Chromate transport through columns packed with surfactant-modified zeolite/zero valent iron pellets

Chromate transport through columns packed with zeolite/zero valent iron (Z/ZVI) pellets, either untreated or treated with the cationic surfactant hexadecyltrimethylammonium (HDTMA), was studied at different flow rates. In the presence of sorbed HDTMA, the chromate retardation factor increased by a factor of five and the pseudo first-order rate constant for chromate reduction increased by 1.5-5 times. The increase in rate constant from the column studies was comparable to a six-fold increase in the rate constant determined in a batch study. At a fast flow rate, the apparent delay in chromate breakthrough from the HDTMA modified Z/ZVI columns was primarily caused by the increase in chromate reduction rate constant. In contrast, at a slower flow rate, the retardation in chromate transport from the HDTMA modified Z/ZVI columns mainly originated from chromate sorption onto the HDTMA modified Z/ZVI pellets. Due to dual porosity, the presence of immobile water was responsible for the earlier breakthrough of chromate in columns packed with zeolite and Z/ZVI pellets. The results from this study further confirm the role of HDTMA in enhancing sorption and reduction efficiency of contaminants in groundwater remediation.     

Nautical safety and efficiency: simulation and reality

The paper deals with training and research using maritime simulation techniques to provide cost-effective and safe solutions to maritime transportation problems. In order to reduce the probability of accidents, training and research is required in which the human factors are fully taken into account.     

Information processing style and decision making

Information processing style, often termed cognitive style, has gained prominence in the organizational behavior literature as researchers use it as a basis for studying decision making behavior, conflict, strategy development, and group processes. However, the many operational definitions and measures of cognitive style have produced inconsistent and confusing results. This study tested the interrelationship among four measures of this construct: the Myers–Briggs Type Indicator, the Group Embedded Figures Test, the Learning Styles Inventory, and the Decision Style Inventory. Measures that appeared to be conceptually linked through their underlying theories were compared. Results indicate that the various measures are not strongly interrelated and appear to be measuring different aspects of information processing and decision making. Copyright © 1999 John Wiley & Sons, Ltd.     

High velocity fabric filtration for control of coal-fired boilers

As a follow-up to a pilot study, a full scale investigation of applying high velocity fabric filtration to coal-fired boiler fly ash control was conducted. Two filter systems were separately applied to two 60,000 lb/h coal-fired boilers. Performance evaluations conducted over the course of a year included total mass removal efficiency and fractional efficiencies. One filtration system employed Teflon felt as the filter media while the second system employed Gore-Tex, a Polytetrofluorethylene (PTFE) laminate on PTFE woven backing. During the course of the year, a limited number of glass felt and woven glass bags were introduced into the house containing Gore-Tex. As a separate option, the second system was outfitted entirely with woven glass bags. Preliminary results indicate acceptable performance at air-to-cloth ratio of 6 to 1. Future plans call for utilizing one of the baghouse systems for SO₂ removal.     

Electrical augmentation of granular bed filters

A study of the enhancement of the collection efficiency of granular bed filters by electrical means is reported. By applying electric fields of a few kV/cm (DC or AC) across a bed of insulating granules, the efficiency for submicron charged aerosol is greatly increased, to the point where the efficiency minimum normally observed with such filters in the size range 0.1–1 μm is removed. The performance of such filters is explored as a function of granule size, applied field, face velocity and charge state of the entering aerosol with both a bench-scale flow system (to 40 ft³/min; 1.1 m³/min) and a wind tunnel (to 600 ft³/min; 17 m³/min). Some theoretical estimates are made to identify the most likely physical mechanism of electrical enhancement, and a number of potential application possibilities are discussed.     

Mutagenic and carcinogenic potency of extracts of diesel and related environmental emissions: Study design, sample generation, collection, and preparation

A major diesel emissions research program has been initiated by the U.S. Environmental Protection Agency to assess the human health risk associated with increased use of diesel automobiles. This program is intended to establish the mutagenic and carcinogenic potency of complex organics associated with diesel particles as well as comparative particle-bound organics from other environmental emissions for which human epidemiological data are available. The mobile source samples selected for this study were collected from a heavy-duty diesel engine, a series of light-duty diesel passenger cars, and a gasoline catalyst automobile. The comparative source samples incorporated into the study were cigarette smoke condensate, coke oven emissions, roofing tar emissions, and benzo(a)pyrene. The samples were tested using three mutagenic assays and four carcinogenic assays as prescribed by a test matrix. This report describes the study design, particle generation, and sample collection and preparation. A brief summary of the bioassays is also included.     

Water and soil pollution by Spent lubricating oils

This paper shows that spent lubricating oils from automobile engines generate carboxylic acids on environmental exposure. Samples of exposed oils, isolated from polluted river water and shore muds obtained from various locations, showed a direct proportionality between carboxylic acid content and time of exposure. Carboxylic acids were isolated by solvent extraction and studied by infrared spectroscopy.     

The impact of coal utilization in Texas under the National energy plan

The paper describes the results of a study of the impact of the National Energy on the trend towards increased utilization of coal and lignite in Texas with forecasts of increased coal and lignite utilization for the electric utility and industrial sectors. Environmental impacts of this increased coal and lignite use are projected in terms of increased air pollutant emissions and air quality impacts. Economic costs of compliance with alternative source emission regulations are also projected for the electric utility industry.Lignite consumption in Texas under the National Energy Plan is projected to increase from the present 13 million metric tons in 1976 to 57 million metric tons annually by 1985. Sub-bituminous coal consumption in Texas is projected to increase from 1 million metric per year in 1976 to 49 million metric tons per year in 1985. Bituminous coal consumption in Texas is expected to increase from less than one million metric tons per year in 1976 to about 3 million metric tons per year in 1985.Major increases in sulfur oxides emissions from coal and lignite combustion in Texas can be expected by 1985 of up to 1.5 × 10⁹ kg per year without controls and 0.2 × 10⁹ kg per year with controls. Increases in acid precipitation formation will result in north-east Texas from extensive lignite usage for electric power generation as a detriment to agriculture. The photochemical air pollution problem in the Houston area will probably worsen primarily because of increased nitrogen oxides and sulfur oxides emissions because of industrial coal combustion. Capital costs of air pollution controls in Texas for coal-fired utility boilers are estimated as up to U.S. $3.9 billion by 1985, with total operating costs of up to U.S. $1.2 billion per year.     

An elemental rationing technique for assessing concentration data from a complex water system

Water samples have been collected at the surface and bottom layers at 51 locations throughout Chesapeake Bay. The suspended particulate and dissolved fractions of these samples have been analyzed for Cd, Ce, Co, Cu, Fe, Mn, Mo, Ni, Pb, Sc, Sn, Th, U, and Zn using neutron activation analysis and atomic absorption spectrometry. Special chemical procedures were used to preconcentrate the elements of interest in the dissolved samples and separate them from the salt water matrix. The elemental concentrations observed in the dissolved samples were evaluated by direct comparison to those found in coastal seawater; however, the elemental concentrations in the particulate samples (mass per volume of water) were strongly influenced by the total amount of particulate material suspended in the water at time of collection. A double normalization procedure was used to calculate crustal enrichment factors for each sample, and these enrichment factors provided both a means to observe sample-to-sample variations, and also allowed a crude comparison with the natural levels occurring in the earth's crust.