Biohydrogen production in continuous-flow reactor using mixed microbial culture.

The goal of the proposed project was to develop an anaerobic fermentation process that converts negative-value organic wastes into hydrogen-rich gas in a continuous-flow reactor under different operating conditions, such as hydraulic retention time (HRT), heat treatment, pH, and substrates. A series of batch tests were also conducted in parallel to the continuous study to evaluate the hydrogen conversion efficiency of two different organic substrates, namely sucrose and starch. A heat shock (at 90 degrees C for 15 minutes) was applied to the sludge in an external heating chamber known as a sludge activation chamber, as a method to impose a selection pressure to eliminate non-spore-forming, hydrogen-consuming bacteria and to activate spore germination. The experimental results showed that the heat activation of biomass enhanced hydrogen production by selecting for hydrogen-producing, spore-forming bacteria. The batch feeding at a shorter HRT of 20 hours (or higher organic loading rate) favored hydrogen production, whereas, at a longer HRT of 30 hours, methane was detected in the gas phase. The major organic acids of hydrogen fermentation were acetate, butyrate, and propionate. Up to 23.1% of influent chemical oxygen demand was consumed in biomass synthesis. Batch tests showed that the hydrogen-production potential of starch was lower than sucrose, and better conversion efficiency from starch was obtained at a lower pH of 4.5. However, addition of sucrose to starch improved the overall hydrogen-production potential and hydrogen-production rate. This study showed that sustainable biohydrogen production from carbohydrate-rich substrates is possible through heat activation of settled sludge.     

磷钨酸光催化降解甲基橙溶液的研究

以磷钨酸为光催化剂,在紫外灯照射下,对模拟染料废水甲基橙溶液进行光催化降解,并研究了催化剂加入量、pH值、甲基橙初始浓度和外加氧化剂H2O2对光催化降解效果的影响.结果表明,磷钨酸光催化剂加入量为300 mg/100 mL,pH=2.5时,甲基橙溶液的降解率明显高于其他pH值的降解率;在较低浓度下,甲基橙溶液的光催化降解反应符合一级动力学方程;外加氧化剂H2O2可提高光催化反应速率.     

连续流分段进水生物脱氮工艺控制要点及优化

主要介绍了分段进水生物脱氮工艺的系统工作原理及工艺特性,并探讨了该工艺运行操作和设计的几个重要影响因素,如进水流量分配比、溶解氧、污泥回流比、C/N比等,并在此基础上讨论了分段进水生物脱氮工艺的优化控制对策.     

Probabilistic risk assessment of abalone Haliotis diversicolor supertexta exposed to waterborne zinc

This paper describes a risk assessment approach that integrates predicted tissue concentrations of zinc (Zn) with a concentration-response relationship and leads to predictions of survival risk for pond abalone Haliotis diversicolor supertexta as well as to the uncertainties associated with these predictions. The models implemented include a probabilistic bioaccumulation model, which linking biokinetic and consumer-resource models, accounts for Zn exposure profile and a modified Hill model for reconstructing a dose-response profile for abalone exposed to waterborne Zn. The growth risk is assessed by hazard quotients characterized by measured water level and chronic no-observed effect concentration. Our risk analyses for H. diversicolor supertexta reared near Toucheng, Kouhu, and Anping, respectively, in north, central, and south Taiwan region indicate a relatively low likelihood that survival is being affected by waterborne Zn. Expected risks of mortality for abalone were estimated as 0.46 (Toucheng), 0.36 (Kouhu), and 0.29 (Anping). The predicted 90th-percentiles of hazard quotient for potential growth risk were estimated as 1.94 (Toucheng), 0.47 (Kouhu), and 0.51 (Anping). These findings indicate that waterborne Zn exposure poses no significant risk to pond abalone in Kouhu and Anping, yet a relative high growth risk in Toucheng is alarming. Because of a scarcity of toxicity and exposure data, the probabilistic risk assessment was based on very conservative assumptions.     

