Variations in exposure to in-vehicle particle mass and number concentrations in different road environments

Road environments significantly affect in cabin concentration of particulate matter (PM). This study conducted measurements of in-vehicle and on-road concentrations of PM10, PM2.5, PM1, and particle number (PN) in size of 0.02–1 µm, under six ventilation settings in different urban road environments (tunnels, surface roads and elevated roads). Linear regression was then used to analyze the contributions of multiple predictor variables (including on-road concentrations, temperature, relative humidity, time of day, and ventilation settings) to measured variations. On-road measurements of PM2.5, PM1, and PN concentrations from the open surface roads were 5.5%, 3.7%, and 16% lower, respectively, than those measured in tunnels, but 7.6%, 7.1% and 24% higher, respectively, than those on elevated roads. The highest on-road PM10 concentration was observed on surface roads. The time series pattern of in-vehicle particle concentrations closely tracked the on-road concentrations outside of the car and exhibited a smoother profile. Irrespective of road environment, the average I/O ratio of particles was found to be the lowest when air conditioning was on with internal recirculation, the highest purification efficiency via ventilation was obtained by switching on external air recirculation and air conditioning. Statistical models showed that on-road concentration, temperature, and ventilation setting are common factors of significance that explained 58%-80%, 64%-97%, and 87%-98% of the variations in in-vehicle PM concentrations on surface roads, on elevated roads, and in tunnels, respectively.

Implications: Inside vehicles, both driver and passengers will be exposed to elevated particle concentrations. However, for in-vehicle particles, there has been no comprehensive comparative study of the three-dimensional traffic environment including tunnels surface roads and elevated roads. This study focuses on the analysis of the trends and main influencing factors of particle concentrations in different road environments. The results can provide suggestions for the driver's behavior, and provide data support for the environmental protection department to develop pollutant concentration limits within the vehicle.     

Development of a microscale emission factor model for particulate matter for predicting real-time motor vehicle emissions

The U.S. Environmental Protection Agency's National Exposure Research Laboratory is pursuing a project to improve the methodology for modeling human exposure to motor vehicle emissions. The overall project goal is to develop improved methods for modeling the source through the air pathway to human exposure in significant exposure microenvironments. Current particulate matter (PM) emission models, particle emission factor model (used in the United States, except California) and motor vehicle emission factor model (used in California only), are suitable only for county-scale modeling and emission inventories. There is a need to develop a site-specific real-time emission factor model for PM emissions to support human exposure studies near roadways. A microscale emission factor model for predicting site-specific real-time motor vehicle PM (MicroFacPM) emissions for total suspended PM, PM less than 10 microm aerodynamic diameter, and PM less than 2.5 microm aerodynamic diameter has been developed. The algorithm used to calculate emission factors in MicroFacPM is disaggregated, and emission factors are calculated from a real-time fleet, rather than from a fleet-wide average estimated by a vehicle-miles-traveled weighting of the emission factors for different vehicle classes. MicroFacPM requires input information necessary to characterize the site-specific real-time fleet being modeled. Other variables required include average vehicle speed, time and day of the year, ambient temperature, and relative humidity.     

Sustainable watershed management: an international multi-watershed case study

Global freshwater resources are being increasingly polluted and depleted, threatening sustainable development and human and ecosystem health. Utilizing case studies from 4 different watersheds in the United States, Japan, Switzerland, and Brazil, this paper identifies the most relevant sustainability deficits and derives general vectors for more sustainable water management. As a consequence of the demographic and economic developments experienced in the last few decades, each watershed has suffered declines in water quality, streamflow and biotic resources. However, the extent and the cultural perception of these water-related problems vary substantially in the different watersheds, leading to specific water-management strategies. In industrialized countries, exemplified by the US, Switzerland, and Japan, these strategies have primarily consisted of finance- and energy-intensive technologies, allowing these countries to meet water requirements while minimizing human health risks. But, from a sustainability point of view, such strategies, relying on limited natural resources, are not long-term solutions. For newly industrialized countries such as Brazil, expensive technologies for water management are often not economically feasible, thus limiting the extent to which newly industrialized and developing countries can utilize the expertise offered by the industrialized world. Sustainable water management has to be achieved by a common learning process involving industrialized, newly industrialized, and developing countries, following general sustainability guidelines as exemplified in this paper.     

