Role of membrane and compound properties in affecting the rejection of pharmaceuticals by different RO/NF membranes

This study was conducted to assess the merits and limitations of various high-pressure membranes, tight nanofiltration (NF) membranes in particular, for the removal of trace organic compounds (TrOCs). The performance of a low-pressure reverse osmosis (LPRO) membrane (ESPA1), a tight NF membrane (NF90) and two loose NF membranes (HL and NF270) was compared for the rejection of 23 different pharmaceuticals (PhACs). Efforts were also devoted to understand the effect of adsorption on the rejection performance of each membrane. Difference in hydrogen bond formation potential (HFP) was taken into consideration. Results showed that NF90 performed similarly to ESPA1 with mean rejection higher than 95%. NF270 outperformed HL in terms of both water permeability and PhAC rejection higher than 90%. Electrostatic effects were more significant in PhAC rejection by loose NF membranes than tight NF and LPRO membranes. The adverse effect of adsorption on rejection by HL and ESPA1 was more substantial than NF270 and NF90, which could not be simply explained by the difference in membrane surface hydrophobicity, selective layer thickness or pore size. The HL membrane had a lower rejection of PhACs of higher hydrophobicity (log D>0) and higher HFP (>0.02). Nevertheless, the effects of PhAC hydrophobicity and HFP on rejection by ESPA1 could not be discerned. Poor rejection of certain PhACs could generally be explained by aspects of steric hindrance, electrostatic interactions and adsorption. High-pressure membranes like NF90 and NF270 have a high promise in TrOC removal from contaminated water.

Open image in new window

     

The influences of pH and ionic strength on the sorption of tylosin on goethite

As one of the widely used antibiotics in the world, the environmental risks of tylosin (TYL) received more and more attention. In order to assess its environmental fate and ecological effects accurately, it is necessary to understand the sorption properties of TYL on the soils/sediments. The sorption of TYL on goethite at different pH and ionic strength conditions were measured through a series of batch experiments and the sorption data of TYL were fitted by Freundlich and dual-mode sorption models. It was obvious that sorption was strongly dependent on pH and ionic strength. Sorption capacity of TYL increased as the pH increased and ionic strength decreased. The pH and ionic strength-dependent trends might be related with complexation between cationic/neutral TYL species and goethite. The sorption affinity of TYL on goethite decreased as ionic strength increased, which only occurred at higher TYL concentrations, suggested that inner complex might have dominated process at low concentrations and outer complex might occur at higher concentrations of TYL. Spectroscopic evidence indicated that tricarbonylamide and hydroxyl functional groups of TYL might be accounted for the sorption on mineral surfaces. The experimental data of TYL sorption could be fitted by surface complexation model (FITEQL), indicating that ≡FeOH with TYL interaction could be reasonably represented as a complex formation of a monoacid with discrete sites on goethite. The sorption mechanism of TYL might be related with surface complexation, electrostatic repulsion, and H-bounding on goethite. It should be noticed that the heterogeneous of sorption affinity of TYL on goethite at various environment to assess its environment risk.     

A statistic comparison of multi-element analysis of low atmospheric fine particles (PM2.5) using different spectroscopy techniques

Over the past few decades, the metal elements(MEs) in atmospheric particles have aroused great attention. Some well-established techniques have been used to measure particlebound MEs. However, each method has its own advantages and disadvantages in terms of complexity, accuracy, and specific elements of interest. In this study, the performances of inductively coupled plasma–optical emission spectrometry(ICP-OES) and total reflection X-ray fluorescence spectroscopy(TXRF) were evaluated for qualit...     

卧式螺旋污泥好氧动态堆肥技术的研究

利用卧式螺旋式污泥好氧堆肥装置进行间歇式动态堆肥,对污水厂厌氧消化污泥进行了中温堆肥试验研究.通过控制各组堆肥的含水率、物料配比和通气量,重点探讨各种条件下堆体温度与有机物降解的关系.试验结果表明,厌氧消化污泥以木屑为调理剂在装置中可以实现好氧堆肥处理,其适宜的物料控制参数为:污泥:木屑=10:1～1.5(湿重比),堆肥含水率50%～60%;过程控制参数为:通风量为6.7～8.3 m3/h·t,发酵周期为8 d,温度45℃.     

