophilic and mesophilic bacteria, coliform and fecal coliforms, and spore-forming-bacteria, including Clostridium perfringens, and with filamentous fungi. From the analysis of specific microorganism groups (indicators of environmental pollution by pathogenic or opportunistic pathogenic organisms) it can be concluded that the landfill leachates showed sanitary and epidemiological hazard. In the ecotoxicological study, a battery of tests comprised of 5 bioassays, i.e. Microtox®, Spirotox, Rotoxkit F™, Thamnotoxkit F™ and Daphtoxkit F™ magna was applied. The leachate samples were classified as toxic in 13.6%, highly toxic in 54.6% and very highly toxic in 31.8%. The Spirotox test was the most sensitive bioassay used. The percentage of class weight score was very high - above 60%; these samples could definitely be considered seriously hazardous and acutely toxic to the fauna and microflora.No correlations were found between the toxicity values and chemical parameters. The toxicity of leachate samples cannot be explained by low levels of the priority pollutants. It seems that other kinds of xenobiotics present in the samples at subacute levels gave the high aggregate toxic effect.The chemical, ecotoxicological and microbiological parameters of the landfill leachates should be analyzed together to assess the environmental risk posed by landfill emissions.     

Nickel induced alteration of hen body weight,egg production and egg quality after an experimental peroral administration

In this study the effects of nickel (NiCl₂) administered in drinking water (0.02; 0.2 and 2.0 mg NiCl₂/L for 28 days) on laying hen body weight, egg production and egg quality is reported. Growth parameters during the experiment were significantly decreased mainly in the group with the highest nickel concentration. In total egg production dose–dependent decrease in all experimental groups was found. Egg weight was mainly affected in the group with the highest nickel concentration. Specific egg weight was not altered. Albumen weight and albumen content was significantly decreased in groups with the highest nickel concentration in comparison with the control group.

Egg yolk analysis detected significantly decreased yolk weight in the group with the highest nickel experimental level. In yolk color a significant difference was detected between the group receiving 0.02 and 0.2 mg NiCl₂/mL. Eggshell compactness was increased in all experimental groups what could be induced by altered mineralization of eggshell. Results of this study clearly report a negative effect of nickel as an environmental pollutant on laying hen body weight, egg production as well as egg quality.     

两维缺陷分析:用于保护规划和实施生物多样性政策的有效手段

在景观水平的管理中,为了保护具有代表性和连接成片的生境网络,以达到维持生物多样性的目的,就必须在不同规模上将保护、经营和生境恢复等几项工作有机结合.我们认为将自然和社会科学融为一体的两维缺陷分析方法是实施生物多样性政策的有效工具.这个工具把与生物相关的"水平"生态学问题与"垂直"的制度体制和其它社会问题有机结合考虑.以森林生物多样性为例,本文将演示如何将与生物多样性保护有关的生态学和制度等方面的问题综合考虑,从而促进整个区域发展的环境可持续性.尤其,我们用区域性缺陷分析方法,即先确定对"绿色基础设施"起功能性连接作用的重点森林类型和生境模型,以此作为工具进行"水平"缺陷分析.就"垂直"范围而论,通过鉴别政策实施中的体制性障碍我们指出社会科学如何用于在实际景观范围内评估生物多样性政策实施是否成功.研究表明,多学科间的合作方法能应用于其它各类环境,包括其它陆生生物和水生生态系统,在这些生态系统中,重要栖息地的连接性、对栖息地丧失的非线性响应,以及社会和经济问题在同一景观内交织在一起.     

Assessing village authenticity with satellite images: a method to identify intact cultural landscapes in Europe

The village with its characteristic zones of different land use from the center to the periphery is a basic unit of Europe's cultural landscapes. However, loss of the authentic pre-industrial village structure characterized by a fine-grained structure of arable land and wooded grasslands is a threat to both cultural heritage and biodiversity in many rural landscapes. Therefore, it is important that the extent and rate of change of such authentic villages in a landscape can be monitored. We studied to what extent loss of authenticity with increasing time after abandonment can be assessed by quantitative analysis and visual interpretation of satellite images. The study was carried out in the Bieszczady Mountains, SE Poland in 1999. Using Landsat Thematic Mapper data from 1998, both the grain size of landscape elements (size of fields) and land-cover composition (encroachment of shrub and forest) were quantitatively described 6 type villages representing different stages of deterioration of the authentic village structure. Historical maps were used to delineate the border of the villages and the former extension of forest and open land was measured. The present land use and the degree of abandonment expressed as grain size and forest encroachment were mapped using satellite data. Deterioration occurred along 2 transformation paths: abandonment and ultimately becoming forest, or intensified agriculture, respectively. To validate these results we classified 22 other villages in a 1000 km2 area by visual interpretation of the original satellite images into 1 of 4 types. We then collected historical data on human population changes over the past six decades. The classification of village authenticity was clearly related to the rate of human population decline. We address the importance of validating and applying this approach for rapid assessment of the authenticity of cultural landscapes in European regions being subject to ongoing as well as expected future change, related to expansion of the European Union. Finally, we argue that the village represents a scale at which integration of natural and social sciences is possible.     

