Conservation impacts of commercial cultivation of endangered and overharvested plants

Overharvesting is one of the greatest threats to species survival. Farming overharvested species is a conservation strategy that can meet growing market demand and conserve wild populations of the target species. This strategy is compatible with the international community's desire to uphold the right of local communities to use biological resources to support their livelihoods. However, studies investigating whether farming can alleviate poaching pressure have focused almost exclusively on animals. To address the shortfall in plant-focused studies, we compiled information on commercial cultivation of threatened plants to assess its conservation benefits. Because China's rising middle class has rapidly intensified demand for wildlife products, we searched the scientific literature published in Chinese (China National Knowledge Infrastructure and Baidu) and in English. We found 32 reports that contained data on 193 internationally or nationally threatened plant species that were under commercial cultivation. These reports showed that cultivations of 82% of the 193 species were sustained by collecting whole plants from the wild periodically or continuously. Although based on a small sample size, species that were maintained in cultivation only through artificial propagation or seeds collected in the wild were likely associated with a reported reduction in wild harvesting of whole plants. Even so, results of correlation analyses suggested that production system, scale, and when a species began being cultivated had little effect on conservation status of the species, either globally or in China. However, species brought into cultivation relatively recently and on a smaller scale were more likely to have undergone a reduction in collecting pressure. Farming of nonmedicinal plants was most problematic for species conservation because wild plants were laundered (i.e., sold as cultivated plants). For effective conservation, policy to guide cultivation operations based on the target species’ biological characteristics, cultural significance, market demand, and conservation status is needed.     

CEN Standards for Testing and Certifying Personal Protective Equipment—Status Quo and Deficiencies: Examples

By establishing the internal market, the European Union intended to create an area in which safety and health at work are guaranteed. For this purpose, a series of directives was passed.

The EC Directive 89/686/EEC “Approximation of the laws of the Member States relating to personal protective equipment” is of particular interest to the manufacturers of personal protective equipment (PPE). On the European level, harmonized standards, that put these basic health and safety requirements into more concrete terms have to be available. The European Standardizing Committee (CEN) is charged with the elaboration of European standards.

A total of 176 standards relating to personal protective equipment have to be setup; 57 of them are available at present. All CEN members are obliged to transpose them without modification into national standards. Formerly existing national standards have to be withdrawn.

Existing European standards sometimes show deficiencies regarding the specification of requirements according to Directive 89/686/EEC: the standardization of PPE for special fields of application and insufficient harmonization of provisions for different PPE serving the same protective purpose. Test methods are not always described precisely enough.     

Anoxic gas recirculation system for fouling control in anoxic membrane reactor

Anoxic gas recirculation system was applied to control the membrane fouling in pilot-scale 4-stage anoxic membrane bioreactor(MBR). In the anaerobic-anoxic-anoxic-aerobic flow scheme,hydrophilic polytetrafluoroethylene(PTFE) membrane(0.2 μm, 7.2 m2/module) was submerged in the second anoxic zone. During 8 months operation, the average flux of the membrane was 21.3L/(m2·hr). Chemical cleaning of the membrane was conducted only once with sodium hydroxide and sodium hypochlorite. Dissolved oxygen(DO) concentration in the second anoxic zone was maintained with an average of 0.19 ± 0.05 mg/L. Gas chromatography analysis showed that the headspace gas in the second anoxic reactor was mainly consisted of N2(93.0% ± 2.5%), O2(3.8% ± 0.6%), and CO2(3.0% ± 0.5%), where the saturation DO concentration in liquid phase was 1.57 mg/L. Atmospheric O2 content(20.5% ± 0.8%) was significantly reduced in the anoxic gas. The average pH in the reactor was 7.2 ± 0.4. As a result, the recirculation of the anoxic gas was successfully applied to control the membrane fouling in the anoxic MBR.     

Structural effect of the in situ generated titania on its ability to oxidize and capture the gas-phase elemental mercury

Structural effect of the in situ generated TiO(2) sorbent particle was examined for its ability to capture elemental mercury under UV irradiation in a simulated combustion flue gas. Titania particles were prepared by thermal gas-phase oxidation of Titanium (IV) isopropoxide (TTIP) using a high temperature electric furnace reactor. The structural characteristics of the in situ generated TiO(2) at various synthesis temperatures were investigated; size distribution and the geometric mean diameter were measured using a scanning mobility particle sizer, while fractal dimension and radius of gyration were evaluated from the transmission electron microscopy images. Results from the Hg(0) capture experiment show that with increasing titania synthesis temperature, the overall aggregate size increases and the morphology becomes more open-structured to gas-phase Hg(0) and UV light, resulting in the improved mercury removal capability.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

Modification of Aliphatic Polyesters and Their Reactive Blends with Starch

Modified polycaprolactone was synthesized by melt reaction of PCL and reactive monomers such as glycidyl methacrylate (GMA) and maleic anhydride (MAH) in the presence of benzoyl peroxide in Brabender mixer. MAH showed a different grafting phenomenon compared to GMA. The reaction mechanism was discussed with different reactive monomers. Reactive blends of the PCL-g-GMA and the gelatinized starch with glycerin were prepared and their mechanical properties and biodegradabilities were investigated. Reactive blends of PCL-g-GMA and starch showed well-dispersed starch domain in the matrix and better mechanical strength than the unmodified PCL/starch blend. However, the reaction between PCL-g-GMA and starch induced a crosslinking during the reactive blending and this crosslinking in the blend lowered the biodegradation of the blend during the composting test. The biodegradability was investigated by the weight loss and surface morphology change of the blend in the composting medium.     

Chamber evaluation of a portable GC with tunable retention and microsensor-array detection for indoor air quality monitoring

The evaluation of a novel prototype instrument designed for on-site determinations of VOC mixtures found in indoor working environments is described. The instrument contains a miniature multi-stage preconcentrator, a dual-column separation module with pressure-tunable retention capabilities, and an integrated array of three polymer-coated surface acoustic wave sensors. It was challenged with dynamic test-atmospheres of a set of 15 common indoor air contaminants at parts-per-billion concentrations within a stainless-steel chamber under a range of conditions. Vapours were reliably identified at a known level of confidence by combining column retention times with sensor-array response patterns and applying a multivariate statistical test of pattern fidelity for the chromatographically resolved vapours. Estimates of vapour concentrations fell within 7% on average of those determined by EPA Method TO-17, and limits of detection ranged from 0.2 to 28 ppb at 25 degrees C for 1 L samples collected and analyzed in <12 min. No significant humidity effects were observed (0-90% RH). Increasing the chamber temperature from 25 to 30 degrees C reduced the retention times of the more volatile analytes which, in turn, demanded alterations in the scheduling of column-junction-point pressure (flow) modulations performed during the analysis. Reductions in sensor sensitivities with increasing temperature were predictable and similar among the sensors in the array such that most response patterns were not altered significantly. Short-term fluctuations in concentration were accurately tracked by the instrument. Results indicate that this type of instrument could provide routine, semi-autonomous, near-real-time, multi-vapour monitoring in support of efforts to assess air quality in office environments.