防护鞋靴有害物质限量值研究

本文对防护鞋靴有害物质限量值研究进行了阐述。参考国内外标准,设定防护鞋靴有害物质限制项目和限量值。在检测分析我国具有市场代表性的16个防护鞋靴产品中有害物质含量数据基础上,判断设定限制项目及限量值的可行性。检测结果表明我国防护鞋靴生产技术水平基本能够达到限量要求,设定的限量值可以作为制定国家标准的参考依据。     

GB/T 7702-2008《煤质颗粒活性炭试验方法》标准的研究

通过对GB/T 7702-2008《煤质颗粒活性炭试验方法》的修订,研究了国际上先进国家的ASTM、JIS、ГОСТ同类标准内容。本系列标准除等同采用部分国际先进标准外,还结合本国特点增加了部分国外标准没有的内容,同时着重对碘吸附值测定进行了深入研究,确定了国际先进的碘吸附值试验方法。     

天然气应用对兰州大气环境的影响

煤烟型污染是兰州市大气污染严重的主要原因之一，西气东输工程对改变兰州市能源结构，改善城市环境质量具有非常重要的意义。根据兰州市大气污染现状和特性，以2000年为基准，分析研究了兰州市利用天然气前后能源结构，主要污染源及大气污染物排放量的变化。针对污染源状况和兰州市天然气用气规划，选用适宜模式预测了兰州市利用天然气后的各主要污染物的年平均浓度，计算了空气质量的改善程度。     

不同氧化还原条件下氯乙烯的微生物脱氯

氯乙烯是土壤和地下水中存在的污染物,其去除的有效途径之一为微生物降解.本研究在温度20℃、氯乙烯初始浓度100μmol/L条件下,对不同氧化还原条件下四氯乙烯、cis-二氯乙烯及一氯乙烯的微生物降解进行了实验.结果表明,在铁还原和碳酸氢盐存在条件下,四氯乙烯以0.26/d和0.31/d的速率分别脱氯为三氯乙烯和cis-二氯乙烯.在脂肪酸存在条件下,四氯乙烯、cis-二氯乙烯和一氯乙烯均完全脱氯为乙烯,但后两者脱氯速率(0.04/d)明显低于前者(0.57/d).在反硝化、锰还原及硫还原条件下,不同取代氯乙烯降解均不明显.当环境温度降至12℃,脱氯菌活性降低,但氯乙烯完全脱氯还原过程仍可发生.     

南方典型水源地及水产养殖区抗生素的复合污染特征及生态风险

抗生素作为生长促进剂和疾病预防控制药物在水产养殖领域得到广泛应用,目前在许多环境水体中检测到不同类型的抗生素。环境中抗生素的残留问题也是目前环境研究的热点问题之一。本研究选择南方某市8个水源地和5个典型水产养殖区作为研究对象,采用固相萃取、高效液相色谱串联三重四级杆质谱联用仪方法,调查了32种常用抗生素在水体中的含量水平和空间分布特征,揭示了抗生素的来源,并对其生态风险进行了评价。水源地共检出12种抗生素,浓度范围为0.12～44.6 ng·L~(-1),以磺胺甲噁唑含量最高;水产养殖区检出14种抗生素,浓度范围为0.95～716 ng·L~(-1),以氯四环素检出浓度最高。整体上水产养殖区抗生素的浓度高于水源地。抗生素浓度与环境因子的冗余分析表明,水产养殖和生活污水排放是水体中抗生素的主要来源。对检出的13种抗生素进行生态风险评价,单一抗生素而言,环丙沙星、氧氟沙星、磺胺嘧啶、氯四环素和脱水红霉素的风险商值大于0.01而小于0.1,表现为低风险。总抗生素风险商值加和在大部分水源地大于0.01而小于0.1,表现为低风险;总抗生素风险商值加和在2个水产养殖区大于0.1,表现为中等风险,水产养殖区抗生素的长期生态风险应该引起关注。     

