基于GSI露天矿边坡岩体参数的获取与稳定性分析

基于边坡稳定性分析几种数值分析方法的自身特点,对Hoek-Brown强度准则中GSI定量化相关的岩体体积节理数的确定方法进行了探讨研究。以某露天采矿边坡为例,采用三维显式有限差分法进行边坡稳定性数值分析,根据岩体野外现场调查资料和室内岩石试验,结合Hoek-Brown强度准则,使用所探讨的岩体体积节理数确定方法获取了数值计算所用的岩体力学参数,分析了该露采边坡开挖后的稳定性。研究方法有助于同类型露天采矿边坡稳定性防治工作的开展,为矿区安全生产的动态信息化分析提供了决策依据。     

风浪流影响下的船舶废气排放测度模型研究

船舶速度是船舶废气排放量计算的重要影响因子。为更加准确地测度船舶废气排放量,考虑海洋环境场对船舶速度的影响,分析了风、浪、流影响下的船舶运动,利用获取的实时风、浪、流信息对船舶AIS提供的航速进行修正,在此基础上建立了风、浪、流影响下的船舶废气排放测度模型,并介绍了船舶引擎功率的估算方法,以及排放因子和负荷因子的确定。最后,选取某散货船和客滚船的两个航次,分别采用传统模型和风、浪、流影响下的船舶废气排放计算模型进行计算,以CO2排放量反推油耗,并计算其与实际油耗的误差,结果表明,与传统模型计算结果相比,基于风、浪、流影响下的船舶废气排放测度模型得到的误差均有所减小,分别减小16.90%、18.60%、21.59%、21.94%,验证了模型的有效性。     

水蒸气对层流甲烷/空气扩散火焰中烟黑生成的影响

空气中水的存在会严重影响烷烃类扩散火焰中烟黑的生成,研究氧化剂流中水对烷烃类火焰的影响,对污染物控制及火灾扑救具有重要意义。模拟采用24步简化机理的有限速率化学反应模型、Moss-Brookes烟黑模型及Discrete Ordinates(DO)辐射模型,研究在空气中加入水对甲烷/空气层流伴流扩散火焰的影响,其中烟黑模型包括烟黑的成核、表面增长和氧化。结果表明,伴流空气中的水蒸气会降低火焰的温度、抑制烟黑的生成。这是因为:一方面,水蒸气降低了甲烷燃烧的温度,火焰温度的降低导致化学反应速率减慢,烟黑成核和表面生长速率随之降低,火焰中烟黑质量分数便减少;另一方面,由于水蒸气的加入使化学反应OH+H_2 H+H_2O(R(15))逆向反应加速,继而导致OH生成量增加。但由于氧气浓度降低使火焰体积增大,OH的浓度降低。从而导致烟黑的氧化速率降低,烟黑生成量增加。由于水蒸气的化学效应小于其温度效应,总体上烟黑质量分数降低。最后对比了模拟结果和试验结果。     

粮食损失研究进展和展望

我国人多地少,粮食安全事关国家安全。因此,在重视增产的同时,需要不断关注粮食损失问题。通过回顾现有粮食损失的研究,总结文献中提出的重要问题,展望未来可能的研究方向。分析表明,现有研究主要集中在：（1）减少粮食损失的目的和效果的研究。包括增加粮食供给、保障国家安全,减少不必要的资源浪费、减轻环境压力,保障粮食质量、保证食品安全,以及增加粮食价值链参与者的利润等。（2）粮食产后各环节损失水平估计及其影响因素研究。 （3）减少粮食损失的方法研究,包括品种改良、教育培训、改进储存设施等。在对现有研究综述的基础上,提出了几点展望：未来的研究应向粮食价值链下游环节拓展,对粮食质量损失程度进行定量分析,并关注粮食的最优损失水平。     

市县“双评价”中优势农业空间划定研究：理论、方法和案例

我国城镇化迅速蚕食宝贵的耕地资源和乡村聚落,保护基本农田、保护乡村、保护农业空间的需求迫在眉睫。新一轮市县国土空间规划“双评价”中,针对“农业空间”只重视基本农田和粮食生产的不足,旨在构建“优势农业空间”划定的理论框架和技术方法,为保护农林牧副渔大农业空间、全农业领域生产者和特色、重点农村地区奠定基础。（1）在生态保护极重要区以外,开展全域、全要素的种植业、畜牧业、渔业生产适宜性评价,识别农业生产适宜区和不适宜区;（2）基于高产稳产、规模经营和集中连片三原则,进一步细化评价重要经济作物适宜区、地域特色农产品适宜区等;（3）在此基础上,结合特色村落、重大农业基础设施要素识别优势农业空间。该技术框架在沈阳和温州市县“双评价”中取得了科学实用的评价成果,为我国正在展开的国土空间规划提供了科学支撑。     

剩余污泥深度干燥的研究进展

剩余污泥的含水率较高,对污泥进行干燥处理可以极大程度地减少污泥的水分。首先分析了污泥的含水特性和干燥污泥机理,然后分析了主要的污泥干燥方法研究现状,如热风干燥、过热蒸汽干燥、间接干燥、低温热流干燥、热泵干燥、太阳能干燥等。此外,探究了新型的污泥干燥技术及污泥干燥过程中可能产生的污染物,并在此基础上,对污泥干燥技术的发展方向进行了展望。     

