Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

纳米材料职业安全领域风险管理策略与措施

随着纳米材料的广泛应用,相关工作人员面临的潜在风险逐渐引起社会的重视。从监管角度看,纳米材料职业安全成为一个主要问题。本文参考奥地利科学院技术评估研究所出版的文章,概述了健康风险、检测和测量方法修订、工作场所评估等重要论题及权威机构和工业界已有的对工人安全和预防保健方面的建议。同时也介绍了我国开展的相关标准制定及研究、重要纳米材料的生物效应与安全性评价等基础性工作,以期为我国纳米材料职业安全的监管和评估提供参考。     

城市学校建筑抗震防灾安全综合评价

学校的防灾安全越来越得到人们的重视,是城市防灾安全规划中的一项重要内容.在城市化快速发展的时代,新的灾种不断发生,出现自然灾害和人为技术事故的可能性也在增加.     

间歇曝气潜流人工湿地的污水脱氮效果

采用间歇曝气运行方式,提升潜流人工湿地生活污水处理系统中的溶解氧浓度,强化脱氮效果。结果表明,间歇曝气运行方式有效提高了湿地内部溶解氧水平,曝气时溶解氧浓度可达6~9 mg/L,停止曝气后,溶解氧浓度迅速下降至0.5 mg/L以下,在湿地内部营造了一种交替的好氧和缺氧环境,分别促进好氧硝化和缺氧反硝化作用。在水力停留时间为3 d的情况下,间歇曝气潜流人工湿地系统对氨氮、总氮和COD的去除率分别可达到98.0%、87.6%和96.3%,较常规潜流人工湿地系统分别提高了74.1%、56.4%和18.1%,实现了氨氮、总氮和COD的同步高效去除。     

煤基腐殖酸对外源砷胁迫下玉米生长及生理性状的影响简

为了筛选用于砷污染土壤治理的煤基腐殖酸,采用盆栽实验研究了施用不同种类和浓度的煤基腐殖酸及EDTA对外源砷胁迫下玉米株高、株鲜重、株干重、根干重、砷积累量、叶片抗氧化酶（POD,SOD和CAT）活性和脯氨酸含量的影响。结果表明,11种供试煤基腐殖酸均促进了玉米生长,提高了叶片POD、SOD和CAT活性。其中6和10号腐殖酸可降低土壤砷活性和显著抑制玉米吸收和积累砷,而8和9号腐殖酸增加了土壤活性砷和显著促进了玉米对砷的吸收和累积,且不同程度地强于EDTA。除8和9号外,其余腐殖酸均可明显降低玉米叶片脯氨酸的含量。EDTA可显著促进玉米吸收和积累砷,且加剧了砷对玉米的危害。因此,8和9号供试煤基腐殖酸可以替代EDTA活化土壤砷,与植物配合以提高砷污染土壤的植物修复速度和效果,而6和10号供试煤基腐殖酸则可用于土壤砷钝化剂,以保证作物产品的安全。     

废纸造纸废水结垢原因及防治对策研究

针对无锡某废纸造纸企业产生的污水经厌氧-好氧-化学混凝处理后,出水在放流池产生结垢现状,对各段污水中主要离子浓度进行跟踪分析,并对结垢的组分、结垢原因、机理和防治结垢对策进行了探讨。结果表明:垢样的主要成分为CaCO3;污水中含有较高浓度的钙离子和碳酸氢根离子是导致结垢的主要原因,较高的水温、pH值、流速、流动状态、池壁的粗糙程度以及PAC的投加对结垢也有一定的影响;最佳防治对策为使用Ca(OH)2+PAM代替PAC+PAM混凝,保证COD达标排放同时,也解决了出水结垢问题。     

工业废水中多金属离子的吸附净化

以含有Si、Al、Ca、C元素的矿物材料作为基质,经特定条件处理后造粒成型加工成轻质多孔Si-Al-Ca-C结构的吸附材料。研究了该吸附材料对工业废水中多种金属离子的吸附性能,探讨了影响吸附性能的因素。研究结果表明,在一定条件下,Si-Al-Ca-C吸附材料对工业废水中Al3+、Ca2+、Mn2+、Cu2+、Fe3+、Mg2+、As3+和Zn2+的净化率分别高达99.34%、99.82%、98.26%、98.16%、97.76%、97.01%、100%和89.09%。金属离子残留浓度分别为0.152、0.07、0.012、0.02、0.119、0.311、0和0.259 mg/L,均低于国家污水综合排放标准(GB8978-1996)一级标准。     

滇池流域水资源综合平衡管理研究

随着滇池治理的进展,在今后一个时期内,恢复滇池饮用水环境功能,成为滇池治理的首要目标和任务。围绕滇池流域水资源供求平衡,采用水资源全要素配置框架下的三次平衡分析理论,从整体上分析了滇池流域水资源供求平衡关系及存在的主要问题,提出了以需求为导向,建立滇池流域水资源综合平衡管理目标和措施。分析表明：在滇池治理的基础上,通过建立滇池流域水资源综合平衡管理体系,落实管理措施,从总量平衡的理论上能够充分发挥引水工程的作用,恢复滇池饮用水环境功能,实现水量、水质供求的综合平衡。建议进一步开展量化分析和模拟实验研究,为在滇池流域实施综合平衡管理提供可靠依据和建议