固定源废气监测工作若干技术问题的探讨

从监测工况、测点位置、采样过程、结果计算等几方面出发，结合实际经验，对大气固定污染源的监测工作中存在的一些疑难问题进行探讨。     

湿式氧化技术及其应用比较

对湿式氧化技术及其影响因素进行了介绍 ,叙述了各种因素的影响作用并对各因素的影响强弱进行了比较 ,认为反应温度和处理对象的性质是影响湿式氧化技术处理效果的关键因素。阐述了湿式氧化技术在废水处理、污泥处理、活性炭再生中的一些应用研究情况 ,并进行了比较。总结了湿式氧化技术的特点及其在环境治理中的优势     

聚苯乙烯基离子交换纤维去除铅离子的应用研究

聚苯乙烯其离子交换纤维是一种理想的离子交换材料。它的特殊的物理形态决定它对一些有害气体如铅烟、颗粒铅等具有很好的净化作用，铅烟净化效率可达８０％；对水溶液中毒性铅离子去除率可达８６％。该纤维可做为治理毒性铅离子的材料。     

京津冀民用燃煤减排对大气中BaP污染影响评估

运用空气质量模型CMAQ模拟评估民用燃煤减排政策对京津冀大气中BaP污染状况的改进效果,模拟包括作为基准情景的2014年和低消减和高消减2个减排情景.模拟结果表明：基准情景下,京津冀BaP年均浓度为2.54ng/m³,超过国家空气质量标准（1ng/m³）,呈现1月 > 4月 > 10月 > 7月的季节变化特点,反映出冬季供暖燃煤的影响;京津冀南部BaP浓度高于北部,推测原因是南部BaP排放量较高.1月削减民用燃煤排放量对降低该地区BaP浓度和沉降量效果最显著,低削减和高削减下,北京、保定、廊坊BaP浓度分别比基准情景降低30%和40%以上;4、7、10月削减民用燃煤排放量对该地区BaP浓度和沉降量的变化影响不大.京津冀民用燃煤联防联控能更加有效地降低该地区BaP浓度.     

关中典型城市及农村夏季PM2.5的化学组成对比

于2016年7~8月采集了陕西省西安市（城市）及蔺村（农村）夏季昼夜PM_2.5样品,分析其有机碳（OC）、元素碳（EC）和无机离子等化学组分的含量,探讨关中平原城市和农村地区PM_2.5的化学组成和来源的差异.结果表明,采样期间西安和蔺村的PM_2.5浓度分别为（49.7±22.8）和（62.6±14.2）μg/m³.西安PM_2.5中OC和EC的浓度[（6.5±2.5）μg/m³,（3.2±1.8）μg/m³]与蔺村[（6.8±1.8）μg/m³,（3.8±2.3）μg/m³]相当.西安OC/EC比值白天（2.6）高于夜晚（1.9）,蔺村反之（白天：1.6;夜晚：2.7）,主要是因为夜间城市地区重型卡车运输活动增强导致排放更多EC,而夜间农村地区人为活动较少导致EC排放显著降低.西安和蔺村无机离子总浓度分别为（20.2±14.6）和（30.1±10.5）μg/m³,占PM_2.5浓度的40.6%和47.6%.蔺村SO₄^2-的平均浓度高达19.0μg/m³,占PM_2.5浓度的30%以上,远高于西安（9.4μg/m³和18.9%）,主要与农村固体燃料（煤和生物质）使用有关.西安NO₃^-和Ca²⁺的浓度及其对PM_2.5的贡献、NO₃^-/SO₄^2-比值均明显大于蔺村,表明城市地区受机动车尾气和扬尘的影响更大.西安K⁺与Ca²⁺和Mg²⁺的相关性较强,而蔺村K⁺与EC的相关性显著强于西安,说明西安市区K⁺由粉尘源主导,而农村地区则主要来自生物质燃烧.     

深圳大学城园区典型OVOCs污染特征与来源解析

采用质子转移反应质谱仪（PTR-MS）对深圳大学城园区2017年不同季节（分干湿两季）的6种典型OVOCs和其他非甲烷烃类（NMHCs）进行连续在线监测,分析其干湿季的浓度特征与日变化规律,并应用光化学龄的参数化方法开展OVOCs的来源解析.结果表明,在观测的6种OVOCs中,甲醇的平均浓度最高,达10×10^-9~12×10^-9,其次是乙酸、丙酮和乙醛,约2~5×10^-9,甲酸和丁酮的含量最低,仅1×10^-9~2×10^-9.通过日变化观察到的OVOCs湿季峰值浓度时间明显早于干季,乙醛表现出与臭氧（O₃）相似的日变化特征,揭示了其可能存在二次来源;甲醇和丁酮的峰值浓度时间均早于O₃,可能存在重要的一次排放源.采用光化学龄模型解析出日间污染物来源比例：在污染较重的干季,甲醇、乙醛、丙酮和丁酮的人为一次源占主导,甲酸和乙酸的二次源是主要贡献者;在较清洁的湿季,天然源成为乙醛、丙酮、丁酮、甲酸和乙酸的主要来源.