Study of the organic matter evolution during municipal solid waste composting aimed at identifying suitable parameters for the evaluation of compost maturity

In this work the composting process of municipal solid wastes was studied in order to characterize the transformations of organic matter, particularly humic acid (HA). A composting process, lasting three months, was monitored by chemical methods; the following parameters were measured: water-soluble carbon concentration (WSC) and humic substances content (humic and fulvic acid (FA)). The effects of humification on the molecular structure of humic acid (HA) were also evaluated by Fourier transform infrared (FT-IR) and (13)C NMR spectroscopy. WSC concentration rapidly increased reaching a maximum at day-14 of the composting process and then declined. The humic and fulvic acid content (HA and FA, respectively) slightly increased during the process. The FT-IR and (13)C NMR spectra of HA indicate a high rate of change in structure during composting. The groups containing aromatic and carboxylic C increased, while polysaccharides and other aliphatic structures degraded during composting, resulting in HA structures of higher aromaticity. Therefore, spectrometric measurements could provide information significantly correlated to conventional chemical parameters of compost maturity.     

Formation of bound residues by naphthalene and cis-naphthalene-1,2-dihydrodiol

The formation of bound residues by naphthalene and its metabolite, cis-naphthalene-1,2-dihydrodiol, in a sediment (1% OC), a silty loam soil (2.9% OC) and a peat (26% OC) was examined. The experiments were carried out under both sterile and nonsterile conditions for up to 35 days. The samples containing bound contaminant were hydrolyzed at an alkaline pH and fractionated using 3,000 and 500 Da molecular weight cutoff ultrafiltration membranes in series. The results for all the geosorbents examined showed that bound residue formation is low for naphthalene and between 5 and 20 times higher for the metabolite. The amount of bound residues released by hydrolysis was higher for the metabolite than for the parent compound for all the samples. The molecular weight distribution of bound radioactivity after hydrolysis showed binding to the high molecular weight components of the sediment organic matter and to the low molecular weight components for soil and peat organic matter when incubated with cis-naphthalene-1,2-dihydrodiol. Experiments performed with naphthalene-UL-(14)C showed larger amounts of bound residue found than in experiments with naphthalene-1-(14)C.     

Solar radiation synthetic series for power purchase agreements

The present paper proposes a methodology based on the implementation and assessment of autoregressive (AR) solar radiation models for generating synthetic series and providing guidance on bidding strategies for power purchase agreements. The work considered conventional and periodic AR models with different lag orders, assessing the models against real solar radiation measurements. The synthetic series generation process developed 1000 1-year monthly solar radiation scenarios that were later employed for simulating electric energy production and power purchase agreement models. This application allowed one to evaluate the risk associated with the energy supply security, supporting bidding strategies in energy auctions. A real study case is also illustrated in detail, referring to a spot in the Brazilian best irradiance area.

     

The contribution of non‐timber forest products towards sustainable rural development: The case of Candelilla wax from the Chihuahuan Desert in Mexico

The promotion of development projects based on the commercialization of non‐timber forest products has increased in recent decades, showing a positive contribution to rural development; yet it has led to controversial approaches in resource preservation. This paper examines the case of Candelilla wax from the Chihuahuan Desert in northern Mexico, identifying its potential contribution to poverty alleviation in marginal areas, and its unique opportunity to access potential markets of a wide variety of industries all around the world. In this paper, the authors base their analysis on three main aspects: social, economic and environmental. Potential benefits that could be obtained from the collaboration of private institutions, development organizations, policymakers and rural producers through integrated rural development projects are featured.     

Efficient Transmission of an Introduced Pathogen Via an Ancient Insect-Fungus Association

 In Cupressus sempervirens the association between seed insects and tree pathogens has resulted in optimal exploitation of the cones. A fungus-infected cone can be inhabited by the nymphs of a true seed bug (Orsillus maculatus), the adults of which may carry a heavy spore load at emergence. Cones are infected when eggs are laid within the cone, most frequently via the emergence holes of a seed wasp (Megastigmus wachtli). This symbiotic association evolved with the nonaggressive fungus Pestalotiopsis funerea within the natural range of the cypress. When the aggressive cypress canker disease (Seiridium cardinale) was introduced into Europe, it was transmitted by O. maculatus to cones usually colonized by Pestalotiopsis funerea, with disastrous consequences for the regeneration and survival of C. sempervirens in the entire Mediterranean area. Received: 30 November 1998 / Accepted in revised form: 17 May 1999     

Integration studies on a two-stage fermentation process for the production of biohydrogen

Fermentation of biomass residues and second generation biomasses is potentially a way to enable a sustainable production of hydrogen. Simulation models which calculate mass and energy balances, developed with Aspen Plus^®, are used to integrate the process steps necessary to produce pure hydrogen from biomass in a 2-stage fermentation process. Process and heat integration are introduced to reduce the high water and heat demand of the process, connected to the low substrate concentrations in the involved process streams. The results show that the recirculation of process effluents, together with the use of properly designed heat exchangers, can reduce the water and heat demand up to 90% from a non-integrated process, but is also subject to restrictions due to an increase in osmolality in the system.     