Local-scale fluxes of carbon dioxide in urban environments: methodological challenges and results from Chicago

Much attention is being directed to the measurement and modeling of surface-atmosphere exchanges of CO2 for different surface types. However, as yet, few measurements have been conducted in cities, even though these environments are widely acknowledged to be major sources of anthropogenic CO2. This paper highlights some of the challenges facing micrometeorologists attempting to use eddy covariance techniques to directly monitor CO2 fluxes in urban environments, focusing on the inherent variability within and between urban areas, and the importance of scale and the appropriate height of measurements. Results from a very short-term study of CO2 fluxes, undertaken in Chicago, Illinois in the summer of 1995, are presented. Mid-afternoon minimum CO2 concentrations and negative fluxes are attributed to the strength of biospheric photosynthesis and strong mixing of local anthropogenic sources in a deep mixed layer. Poor night-time atmospheric mixing, lower mixed layer depths, biospheric respiration, and continued missions from mobile and fixed anthropogenic sources, account for the night-time maxima in CO2 concentrations. The need for more, longer-term, continuous eddy covariance measurements is stressed.     

A novel one-step synthesis for carbon-based nanomaterials from polyethylene terephthalate (PET) bottles waste

Nowadays our planet suffers from an accumulation of plastic products that have the potential to cause great harm to the environment in the form of air, water, and land pollution. Plastic water bottles have become a great problem in the environment because of the large numbers consumed throughout the world. Certain types of plastic bottles can be recycled but most of them are not. This paper describes an economical solvent-free process that converts polyethylene terephthalate (PET) bottles waste into carbon nanostructure materials via thermal dissociation in a closed system under autogenic pressure together with additives and/or catalyst, which can act as cluster nuclei for carbon nanostructure materials such as fullerenes and carbon nanotubes. This research succeeded in producing and controlling the microstructure of various forms of carbon nanoparticles from the PET waste by optimizing the preparation parameters in terms of time, additives, and amounts of catalyst.

Implications: Plastic water bottles are becoming a growing segment of the municipal solid waste stream in the world; some are recycled but many are left in landfill sites. Recycling PET bottles waste can positively impact the environment in several ways: for instance, reduced waste, resource conservation, energy conservation, reduced greenhouse gas emissions, and decreasing the amount of pollution in air and water sources. The main novelty of the present work is based on the acquisition of high-value carbon-based nanomaterials from PET waste by a simple solvent-free chemical technique. Thus, the prepared materials are considered to be promising, cheap, eco-friendly materials that may find use in different applications.     

Investigation of low-level <Superscript>242</Superscript>Pu contamination on nutrition disturbance and oxidative stress in <Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.

Plutonium associated with higher molecular weight molecules is presumed to be poorly mobile and hardly plant available. In our present study, we investigate the uptake and effects of Pu treatments on Solanum tuberosum plants in amended Hoagland medium at concentrations of [²⁴²Pu] = 100 and 500 nm, respectively. We found a direct proof of oxidative stress in the plants caused by these rather low concentrations. For the confirmation of oxidative stress, we explored the production of nitric oxide (NO) and hydrogen peroxide (H₂O₂) by epifluorescence microscopy. Oxidative stress markers like lipid peroxidation and superoxide radicals (O₂ ^??) are monitored through histochemical analysis. The biochemical parameters i.e. chlorophyll and carotenoids are measured as an indicator of cellular damage in the tested plants including the enzymatic parameters such as catalase and glutathione reductase. From our work, we conclude that Pu in low concentration has no significant effects on the uptake of many trace and macroelements. In contrast, the content of O₂ ^?? , malondialdehyde (MDA), and H₂O₂ increases with increasing Pu concentration in the solution, while the opposite effects was found for NO, catalase, and glutathione reductase. These findings prove that even low concentration of Pu regulates ROS production and generate oxidative stress in S. tuberosum L.     

