等离子体固态可燃物液化反应动力学分析

本文利用介质阻挡放电等离子体技术,对以煤和生物质为代表的固态可燃物液化反应机理进行研究,以期探索能源利用新途径.借助碰撞理论和Boltzman方程,对高能电子碰撞引发多种离解反应的速率常数进行数值模拟,计算结果和实验曲线对比,证明模型具有一定的适用性和可靠性.在一定的电子温度下,通过不同离解反应速率常数的对比,可以判断...     

基于对应分析法的废弃金属尾矿库重金属污染原位监测点优化研究

重金属污染物原位监测是对废弃金属尾矿库重金属污染治理的基础,由于缺乏基础监测数据,基础数据采集工作量巨大.采用对应分析法建立某尾矿库的土壤样本和污染物之间的联系,以达到优化监测点和监测因子的目的.将监测点和监测因子反映到同一因子轴的图形上,能清晰直观地表述监测点和污染物间的内在联系和分布特征;确定主监测点和主监测指标,...     

Air quality assessment by tree bark biomonitoring in urban, industrial and rural environments of the Rhine Valley: PCDD/Fs, PCBs and trace metal evidence

Tree barks were used as biomonitors to evaluate past atmospheric pollution within and around the industrial zones of Strasbourg (France) and Kehl (Germany) in the Rhine Valley. The here estimated residence time for trace metals, PCBs and PCDD/Fs in tree bark is >10 years. Thus, all pollution observed by tree bark biomonitoring can be older than 10 years. The PCB baseline concentration (sum of seven PCB indicators (Σ₇PCB_ind)) determined on tree barks from a remote area in the Vosges mountains is 4 ng g⁻¹ and corresponds to 0.36 × 10⁻³ ng toxic equivalent (TEQ) g⁻¹ for the dioxin-like PCBs (DL-PCBs). The northern Rhine harbor suffered especially from steel plant, waste incinerator and thermal power plant emissions. The polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) concentrations analyzed in tree barks from this industrial area range between 392 and 1420 ng kg⁻¹ dry-weight (dw) corresponding to 3.9 ng TEQ_PCDD/Fs kg⁻¹ to 17.8 ng TEQ_PCDD/Fs kg⁻¹, respectively. Highest PCDD/F values of 7.2 ng TEQ kg⁻¹ to 17.8 ng TEQ kg⁻¹ have been observed close to and at a distance of <2 km southwest of the chemical waste incinerator. However, very close to this incinerator lowest TEQ dioxin-like PCB (TEQ_DL-PCB) values of 0.006 ng TEQ g⁻¹ have been found. On the other hand close to and southwest and northeast of the steel plant the values are comparatively higher and range between 0.011 ng TEQ g⁻¹ and 0.026 ng TEQ g⁻¹. However, even stronger Σ₇PCB_ind enrichments have been observed at a few places in the city center of Kehl, where ΣDL-PCB values of up to 0.11 ng TEQ g⁻¹ have been detected. These enrichments, however, are the result of ancient pollutions since recent long-term measurements at the same sites indicate that the atmospheric PCB concentrations are close to baseline. Emissions from an old landfill of waste and/or great fires might have been the reasons of these PCB enrichments. Other urban environments of the cities of Kehl and Strasbourg show significantly lower Σ₇PCB_ind concentrations. They suffer especially from road and river traffic and have typically Σ₇PCB_ind concentrations ranging from 11 ng g⁻¹ to 29 ng g⁻¹. The PCB concentration of 29 ng g⁻¹ has been found in tree bark close to the railway station of Strasbourg. Nevertheless, the corresponding TEQ_DL-PCB are low and range between 0.2 × 10⁻³ ng TEQ g⁻¹ and 7 × 10⁻³ ng TEQ g⁻¹. Samples collected near road traffic are enriched in Fe, Sb, Sn and Pb. Cd enrichments were found close to almost all types of industries. Rural environments not far from industrial sites suffered from organic and inorganic pollution. In this case, TEQ_DL-PCB values may reach up to 58 × 10⁻³ ng TEQ g⁻¹ and the corresponding V, Cr, Co, Ni, and Cd concentrations are comparatively high.     

Factors affecting simultaneous nitrification and denitrification in an SBBR treating domestic wastewater

An aerobic sequencing batch biofilm reactor (SBBR) packed with Bauer rings was used to treat real domestic wastewater for simultaneous nitrification and denitrification. The SBBR is advantageous for creating an anoxic condition, and the biofilm can absorb and store carbon for good nitrification and denitrification. An average concentration of oxygen ranging from 0.8 to 4.0 mg/L was proved very efficient for nitrification and denitrification. Volumetric loads of TN dropped dramatically and effluent TN concentration increased quickly when the concentration of average dissolved oxygen was more than 4.0 mg/L. The efficiency of simultaneous nitrification and denitrification (SND) increased with increasing thickness of the biofilm. The influent concentration hardly affected the TN removal efficiency, but the effluent TN increased with increasing influent concentration. It is suggested that a subsequence for denitrification be added or influent amount be decreased to meet effluent quality requirements. At optimum operating parameters, the TN removal efficiency of 74%–82% could be achieved.     

Weak indirect effects inherent to nitrogen biogeochemical cycling within anthropogenic ecosystems: A network environ analysis

Indirect effects are assumed to be the major causes of the complexity and stability of ecological networks. The complexity of urban-rural complexes (URCs) could also be attributed to the indirect effects associated with human activities. No studies, however, have quantified the strength of indirect effects in relation to urban biogeochemistry. A network environ analysis (NEA) was used for this study to investigate and compare indirect effects in relation to the nitrogen (N) cycling networks of 22 natural ecosystems and five URCs. Results show that indirect effects were proven to be weak for URC N cycling networks (accounting for only ∼2% of the overall effects measured in natural ecosystems). The weak indirect effects found provide a counterexample for the hypothesis that indirect effects are in fact the dominant components of biogeochemical networks. It also implies that human activity in itself does not always raise the complexity of ecological processes as previously suggested. Weak indirect effects also lead to perturbation fragility for URC N cycles (where the decay rate is greater in comparison to natural ecosystems by a factor of 13). In order to improve the robustness and efficiency of URC biogeochemical cycling, a knockout analysis was carried out. By comparing results after removing single interactions between natural ecosystems and URCs it was found that the loss of indirect effects require cooperative strategies to optimize N cycling networks within URCs.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.     

嘉定城区河流水质现状评价及污染防治对策

通过对嘉定中心城区河流的水质现状调查和评价，提出了引清排污、加强市政措施等污染防治对策。     

PHBV表面疏水改性用作吸油材料的研究

利用多种表面改性剂对生物可降解材料PHBV进行了表面改性实验研究，测定了不同改性剂改性后PHBV的吸油率以及温度对其吸油效果的影响，并探讨了改性机理，研究结果表明：不同改性剂对PHBV的改性效果有所差异，从疏水和吸油的共同效果来看，最佳疏水改性剂为添加量5％时的硅油，温度对未改性PHBV和改性PHBV的吸油率及吸油速度均有影响。     

发光细菌对化合物的致突效应与检测研究

从明亮发光杆菌Ｔ３小种分离到的自发暗变种（Ｋ变种）Ｔ９１７１菌种对三种化合物呈致空变阳性反应，对二种化合物呈可疑阳性，发光细菌暗变种对遗传毒性化合物致突效应的灵敏度高于Ａｍｅｓ试验和浦乳动物致癌试验，可望成为一种简易灵敏的测试环境致突变物的短期生物学试验方法。