Ecotoxicity evaluation of Cu- and Fe-CNT complexes based on the activity of bacterial bioluminescence and seed germination

The toxic effects of the composites of Fe~0 and Cu~0 with different percentages of CNTs were examined based on the activity of bacterial bioluminescence and seed germination. In terms of the EC_50 values, the toxic effects of Cu~0 on bacterial bioluminescence and seed germination were approximately 2 and 180 times greater than that of Fe~0, respectively. The toxicity increased with increasing CNT content in the Cu-CNT mixtures for both organisms,whereas opposite results were observed with Fe-CNT mixtures. The mean toxic effects of Cu-CNT(6%) were approximately 1.3–1.4 times greater than that of Cu-CNT(0%), whereas the toxic effects of Fe-CNT(6%) were approximately 2.1–2.5 times lower than that of Fe-CNT(0%) for both the bioluminescence activity and seed germination. The causes of this phenomenon are unclear at this point. More research will be needed to elucidate the mechanism of the toxicity of nano-mixture materials and the causes of the different patterns of toxicity with Cu-and Fe-CNT mixtures.     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

城市空气质量日报自动发布系统的研究与开发

详细介绍了“城市空气质量日报自动发布系统”的开发背景和开发过程 ,并对系统整体的架构和所用到的技术作了针对性的说明 ,阐明了作者对此类系统的前景和发展方向的看法。     

牛顿插值法在大气监测中的应用

本文将牛顿插值方法通过程序输入ＣＡＳＩＯｆｘ—４０００Ｐ计算器，应用到实际大气环境监测中，与实际监测结果作了对照，取得好的成果．该方法解决了基层监测站因特殊情况数据缺测的问题。     

上海汽车制造业涂装废气VOCs排放特征

于2015年10月对上海市嘉定区4家(A、B、C、D)汽车制造企业涂装废气ρ(VOCs)和组成特征进行了调查分析。结果表明,A、B、C、D厂涂装废气排放口ρ(VOCs)总为0. 743～6. 11 mg/m~3,主要检出物和最高检出值分别为:A厂二甲苯2. 06 mg/m~3、B厂二甲苯0. 578 mg/m~3、C厂甲苯2. 59 mg/m~3、D厂庚烷0. 274 mg/m~3;芳香烃类是A、B、C厂排放比例最高的VOCs组分,烷烃类是D厂排放比例最高的VOCs组分。指出,原、辅料种类影响排放物的主要成分,废气处理工艺类型影响排放物主要成分和浓度。     

渔业污染物排放总量核定办法的探讨

指出水产品代谢物的排出及没有被水产品利用的残饵是造成渔业养殖中水环境污染的重要原因之一。针对渔业污染物的生成情况，提出了渔业污染物排放总量的3种核定方法：实测法、物料平衡法、经验系数法。     

多介质环境目标值的应用

本文概述了多介质目标德的SAM/Ⅰ的方法。多介质目标值包括环境目标值和排放目标值。点源分析包括SAM/ⅠA,SAM/ⅠB,SAM/Ⅰ,SAM/Ⅱ。在缺少环境质量标准的情况下,使用多介质环境目标值有较强的适用性,且具有省时、省力、经济等特点。本文将多介质目标值的SAM/ⅠA点源分析方法引入聚氯乙烯生产废水的环境评价中,取得较为满意的结果。     

贵阳地区基本地质环境和主要岩土工程问题综述

本文系笔者对贵阳地区主要地质环境和工程地质特点进行的初步总结,内容为贵阳地区主要岩土构成情况、分布范围及与之相应的岩土工程地质特点和主要的岩土工程地质问题的描述,旨在给同行提供宏观性的了解和方向性的参考。     

硝化反应及其控制因素

对硝化菌和亚硝化菌的特性进行了分析，并就碳源不足的废水实行短程硝化—反硝化脱氮的途径进行探讨。     

Determination of arsenic in grain and soil by hydride nondispersive atomic fluorescence method

Quantity of trace arsenic in grain and soil was determined by hydride nondispersive atomic fluorescence method.Optimum conditions of measurement were selected in the experiment including the pH of the medium, reductive agent, the concentration and flowing velocity of KBH4, rate of carrier gas and atomized temperature. The reference sample of rice C was determined and the linear relationship of the calibration curve was plotted, indicating that the method was highly precise. In the experiment of recovery rate, the method was quite satisfactory.Based on the determination of hundreds of samples, it is proved that atomic fluorescence method is rapid, sensitive and low in interference. It is very efficient on determination of trace arsenic in soils and grains, especially in grains.