Effects of clearfelling on stream and soil water aluminium chemistry in three UK forests

Data are presented demonstrating how clearfelling has changed soil and stream water aluminium chemistry. For soil waters, a strong empirical relationship was observed between inorganic aluminium (Al(inorg)) and total inorganic anion (TIA) concentrations. Before felling, chloride and sulphate accounted for the largest proportion of the TIA concentration. After felling, in soils where nitrification was active, nitrate became increasingly important. Where this led to an increase in TIA, Al(inorg) concentrations increased. Over five years, nitrate concentrations have fallen, along with TIA, resulting in a sympathetic decline in Al(inorg). Streams draining clearfelled areas initially became more acid, although chloride and sulphate concentrations decreased. Stream water nitrate concentrations increased soon after felling and remained higher than controls for up to four years. While nitrate concentrations were high, Al(inorg) remained unchanged. Subsequently, as nitrate and TIA decreased, Al(inorg) also declined to concentrations below those in the control stream. Clearfelling upland forests will not necessarily result in immediate improvements in water quality, although long-term benefits may be seen before canopy-closure of the next crop.     

Fractionation of atmospheric acid and base components within storm events by precipitation scavenging processes

Concentrations of ions in storm rainwater in Texas have been monitored for each 0.254 mm increment of precipitation. The changes in concentrations have been analyzed to investigate the role of differential rates of scavenging of particulate matter of differing particle size, and especially the major acid and base components. The empirical trend at the onset of rainfall is a chemical fractionation of acids and bases with correspondingly wide pH variations. These results are confirmed by model calculations, which show a significant preferential scavenging of calcium relative to sulfate in the first 10 mm of rainfall, resulting in fractionation of bases and acids from their atmospheric concentrations. Previous studies, using Target Transformation Factor Analysis of ion concentrations in storm precipitation and regional ambient aerosol data, statistically determined the average source for acidic secondary species and alkaline particulate matter. Two types of crustal sources were identified as western and eastern soil dust. In this study, an alternate physical explanation for these two soil dust factors is offered. As a storm progresses, the elements in the local soil dust are fractionated as a result of their differential rates of precipitation scavenging, enriching species predominantly in the fine particle size and depleting elements predominantly in the coarse particle size. This fractionation process results in a single source having different elemental ratios at the beginning and at the end of a rain event. For Austin, Dallas, and Tyler, Texas, the soil dust previously identified as being from eastern sources could, instead, be a fractionated form of the western soil source.     

Deposition of atmospheric ammonia to moorlands

Micrometeorological methods were applied to measure fluxes of atmospheric ammonia (NH3) to moorlands. Measurements were made in a wide variety of surface conditions and included both Calluna vulgaris (L.) Hull and Eriophorum vaginatum L. dominated sites. NH3 was found to deposit rapidly to all the sites investigated, providing large deposition velocities (Vd, typically 10-40 mm s(-1)) and usually minimal surface resistances (rc). A small number of measurements were made in frozen conditions and suggest a possible exception to this pattern with mean rc of 50-200 s m(-1). The effect of vegetation drying was also investigated and a possible increase in rc observed, though this was small (< 10 s m(-1)). The results are interpreted in terms of the processes controlling exchange; it is shown that NH3 deposition is predominantly to the leaf surfaces and that the net NH3 compensation point approaches zero. Annual estimates show that dry deposition of NH3 is a major source of atmospheric nitrogen to moorland ecosystems. For two typical UK sites subject to background air concentrations, NH3 dry deposition is of similar magnitude to equivalent NH4+ inputs in wet deposition. In the vicinity of emission sources, NH3 dry deposition is expected to dominate inputs of atmospheric nitrogen.     

Cadmium availability to the cyanobacterium Synechocystis aquatilis in solutions containing chloride

Availability of cadmium to Synechocystis aquatilis (estimated by 109Cd sorption and cadmium toxicity-14C method) in solutions containing cadmium and complexing (KCl) or non-complexing (KNO3) salts, in the range of 0-0.5 m was investigated. Both cadmium surface adsorption and transport into the cells were lower in solutions containing cadmium chloride complexes (CdCl+, CdCl2, CdCl3-) than in those containing cadmium in the form of Cd2+. Also, cadmium toxicity in solutions of higher KCl concentrations, in which CdCl+ and CdCl2 forms predominated, was significantly limited.