Distribution of polycyclic aromatic hydrocarbons in agricultural soils in South Korea

The content and type of polycyclic aromatic hydrocarbons (PAH) in soils from paddy fields and upland areas in South Korea were determined using gas chromatography linked to mass spectrometry (GC–MS). The distribution map of total PAH content was obtained as a contour plot using a geographical information system. The overall distribution of PAH was found to be closely related to the pollution sources, the size of city and the type of industry. The average content of total PAH in all samples was 236 μg kg⁻¹, and the range was from 23.3 to 2834 μg kg⁻¹. The highest concentrations were found in soils sampled near iron processing plants. The concentration of PAH decreased in the order fluoroanthene>benzo(b)fluoroanthene>pyrene. Special PAH compound ratios, such as phenanthrene/anthracene and fluoroanthene/pyrene, were calculated to evaluate the origin. The collected data suggested that the pyrogenic origins such as motor vehicle exhaust and heavy industry emission were the dominant source of PAH in Korean soils.     

Nutrient accumulation in trees and soil following irrigation with municipal effluent in Australia

Irrigation of tree crops is being evaluated as a method of land disposal of municipal effluent in Australia. A study was carried out from 1980-84 in which seven tree species were sprinkler-irrigated with effluent at an annual rate of 1191-1752 mm. Effective weed control and frequent irrigation resulted in good survival of all species (range 83-100%) at 12 months. Total productivity was estimated at age 4 years by measuring biomass of each species inclusive of litter and roots to a soil depth of 80 cm. Biomass production of the high-yielding species, flooded gum (Eucalyptus grandis) and Sydney blue gum (E. saligna), was around 10 kg m(-2). Percentage leaf mass of these species was small (8-9%) compared with 25% and 29% for the relatively slow-growing river she-oak (Casuarina cunninghamiana) and radiata pine (Pinus radiata). Accumulation of nutrients in the total biomass differed significantly between species and ranged from 34-54 g m(-2) for nitrogen, 4.0-10.4 g m(-2) for phosphorus, 2.1-12.2 g m(-2) for sodium, 22-34 g m(-2) for potassium, 12-61 g m(-2) for calcium and 4.7-9.3 g m(-2) for magnesium. River she-oak and river red gum (E. camaldulensis), because of their relatively large crown and litter masses, accumulated more nitrogen, phosphorus, potassium and calcium than flooded gum or Sydney blue gum. Chemical properties of soils (0-150 cm) were measured in 1980 and again in 1984. Irrigation significantly increased pH (by around 1 unit), throughout the profile. Concentrations of total phosphorus, and exchangeable sodium, calcium and magnesium were increased in the upper profile. Overall, soil chemical properties were not adversely affected by effluent irrigation over the 4-year period, though there was a trend towards more sodic conditions in the soil profile. Nutrient accumulation in soil occurred mainly in the 0-35 cm depth, coinciding with the main root zone of the trees. Renovation of the effluent was therefore estimated as the amount of each nutrient accumulated in the biomass (averaged over the seven species) plus soil (0-35 cm), expressed as a percentage of amount applied in irrigation over the 4 years; that is, nitrogen, 29%; phosphorus, 78%; sodium, 15%; potassium, 26%; calcium, 98% and magnesium, 54%.     

Framing the Long-Term <Emphasis Type="Italic">In Situ</Emphasis> Liability Issue for Geologic Carbon Storage in the United States

This paper examines how legal standards of liability may apply to geologic carbon storage. The liability regime governing geologic carbon storage will shape the technology's cost-effectiveness and overall attractiveness. We classify potential sources of liability into operational, in situ, and climate liability. As a first step, we explore in situ liability in the United States. After summarizing legal standards of liability including negligence, breach of implied warranty, strict liability, and product liability, we discuss how liability may be addressed at the level of the federal government, state government, industry, and the firm. Finally, we address the implications of judicial treatment of liability for carbon storage, including the apportionment of liability and the adequacy of current regulations.     

Phosphorus sorption characteristics of estuarine sediments under different redox conditions

Phosphorus (P) plays a major role in eutrophication of aquatic systems. Estuarine sediments could function as sources or sinks for P to the overlying water column depending upon their physico-chemical characteristics. Understanding of P sorption phenomena in estuarine sediments is important in regulating the P availability in estuaries. Phosphorus sorption characteristics of sediments from the Indian River Lagoon, Florida, USA, were determined to examine the role of selected physico-chemical properties of the sediments on soluble reactive P status in estuary water. Mean equilibrium P concentrations (EPCo) of 0.75 mg L(-1) and mean P sorption maxima (Smax) of 32.2 mg kg(-1) were obtained under anaerobic conditions, compared with EPCo of 0.05 mg L(-1) and Smax of 132.7 mg kg(-1) under aerobic conditions. The higher EPCo values under anaerobic conditions and the greater Smax values under aerobic conditions were associated with amorphous and poorly crystalline iron. These results suggest that sediments enriched with amorphous and poorly crystalline forms of iron act as an excellent reservoir for P by adsorbing excessive P in aerobic sediment zones and releasing it upon burial under anaerobic conditions. This study also indicates that P compounds in sediments independently maintain equilibrium with P in solutions. Thus, heterogeneous systems like soil and sediment simply behave as a mixture of homogeneous surfaces as far as their P sorption characteristics are concerned, and hence can be successfully described by the Langmuir and Freundlich models.     