Kinetic and mechanism studies of the ozonolysis of three unsaturated ketones

Reaction rate constants and products of 1-octen-3-one, 3-octen-2-one and 4-hexen-3-one with ozone were studied in a 100-L fluorinated ethylene propylene (FEP) Teflon film bag using absolute rate method at 298 ± 1 K and atmospheric pressure. The rate constants were (1.09 ± 0.12) × 10^?17, (3.48 ± 0.36) × 10^?17 and (5.70 ± 0.60) × 10^?17 cm³/(molecule?sec), respectively. According to the obtained rate constants, the effects of carbonyl were discussed. The carbonyl group in β position has a net withdrawing effect with respect to an olefinic bond, then causing the decline of rate constants. The quantum chemical calculation was used to explain the results of rate constants. The products of ozonolysis were mainly aldehydes, which have significant influence on the formation of SOA, and hence play an important role in the atmosphere. In this work, we detected the main products of reaction and proposed the reaction mechanism by combining the results of quantum chemical calculations. Atmospheric lifetime for three unsaturated ketones reacted with ozone was 36.4, 11.4 and 6.9 hr for 1-octen-3-one, 3-octen-2-one and 4-hexen-3-one, respectively.     

Optimized photocatalytic regeneration of adsorption-photocatalysis bifunctional composite saturated with Methyl Orange

Photo-responsive adsorption-photocatalysis nanocomposites are generally used in water and wastewater decontamination; however, the prolonged adsorption capacity of composites and the role of adsorption in concomitant photocatalysis are typically neglected. These composites can be regenerated under light irradiation as their adsorption capacity decreases. Herein, a novel adsorption-photocatalysis bifunctional nanocomposite, Bi-doped TiO₂ supported on powdered activated carbon (Bi₂O₃/TiO₂/PAC), was prepared using the sol-impregnation-hydrothermal procedure. Bi₂O₃/TiO₂/PAC with a secondary calcination temperature of 700°C under a nitrogen atmosphere was selected for maximum adsorption capacity on Methyl Orange (MO). The composite displayed an excellent adsorption capacity and was easily separated and recycled. The results demonstrate that 71.2% photocatalytic regeneration efficiency could be attained under visible light irradiation for 1 hr at an intensity of 750?W/m² and pH 7. Characterization of the as-prepared Bi₂O₃/TiO₂/PAC nanocomposite (700°C) indicates that it possesses a highly specific surface area and great optical properties, showing bifunctional adsorption-photocatalysis characteristics. The p-n heterojunction of the composite played a dominant role in the photocatalytic regeneration process, and effective degradation of MO could be achieved along with composite regeneration.     

Surface characterization of metal oxides-supported activated carbon fiber catalysts for simultaneous catalytic hydrolysis of carbonyl sulfide and carbon disulfide

The sol–gel method was used to synthesize a series of metal oxides-supported activated carbon fiber (ACF) and the simultaneous catalytic hydrolysis activity of carbonyl sulfide (COS) and carbon disulfide (CS₂) at relatively low temperatures of 60°C was tested. The effects of preparation conditions on the catalyst properties were investigated, including the kinds and amount of metal oxides and calcination temperatures. The activity tests indicated that catalysts with 5 wt.% Ni after calcining at 400°C (Ni(5)/ACF(400)) had the best performance for the simultaneous catalytic hydrolysis of COS and CS₂. The surface and structure properties of prepared ACF were characterized by scanning electron microscope-energy disperse spectroscopy (SEM-EDS), Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), carbon dioxide-temperature programmed desorption (CO₂-TPD) and diffuse reflectance Fourier transform infrared reflection (DRFTIR). And the metal cation defects were researched by electron paramagnetic resonance (EPR) method. The characterization results showed that the supporting of Ni on the ACF made the ACF catalyst show alkaline and increased the specific surface area and the number of micropores, then improved catalytic hydrolysis activity. The DRFTIR results revealed that -OH species could facilitate the hydrolysis of COS and CS₂; -COO and -C–O species could facilitate the oxidation of catalytic hydrolysate H₂S. And the EPR results showed that high calcination temperature conditions provide more active reaction center for the COS and CS₂ adsorption.     

SWAT模型在我国流域水环境模拟应用中的评估验证过程评价

模型评估验证是模型开发和应用过程中的重要环节,是管控模型应用于管理决策风险的重要手段.近年来,以SWAT模型为代表的流域水环境模型在我国流域水环境管理中得到广泛应用,但模型评估验证过程尚缺乏规范性指导.结合SWAT模型建模过程和模型评估验证的基本步骤,梳理总结SWAT模型评估验证过程的评价方法,针对确定研究或决策目标、获取输入数据、构建模型、模型率定验证、展示模型结果等5个阶段分别设计评价指标.筛选中国知网收录的2015—2017年发表的以SWAT模型为主题的428篇学术论文作为研究对象,评价现有研究的模型评估验证过程,分析我国SWAT模型评估验证的现状以及存在的问题和不足.评价结果表明,我国现有的SWAT模型应用研究总体比较重视模型评估验证过程,能够清晰定义研究区域、建模目标和期望产出,说明输入数据来源和质量以及模型概化、参数灵敏度分析、参数识别、不确定性分析的方法和结果,模型模拟效果较好.但是,针对SWAT模型评估验证方法的研究较少,在模型参数识别方面还存在参数选取未考虑研究区域特征、参数识别结果不合理等问题.建议在SWAT模型应用研究中关注参数灵敏度分析和参数识别,结合研究区域特征建立本地化应用数据库,加强模型评估验证方法研究.当模型应用于流域水环境管理决策时,应完整地开展模型评估验证,并分析模型不确定性对决策的影响.