Report: waste refinery in the municipality of Bor?s.

This paper briefly describes waste treatment trends in Sweden and describes an example of state-of-the-art treatment in a local integrated waste treatment system (Bor?s). The focus is on treatment of household waste, to illustrate what can be done to establish a sustainable waste treatment system with high recovery of materials and energy. The various processes have resulted in a low amount of landfilled household waste, and high proportions of recovered energy and materials. Heat, electricity, vehicle fuel and fertilizers, metals and construction materials are recovered from the local waste in Bor?s, with less than 4% of domestic waste being sent to landfill.     

Aluminium recovery vs. hydrogen production as resource recovery options for fine MSWI bottom ash fraction

Waste incineration bottom ash fine fraction contains a significant amount of aluminium, but previous works have shown that current recovery options based on standard on-step Eddy Current Separation (ECS) have limited efficiency. In this paper, we evaluated the improvement in the efficiency of ECS by using an additional step of crushing and sieving. The efficiency of metallic Al recovery was quantified by measuring hydrogen gas production. The ash samples were also tested for total aluminium content with X-ray fluorescence spectroscopy (XRF). As an alternative to material recovery, we also investigated the possibility to convert residual metallic Al into useful energy, promoting H₂ gas production by reacting metallic Al with water at high pH. The results show that the total aluminium concentration in the <4 mm bottom ash fraction is on average 8% of the weight of the dry ash, with less than 15% of it being present in the metallic form. Of this latter, only 21% can be potentially recovered with ECS combined with crushing and sieving stages and subsequently recycled. For hydrogen production, using 10 M NaOH at 1 L/S ratio results in the release of 6–11 l of H₂ gas for each kilogram of fine dry ash, equivalent to an energy potential of 118 kJ.     

The role of the amphipod <Emphasis Type="Italic">Gammarus locusta</Emphasis> as a grazer on macroalgae in Swedish seagrass meadows

Mesograzers are thought to play a critical role in seagrass beds by preventing overgrowth of ephemeral algae. On the Swedish west coast, eelgrass Zostera marina has decreased in recent decades as a result of eutrophication and increased growth of macroalgal mats (mainly filamentous Ulva spp. and Ectocarpales), with no indication of grazer control of the algae. The aim of this study was to investigate the ability of the amphipod Gammarus locusta to control algal blooms during nutrient-enriched and ambient conditions, using a combination of laboratory, field and model studies. Laboratory experiments demonstrated that juvenile and adult G. locusta could consume both Ulva spp. and Ectocarpales, but that consumption of Ulva spp. was significantly higher. Cannibalism was common in individual treatments involving multiple size-classes of G. locusta, but only large, male gammarids consumed smaller juveniles in the presence of Ulva spp. as an alternative food source. However, no negative effects of cannibalism were found on total grazing impact. A model using size-specific grazing rates and growth rates of G. locusta and of Ulva spp. suggests that approximately 62 young juvenile, or 27 adult G. locusta are needed per gram DW of Ulva spp. to control the algal growth during ambient nutrient conditions, and approximately 2.6 times as many gammarids during enhanced nutrient conditions. On the Swedish west coast, densities and mean sizes of G. locusta in eelgrass beds are below these critical values, suggesting that the gammarids will not be able to control the growth of the filamentous macroalgae. However, in the field cage experiment, immigration of juveniles and reproduction of encaged adult G. locusta resulted in unexpectedly high densities of G. locusta (>4,000 individual m⁻²), and very low biomass of Ulva spp. in both ambient and nutrient-enriched treatments. Although the high numbers of juveniles in all cages precluded any significant treatment effects, this suggests that in the absent of predators, the population of G. locusta can grow significantly and control the biomass of Ulva spp. Furthermore, low grazing of Ectocarpales in the laboratory and high biomass of these filamentous brown algae in the field indicate a preference for the more palatable green algae Ulva spp. This study indicates that the high grazing capacity of G. locusta, in combination with high reproduction and growth rates, would allow the amphipod to play a key role in Z. marina ecosystems by controlling destructive blooms of filamentous green algae. However, high predation pressure appears to prevent large populations of G. locusta in eelgrass beds on the Swedish west coast today.     

Oxidation of sulphite originating from flue gas desulphurization waste in soil

The rate of catalyzed oxidation of sulphite originating from flue gas desulphurization (FGD) waste was studied under varying conditions. The pH dependence was examined in aqueous solution at the pH range of 5 to 8, the effect of soil moisture was studied in sieved soil of different moisture contents, and the oxidation of sulphite to a soil as FGD waste, was measured at different depths in a field experiment. The experiments that the half-lives of sulphite in aqueous solution were between 0.5 and 2 hours and that the oxidation rate was highest at the lowest pH. In sieved soil the half-lives of sulphite were in the range of 3 to 20 days with the oxidation rate at the highest moisture content, indication that oxygen availability was the limiting factor. The slowest decrease of the sulphite concentration was found at a soil depth of 8–10 cm which was the where the highest background concentration of sulphite was found in control plots, too.Environmental Geochemistry and Health, 1988,10(1), 26–30     