The toxicity of tri-substituted benzenes to the protozoan ciliate Spirostomum ambiguum

The Spirotox test utilises a large ciliate protozoan Spirostomum ambiguum as a test organism. The goal of the present study was to evaluate the toxicity of tri-substituted benzenes in the Spirotox test. Twenty-six organic compounds were tested in this study and included: dimethylphenols (DMPs), dichlorophenols (DCMs), trichlorobenzenes (TCBs), dichloroanilines (DCAs), dinitrophenols (DNPs), dinitroaniline (DNA), dinitrochlorobenzene (DNCB) and dinitrofluorobenzene (DNFB). The toxicity of the compounds tested varied almost four orders of a magnitude. DMPs and DCAs were the least toxic, whereas dinitro derivatives were the most toxic to S. ambiguum. When chlorine or fluorine atoms were replaced by amino or hydroxy substituents, the toxicity increased dramatically. The results of the Spirotox test were compared with three other bioassays that are widely used around the world: Microtox, Tetrahymena pyriformis and Daphnia magna. The Spirotox was less sensitive than these other bioassays for the majority of these compounds, with an exception found for the dinitro derivatives.     

Spatial and temporal distribution of illegal dumping sites in the nature protected area: the Ojców National Park,Poland

The existence of illegal dumping continues to be a worldwide problem, even in nature protected areas, and its distribution is not random. An understanding of the distribution of illegal dumping sites is crucial for the enhancement of effective waste management systems. Therefore, this study aims at a better understanding of spatial and temporal changes to illegal dumping sites in a nature protected area (the Ojców National Park) from 1994 to 2016. The most important spatial factors that control the distribution of illegal dumping sites were the distance from roads and from the field-forest edge. In the last two decades, the number of small dumping sites has increased, whereas the number of large illegal dumping sites has decreased. Moreover, this study presents a model of the potential occurrence of illegal dumping sites, which indicates places that should be under the control of the national park and of local authorities.     

Submicron particle-bound polycyclic aromatic hydrocarbons in the Polish teaching rooms: Concentrations, origin and health hazard

The goal of the work was to investigate the concentrations of the 16 US EPA priority polycyclic aromatic hydrocarbons(PAH) bound to submicrometer particles(particulate matter, PM_1) suspended in the air of university teaching rooms and in the atmospheric air outside. Two teaching rooms were selected in two Polish cities, Gliwice, southern Poland,and Warsaw, central Poland, differing with regard to the ambient concentrations and major sources of PM and PAH. The variabilities of indoor and outdoor 24-hr concentrations of PM_1-bound PAH, the ratio(I/O) of the indoor to outdoor 24-hr concentrations of PM_1-bound PAH, probable sources of PAH and the level of the hazard from the mixture of the 16 PAH(ΣPAH) to humans at both sites were analyzed. In both Warsaw and Gliwice, the mean concentrations of PM_1-bound ΣPAH were slightly higher in the atmospheric air than in the rooms. The indoor and outdoor concentrations of individual PAH in Gliwice were correlated,in Warsaw – they were not. Most probably, the lack of the correlations in Warsaw was due to the existence of an unidentified indoor source of gaseous PAH enriching PM_1 in phenanthrene, fluorene, and pyrene. Although the ambient concentrations of PM_1-bound PAH were low compared to the ones observed earlier at both sites, they were much higher than in other urbanized European areas. However, because of low mass share of heavy PAH in ΣPAH, the various indicators of the health hazard from the 16 PAH mixture were low compared to other regions.     

Removal of toxic metal ions from landfill leachate by complementary sorption and transport across polymer inclusion membranes

In this study, performance of a lab-scale two-step treatment system was evaluated for removal of toxic metal ions from landfill leachate. The technology of polymer inclusion membranes (PIMs) was the first step, while the second step of the treatment system was based on sorption on impregnated resin. The PIMs were synthesized from cellulose triacetate as a support, macrocyclic compound i.e. alkyl derivative of resorcinarene as a ionic carrier and o-nitrophenyl pentyl ether as a plasticizer. The transport experiments through PIM were carried out in a permeation cell, in which the membrane film was tightly clamped between two cell compartments. The sorption tests were carried out using a column filled with a resin impregnated with resorcinarene derivative. The obtained results show the good performance with respect to the removal of heavy metals from landfill leachate with the overall removal efficiency of 99%, 88% and 55% for Pb(II), Cd(II) and Zn(II) ions, respectively. Moreover the contents of metal ions in the leachate sample after treatment system were below permissible limit for wastewater according to the Polish Standards.     

Development of a waterjet system for direct delivery of granular iron and activated carbon to remediate contaminated aqueous sediments

While the techniques and technologies associated with contaminated sediment remediation are relatively mature, there are several issues associated with these practices that make them unattractive. The inability of currently used mechanical mixing implements to place amendments in aqueous environments and their intrusive behavior toward benthic communities are just two examples of a necessity for an improved delivery method. Waterjets may be a viable option for placement of particulate remediation amendments, such as activated carbon and granular iron, at depth. A custom waterjet nozzle and injection system has been fabricated by the authors to examine this delivery concept. The developed injection system's performance was tested by characterizing the waterjet‐delivered amendment (activated carbon and granular iron) distributions in a surrogate sediment. The delivered amendment distributions followed similar patterns for a range of injection times and a variety of amendments. The injection depths, however, were dependent upon the type of amendment being injected. These findings have led to a better understanding of what occurs during an amendment injection, which can be used for a more controlled placement of remediation amendments using this technique in the future. The laboratory results indicate that the subject waterjet system may have the potential for field‐scale applications, especially for granular iron delivery, as the authors were able to place between 60 and 70 wt percent into a surrogate sediment bed along the path of injection. © 2011 Wiley Periodicals, Inc.