Influence of water treatment residuals on phosphorus solubility and leaching

Laboratory and greenhouse studies compared the ability of water treatment residuals (WTRs) to alter P solubility and leaching in Immokalee sandy soil (sandy, siliceous, hyperthermic Arenic Alaquod) amended with biosolids and triple superphosphate (TSP). Aluminum sulfate (Al-WTR) and ferric sulfate (Fe-WTR) coagulation residuals, a lime softening residual (Ca-WTR) produced during hardness removal, and pure hematite were examined. In equilibration studies, the ability to reduce soluble P followed the order Al-WTR > Ca-WTR = Fe-WTR > hematite. Differences in the P-fixing capacity of the sesquioxide-dominated materials (Al-WTR, Fe-WTR, hematite) were attributed to their varying reactive Fe- and Al-hydrous oxide contents as measured by oxalate extraction. Leachate P was monitored from greenhouse columns where bahiagrass (Paspalum notatum Flugge) was grown on Immokalee soil amended with biosolids or TSP at an equivalent rate of 224 kg P ha(-1) and WTRs at 2.5% (56 Mg ha(-1)). In the absence of WTRs, 21% of TSP and 11% of Largo cake biosolids total phosphorus (PT) leached over 4 mo. With co-applied WTRs, losses from TSP columns were reduced to 3.5% (Fe-WTR), 2.5% (Ca-WTR), and <1% (Al-WTR) of applied P. For the Largo biosolids treatments all WTRs retarded downward P flux such that leachate P was not statistically different than for control (soil only) columns. The phosphorus saturation index (PSI = [Pox]/ [Al(ox) + Fe(ox)], where Pox, Al, and Fe(ox) are oxalate-extractable P, Al, and Fe, respectively) based on a simple oxalate extraction of the WTR and biosolids is potentially useful for determining WTR application rates for controlled reduction of P in drainage when biosolids are applied to low P-sorbing soils.     

The first commercial supercritical water oxidation sludge processing plant

Final disposal of sludge continues to be one of the more pressing problems for the wastewater treatment industry. Present regulations for municipal sludge have favored beneficial use, primarily in land application. However, several agencies and entities have warned of potential health risks associated with these methods. Hydrothermal oxidation provides an alternative method that addresses the health concerns associated with sludge disposal by completely converting all organic matter in the sludge to carbon dioxide, water, and other innocuous materials. A hydrothermal oxidation system using HydroProcessing, L.L.C.'s HydroSolids process has been installed at Harlingen, Texas to process up to 9.8 dry tons per day of sludge. Based on a literature review, this system is the largest hydrothermal oxidation system in the world, and the only one built specifically to process a sludge. Start up of Unit 1 of two units of the HTO system began in April 2001. Early results have indicated COD conversion rates in excess of 99.9%. Harlingen Waterworks System estimates that the HydroSolids system will cost less than other alternatives such as autothermal thermophilic aerobic digestion and more traditional forms of digestion that still require dewatering and final disposal. The Waterworks intends to generate income from the sale of energy in the form of hot water and the use of carbon dioxide from the HydroSolids process for neutralization of high pH industrial effluent. The Waterworks also expects to generate income from the treatment of septage and grease trap wastes.     

Performance of a low cost MBT prior to landfilling: study of the biological treatment of size reduced MSW without mechanical sorting

In France, the interest in Mechanical Biological Treatment (MBT) prior to landfilling is actually growing. In the absence of acceptance criteria for the waste to be landfilled, an alternative to the intensive, high-technology MBT can only find its place in the French context if it shows substantial benefits from an environmental, economic or operational point of view. This paper presents an experiment of low-cost MBT of size reduced MSW without material splitting. The performance of an experimental, pilot-scale mechanical and biological treatment process has been studied on 37.5 Mg of raw municipal solid waste. The mechanical process has been kept simple with only coarse shredding and no material recovery. The biological treatment, which was a low-cost forced aeration process, was monitored for 25 weeks. The biogas production potential of the waste was reduced by 90% to 19 NL kgDM(-1). The initial AT4 index of 82.9 mg O2 gDM(-1) decreased to 16.0 mg O2 gDM(-1). After 25 weeks of aerobic treatment, the dry mass loss reached 37%, while the mass of waste going to landfill was reduced by 28%. The average performances of the process were explained by the biological process itself, which was not optimal, and also by the characteristics of the input waste. The high particle size of the treated waste and the high content of slowly biodegradable matter (such as paper and cardboard) may both be significant drawbacks for the biological stabilisation of waste.