The Effect of an Ergonomic Intervention on Musculoskeletal,Psychosocial and Visual Strain of VDT Entry Work: Organization and Methodology of the International Study

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal—eyestrain—psychosocial—stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

Testing common sediment-porewater distribution models for their ability to predict dissolved concentrations of POPs in The Grenlandsfjords, Norway

This study compares in situ observed porewater concentration of persistent organic pollutants (POPs) with predictions by common solid-water phase distribution models. Bottom sediments were sampled in The Grenlandsfjords, Norway, and the interstitial porewater was isolated from the solids by centrifugation and filtration. Both phases were analysed for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F), polycyclic aromatic hydrocarbons (PAH), and organic carbon. Based on the sediments' solid phase content of POPs, organic carbon, and soot carbon, we used the organic matter partitioning (OMP), and also the soot and organic matter partitioning (SOMP) model to estimate the porewater concentration. The OMP model gave better agreement to observations than the SOMP model for both PCDD/Fs and PAHs. The observed concentration of the PCDD/Fs in the sediments' porewater was much higher than in the deep water of the fjord. The logarithm of the organic matter-water partitioning coefficent (log K(OC)) in the porewater had positive linear regression on the logarithm of the octanol-water partitioning coefficient (log K(OW)). The slope of the regression model was indistinguishable from 1, except for the PAHs as a group which had a slope less than 1. This contrasts to previous studies undertaken in The Grenlandsfjords water column, where the slopes were higher than 1 for PCDD/Fs, and the K(OC) were much higher than the K(OW). One explanation may be that the influence of POPs adsorption to soots decrease because competitive sorption by other compounds in the sediment are higher than in the water column. This indicates that the sorption isotherms for these POPs need better understanding in order to be applicable in both the water column and the porewater.     

Determination of isocyanates, aminoisocyanates and amines in air formed during the thermal degradation of polyurethane

An air sampling method for the determination of isocyanates, aminoisocyanates and amines formed during the thermal degradation of polyurethane (PUR) is presented. The method is based on the collection of air samples using impinger flasks containing di-n-butylamine (DBA) in toluene with a glass fibre filter in series. Isocyanates are derivatized with DBA to urea derivatives, and amines are derivatized in a subsequent work-up procedure with ethyl chloroformate (ET) to carbamate esters. Amine, aminoisocyanate and isocyanate derivatives were characterized using liquid chromatography-time of flight mass spectrometry (LC-TOFMS) and liquid chromatography-chemiluminescent nitrogen detection (LC-CLND). Quantification was performed by LC-MS, monitoring molecular ions [MH]+ in the electrospray mode. The instrumental detection limits for amines, aminoisocyanates and isocyanates were in the ranges 30-40, 2-3 and 3-70 fmol, respectively. Thermal degradation products of PUR were observed in high concentrations during welding in district heating pipes and PUR-coated metal sheets. Eleven isocyanates, three amines and five aminoisocyanates were identified. The concentrations of isocyanates, aminoisocyanates and amines in samples collected in the smoke close to the welding spot were in the ranges 150-650, 4-290 and 1-70 ppb, respectively. In samples collected in the breathing zone, isocyanates and aminoisocyanates were observed in the ranges 9-120 and 4-19 ppb, respectively. The compounds were present in both gas and particle phases. Volatile compounds dominated in the gas phase, whereas less volatile compounds dominated in the particle phase. The method presented makes it possible to sample and determine amines and aminoisocyanates, in addition to isocyanates. The need to monitor these compounds is clearly illustrated by the high concentrations found during the thermal degradation of PUR.     

Determination of technical grade isocyanates used in the production of polyurethane plastics

A method for determination of technical grade isocyanates used in the production of polyurethane (PUR) is presented. The isocyanates in technical grade products were characterised as di-n-butylamine (DBA) derivatives using LC-MS and LC-chemiluminescent nitrogen detection (CLND) and the total isocyanate content was compared to a titration assay. For collection of isocyanates in air, an impinger-filter sampling technique with DBA as derivatisation reagent was used. Characterised DBA and nonadeuterium labelled DBA derivatives of isocyanates in technical products were used as calibration standards and internal standards, respectively, in the analysis of air samples. Three workplaces were studied where PUR products were produced either by spraying or by moulding. In both technical products and in air samples, a number of monomeric, oligomeric and prepolymeric isocyanates of e.g. methylenebisphenyl diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were characterised. Several of these have not previously been described in workplace atmospheres. In the technical isocyanate products, between 69 and 102% of the NCO content determined by titration was accounted for by LC-CLND. Quantifications of a wide range of isocyanates in air samples were performed with correlation coefficients in the range 0.988-0.999 (n= 8) and the instrumental detection limits were 0.7-25 pg. At the two workplaces where MDI- and HDI isocyanurate-based products were sprayed, the isocyanate composition in the air reflected the composition in the technical product. At the workplace where a MDI-based product was used in a moulding process, only the monomeric isocyanates were found in the air. The advantage of using characterised technical grade isocyanates as analytical standards was clearly demonstrated and the possibility of using index compounds when monitoring isocyanate exposure is discussed.