Occurrence,sorption, and transformation of free and conjugated natural steroid estrogens in the environment

Environmental Science and Pollution Research - Natural steroid estrogens (NSEs), including free estrogens (FEs) and conjugated estrogens (CEs), are of emerging concern globally among public and...     

Characteristic and mechanism of sorption and desorption of benzene on humic acid

Environmental Science and Pollution Research - The sorption/desorption behaviors of benzene, toluene, ethylbenzene, and xylene (BTEX) on soil organic matter (SOM) have a significant influence on...     

干/湿混法对中温SCR催化剂碱土金属中毒的影响

为探究碱土金属中毒规律以及中毒方法对中毒的影响,采用干混法和湿混法模拟CaO和MgO对商业催化剂的中毒过程。研究中毒后催化剂脱硝特性的改变及差异,并对催化剂中毒前后催化剂物理、化学性能变化进行探究。结果表明：湿混法模拟SCR催化剂中毒后脱硝效率的降低大于干混法;模拟中毒实验应该采用干混法;湿混法对于催化剂比表面积、孔径分布、表面V5+含量以及化学吸附氧的不利影响强于干混法;CaO对催化剂脱硝效率的降低大于MgO。2种中毒方法的对比研究为延长催化剂寿命提供了理论依据。     

Mn2O3/γ-Al2O3在超临界水氧化中催化活性的研究

采用浸渍法制备了Mn2O3/γ-Al2O3催化剂,在超临界水中催化氧化降解1,5-萘二磺酸,探索了催化剂Mn2O3活性组分负载量、催化剂空速和反应溶液pH对Mn2O3/γ-Al2O3催化剂活性的影响。结果表明：Mn2O3/γ-Al2O3的催化活性在一定范围内随Mn2O3活性组分负载量的增加而提高;在一定范围内,Mn2O3/γ-Al2O3空速越小,模拟废水的COD去除率越高;Mn2O3/γ-Al2O3催化活性在反应溶液呈酸性情况下比碱性时高。     

铁还原菌作用下含镉聚合硫酸铁絮体中铁还原与镉释放规律及其影响因素

选取Shewanella oneidensis MR-1为供试铁还原菌,旨在研究MR-1在还原含Cd聚合硫酸铁絮体过程中,絮体中Fe（Ⅲ）还原、Cd释放规律及影响因素。结果表明,扰动可促进絮体中Fe（Ⅲ）还原及Cd释放;絮体中Cd的添加使得Fe（Ⅲ）还原过程中产生的二次矿物主要物相由磁铁矿转变为针铁矿,且Cd浓度的增加导致Fe（Ⅲ）还原率逐渐降低,Cd释放率也逐渐降低;絮体中Fe浓度的逐渐增大同样使得Fe（Ⅲ）还原率逐渐降低,Cd释放率则先增大后减小;腐殖质类模型物质蒽醌-2,6-二磺酸钠的添加可提高絮体中Fe（Ⅲ）的还原率,进而促进Cd的释放。对同一体系或不同体系间的Fe（Ⅲ）还原率及Cd释放率进行线性拟合,结果发现较大的Fe（Ⅲ）还原率能够导致絮体中Cd的更多释放,从而对环境造成更大的危害。     

ASBBR处理超高盐榨菜腌制废水

研究以超高盐榨菜腌制废水为对象,考察填料种类、负荷和温度对ASBBR启动及处理效能的影响。研究结果表明,在温度为30℃,盐度为7%（NaCl计）,负荷为1 kg COD/（m³·d）的条件下,采用聚氨酯泡沫填料的反应器经67 d可成功构建超高盐榨菜腌制废水厌氧生物处理系统,较未设置填料、投加半软性组合填料、球形组合填料和聚苯乙烯泡沫填料的反应器分别缩短了26、6、24和18 d,且运行至第79天,可使出水COD降至375 mg/L,COD去除率为92.86%;通过对负荷的阶段逐步提高,可提升反应器有机负荷至15 kg COD/（m³·d）,使进水COD为（27 000±2 000）mg/L的超高盐废水,出水COD均值降至2 200 mg/L ,平均去除率达到92.03%;温度对反应器处理效能影响显著,温度分别为30、25、20、15和10℃时,反应器COD去除率分别为92.63%、84.07%、67.13%、54.61%和44.19%。