镉对单环刺螠非特异性免疫及组织蓄积的影响

为探究镉(Cd)对海洋动物的毒性效应,考察了不同质量浓度(0.005、0.05和0.5 mg·L~(-1)) Cd处理对单环刺螠相关免疫生理指标及主要组织中Cd蓄积量的影响。结果表明:Cd胁迫下,血细胞密度(density of hemocyte, DHC)先升后降再升,酚氧化酶(phenoloxidase, PO)活力先升后降,溶菌酶(lysozyme, LSZ)活力先降后升再降,至处理96 h,处理组DHC均显著高于对照组(P0.05),总蛋白含量变化不显著;除低浓度胁迫组(0.005 mg·L~(-1))PO活力与对照组相近外,其他处理组的PO和LSZ活力均显著低于对照组(P0.05)。超氧化物歧化酶(superoxide dismutase, SOD)活力和丙二醛(malondialdehyde, MDA)含量总体呈上升趋势,过氧化氢(H_2O_2)含量先升后降再升,至胁迫96 h,各处理组SOD活力、MDA和H_2O_2含量均显著高于对照组(P0.05)。总之,Cd胁迫对单环刺螠非特异性免疫影响显著,Cd的短期胁迫可刺激DHC、PO和LSZ升高,免疫力增强,而高浓度Cd的胁迫时间较长会造成机体解毒能力下降,持续刺激机体产生过氧化反应,MDA含量升高,可作为单环刺螠在Cd长期胁迫下的免疫检测指标。不同胁迫浓度组单环刺螠肌肉和消化道中的Cd含量随胁迫时间均呈上升趋势,且存在显著的时间-剂量-效应关系(P0.05),其蓄积量水平为:消化道肌肉,具有组织特异性。     

冬季工况下微型钢管桩热力响应特性数值分析

结合微型钢管桩热力响应特性现场试验,基于数值模拟方法,研究了冬季工况下流速、布桩形式等因素对微型钢管能量桩热力响应特性的影响规律。研究结果表明:换热效率增幅随流速的增加成非线性增长且最终趋于稳定,就本项目微型钢管桩而言,最佳流速为0.51~0.77 m/s;桩身轴向最大附加拉应力约为桩身混凝土抗拉强度设计值的53.8%,不会导致桩体破坏;桩身轴向最大附加拉应力与温度改变之间的关系约为σ-T=110ΔT。     

Source attribution for mercury deposition with an updated atmospheric mercury emission inventory in the Pearl River Delta Region,China

Estimated anthropogenic Hg emission was 11.9 tons in Pearl River Delta for 2014. Quantifying contributions of emission sources helps to provide control strategies. More attentions should be paid to Hg deposition around the large point sources. Power plant, industrial source and waste incinerator were priorities for control. A coordinated regional Hg emission control was important for controlling pollution. We used CMAQ-Hg to simulate mercury pollution and identify main sources in the Pearl River Delta (PRD) with updated local emission inventory and latest regional and global emissions. The total anthropogenic mercury emissions in the PRD for 2014 were 11,939.6 kg. Power plants and industrial boilers were dominant sectors, responsible for 29.4 and 22.7%. We first compared model predictions and observations and the results showed a good performance. Then five scenarios with power plants (PP), municipal solid waste incineration (MSWI), industrial point sources (IP), natural sources (NAT), and boundary conditions (BCs) zeroed out separately were simulated and compared with the base case. BCs was responsible for over 30% of annual average mercury concentration and total deposition while NAT contributed around 15%. Among the anthropogenic sources, IP (22.9%) was dominant with a contribution over 20.0% and PP (18.9%) and MSWI (11.2%) ranked second and third. Results also showed that power plants were the most important emission sources in the central PRD, where the ultra-low emission for thermal power units need to be strengthened. In the northern and western PRD, cement and metal productions were priorities for mercury control. The fast growth of municipal solid waste incineration were also a key factor in the core areas. In addition, a coordinated regional mercury emission control was important for effectively controlling pollution. In the future, mercury emissions will decrease as control measures are strengthened, more attention should be paid to mercury deposition around the large point sources as high levels of pollution are observed.     

Adsorption of Ammonium by Graphene Oxide-Based Composites Prepared by UV Irradiation and Using as Slow-Release Fertilizer

A novel sodium alginate-grafted poly(acrylic acid)/graphene oxide (NaAlg-g-PAA/GO) composite hydrogel was prepared via ultraviolet irradiation, and characterized by infrared spectroscopy spectrometer. X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. It was employed to adsorb NH₄⁺ from aqueous solution and used as slow-release nitrogen fertilizers (SNFs). Result indicated that the adsorption process for NH₄⁺ reached equilibrium within 50 min, with the adsorption capacity of 6.6 mmol g^?1 even if 30 wt% GO was incorporated. The results of adsorption kinetic and isotherm were well described by the pseudo-second-order and Freundlich model. The thermodynamics analysis showed the adsorption process was spontaneous. The study indicated excellent water-holding ratio of soil with 2 wt% SNFs was 81.2%, and nitrogen release was up to 55.1% within 40 days in soil. Overall, NaAlg-g-PAA/GO could be considered as an efficient adsorbent for the recovery of nitrogen with the agronomic reuse as a fertilizer.     

Distillers’ grains anaerobic digestion residue biochar used for ammonium sorption and its effect on ammonium leaching from an Ultisol

Environmental Science and Pollution Research - The aim of this work was to explore the potential application of biochar from distillers’ grains anaerobic digestion residue pyrolyzed at...