新型电极及其电解阳离子染料染色模拟液研究

本文研制了一种可用于废水处理的新型阳极和阴极，研制电极电解处理离子染料色模拟液时，分解电压低，脱色率高，电能消耗少。     

Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

河北平原的地面沉降

本文通过分析河北省的水准测量资料，揭示了河北平原的地面沉降情况。整个河北平原都存在着下降的趋势。在大范围的下降背景上，又分布着许多大大小小的沉降中心。这些沉降区多数都是以城市为中心，互相连成一片，下沉速度有逐渐加快的趋势。河北平原地面沉降的原因，除少数有构造运动的因素以外，绝大多数都是集中过量开采地下水造成的。     

洪水灾害损失信息系统—FLOODIS系统设计

本文借助遥感技术，设计出一个专题地理信息系统一洪灾损失信息系统ＦＬＯＯＤＩＳ，为损失评估模型提供评估区域洪水灾害损失的各种自然地理和社会经济信息以及经系统内专家模块处理后的专题信息，同时对其计算结果进行多种方式输出。     

Study of factors associated with risk of work-related stairway falls

This report describes a study of stairway risk factors based on video tape recordings of workers using 31 flights of stairs selected from among the industries with the highest frequency and severity rates for stair-related injuries. The video tapes were reviewed to identify all incidents, i.e., falls, trips, slips, missteps, and moments of temporary instability. The characteristics of the 98 stair users who were involved in an incident were compared to the characteristics of a matched group of stair users who did not have incidents. The factors that best discriminated between the incident group and the nonincident group were: (a) The incident group tended to be those whose movement was impeded by others and who were older; and (b) The nonincident group tended to be those who were wearing glasses and those who were very large or heavy individuals. The influence of stairway physical features on the risk of injury was examined using correlation analysis. The measure of risk was the incidence rate (observed incidents per number of observed uses) for each flight as well as for each tread. Among the several variables significantly correlated with higher incidence rate are: (a) higher effective riser height and less effective tread depth; the safest stairs have an effective riser height not greater than 7 in. (18 cm) and an effective tread depth no less than 11 in. (27 cm); and (b) for descent only (92% of the injuries), the size of the nosing projection; it appears that nosing projections that exceed $\text{11}\text{16}$ in. (1.8 cm) are associated with higher incidence rates.     

事故致因的突变模型

在众多论述伤亡事故致因的理论中，都没有解释为何系统元素的连续变化引起系统状态的突变（事故），以及人、物因素在这种突变过程中的作用。本文引入突变理论这一数学工具，指出系统内某些元素的连续变化导致系统状态的突然改变，较好地解决了这个问题，通过建立事故致因突变模型，提出了提高系统安全性的原则。     

移动式颗粒床除尘器最佳入口风速下的阻力计算

分析论述了ＹＸＫＣ型除尘器在最佳入口风速下的阻力计算方法及其影响，指出了进一步研究和改进设计的方向与途径。     

易燃易爆重大危险源安全监测系统校验的等周期数学模型

按照校验费和损失费最小以及有效度最大的原则分别给出了安全监测系统校验的等周期模型。当安全监测系统的无故障工作时间服从威布尔分布时，给出了模型的解法。     

高频超声波降解4-氯酚的反应机理及试验研究

探讨了高频超声波（1.7MHz)降解4-氯酚的反应过程和反应机理，研究了高频超声波降解4-氯酚的效果及4-氯酚的初始浓度，高级氧化方法（AOPs)等因素对降解效果的影响。试验结果表明，高频超声波降解4-氯酚为一级反应，超声波空化效应在降解过程中起主导作用。超声波与其他氧化方法联用可大大提高降解效率。具有良好的工业应用前景。     

膜生物反应器废水处理新工艺

概述了国内外膜生物反应器的研究与应用状况；介绍了其构形与特点；分析了膜污染的成因，影响因素及防制措施；指出了今后的研究方向。