Dramatic effect of pop-up satellite tags on eel swimming

The journey of the European eel to the spawning area in the Sargasso Sea is still a mystery. Several trials have been carried out to follow migrating eels with pop-up satellite tags (PSATs), without much success. As eels are very efficient swimmers, tags likely interfere with their high swimming efficiency. Here we report a more than twofold increase in swimming cost caused by a regular small satellite tag. The impact was determined at a range of swimming speeds with and without tag in a 2-m swimming tunnel. These results help to explain why the previous use of PSATs to identify spawning sites in the Sargasso Sea was thus far unsuccessful.     

Blood lead levels and nutrition in an urban community in Venezuela

Previous lead (Pb) exposure studies identified the Michelena sector in Valencia as a ‘critical’ area for Pb contamination. An analytical-ecological study was designed to evaluate the association of environmental and nutritional variables with blood lead (BPb) in children attending two schools located in this sector. A questionnaire was administered and the findings were correlated with BPb and serum-calcium (S-Ca) levels. The total population examined included 60 children (4–9 years old). The mean BPb values was 10.5?±?3?ug/dL (61.7%?≥?10?ug/dL) and the mean S-Ca was 8.9?±?0.7?mg/dL. A significant difference (p?=?0.042) was found between BPbs in males (11.1?±?3.1?ug/dL) when compared with females (9.6?±?2.8?ug/dL). Child age, school, schedule at school, parents' occupational exposure, habits, and socioeconomic status had no significant association with BPbs. The relationship between BPb levels (dependent variable) and the S-Ca and daily Ca intake levels (independent variables) was analysed through multiple regression analysis. The results show an inverse relationship between BPb and both variables (β?=??0.073, and β?=??0.001) respectively, with the daily Ca intake being the only significant variable in the model (p?=?0.04). Although average BPbs was not very high, the percentage of children with BPbs higher than the US-CDC intervention level was greater than those found in other studies. Since detailed information is generally unavailable for these children in Venezuela, this study provides insights for future research.     

Mechanisms of moisture stress in a mid-latitude temperate forest: Implications for feedforward and feedback controls from an irrigation experiment

While it is well established that stomata close during moisture stress, strong correlations among environmental (e.g., vapor pressure deficit, soil moisture, air temperature, radiation) and internal (e.g., leaf water potential, sap flow, root-shoot signaling) variables obscure the identification of causal mechanisms from field experiments. Models of stomatal control fitted to field data therefore suffer from ambiguous parameter identification, with multiple acceptable (i.e., nearly optimal) model structures emphasizing different moisture status indicators and different processes. In an effort to minimize these correlations and improve parameter and process identification, we conducted an irrigation experiment on red maples (Acer rubrum L.) at Harvard Forest (summers of 2005 and 2006). Control and irrigated trees experienced similar radiative and boundary layer forcings, but different soil moisture status, and thus presumably different diurnal cycles of internal leaf water potential. Measured soil moisture and atmospheric forcing were used to drive a transient tree hydraulic model that incorporated a Jarvis-type leaf conductance in a Penman–Monteith framework with a Cowan-type (resistance and capacitance) tree hydraulic representation. The leaf conductance model included dependence on both leaf matric potential, Ψ_L (so-called feedback control) and on vapor pressure deficit, D (so-called feedforward control). Model parameters were estimated by minimizing the error between predicted and measured sap flow. The whole-tree irrigation treatment had the effect of elevating measured transpiration during summer dry-downs, demonstrating the limiting effect that subsurface resistance may have on transpiration during these times of moisture stress. From the best fitted model, we infer that during dry downs, moisture stress manifests itself in an increase of soil resistance with a resulting decrease in Ψ_L, leading to both feedforward and feedback controls in the control trees, but only feedforward control for the irrigated set. Increases in the sum-of-squares error when individual model components were disabled allow us to reject the following three null hypotheses: (1) the f(D) stress is statistically insignificant (p = 0.01); (2) the f(Ψ_L) stress is statistically insignificant (p = 0.07); and (3) plant storage capacitance is independent of moisture status (p = 0.07).     

Effect of heating rate on the pyrolysis of high-impact polystyrene containing brominated flame retardants: fate of brominated flame retardants

In the case of plastics containing brominated flame retardants, various brominated organic compounds, including polybrominated dibenzodioxins and dibenzofurans, are yielded when they are degraded. In order to reduce the hazard that might be generated during after-live treatment, the behaviour of flame retarded high-impact polystyrene containing decabromo diphenylether and antimony oxide (Sb₂O₃), was investigated using several heating programs. It was found that the separation of the thermal process into two steps divided at 330?°C makes it possible to obtain an oil fraction rich in brominated compounds at low temperatures and an oil fraction depleted in brominated compounds at high temperatures. The low temperature oil contained a high concentration of SbBr₃ and dibromodibenzofurans. Various brominated compounds with a low volatility and 1-bromo-1-phenylethane from the reaction of HBr with styrene were among the substances in the high temperature oil. The concentration of brominated compounds was reduced from 6?wt% for degradation in a single step to below 1?wt% in the high temperature oil in the two step process.