Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

Responses of protists with different feeding habits to the changes of activated sludge conditions: A study based on biomass data

Changes of protists, which were categorized into different functional groups primarily according to their feeding habits, in two full-scale municipal wastewater treatment systems experiencing sludge bulking were investigated over a period of 14 months. Protist biomass represented 3.7% to 5.2% of total biomass on average under normal sludge conditions, and the percentage increased significantly (p < 0.05) under sludge bulking conditions. The biomass of Chilodonella spp., capable of eating filamentous bacteria, tended to decrease in both systems when sludge bulking occurred, showing that the abnormal growth of filamentous bacteria did not lead to a biomass bloom of this group of protists. On the other hand, the bactivorous protists represented more than 96% of total protist biomass, and the biomass of this group, particularly the attached ciliates, increased significantly (p < 0.05) when sludge bulking occurred. The significant increase of the attached ciliates may have possibly facilitated the growth of filamentous bacteria through selectively preying on non-filamentous bacteria and further exacerbated sludge bulking. The redundancy analysis and correlation analysis results showed that the biomass changes of the attached ciliates were primarily related to the sludge volume index and to some extent related to five-day biochemical oxygen demand loading and hydraulic retention time.     

丽江盆地地表-地下水的水化学特征及其控制因素

2008年11月～2009年10月在丽江盆地-玉龙雪山地区采集白水河、三束河、哥吉河、束河河水及流域内地下水样品,使用离子色谱法分析了样品主要阴阳离子含量,研究了岩溶地区地表及地下水体的水化学特征、季节变化及其控制因素.结果表明,研究区水体均呈现弱碱性,主要离子组成以Ca2+和HCO3-为主,分别占阳离子和阴离子总量的54.8%和92.4%;不同季节河水的离子浓度差别较大,季风期离子浓度仅为西风期离子浓度的80%左右,表明季风期丰沛的大气降水输入对河水离子特征有较为显著的影响;河水离子浓度普遍低于盆地地下水主要阴阳离子浓度;河水和地下水的无机离子浓度都呈现出从高海拔到低海拔离子含量递增的规律.碳酸盐的风化溶解作用是水体离子的主要来源,季风期降水对水体的离子特征也有一定的影响,人类活动对人类聚居区部分天然水体已造成轻度污染.     

基于PCR-TGGE技术的餐厨垃圾厌氧消化微生物群落结构解析

为了解不同负荷下单相餐厨垃圾厌氧消化反应器内微生物群落结构演替特征,在单相厌氧消化反应器负荷为2.0～8.5kg·m-·3d-1(以VS计)的不同负荷条件下取样,运用16SrDNA的PCR-TGGE技术对反应器内微生物进行动态追踪.同时,运用Dice系统和NMDS软件对PCR-TGGE图谱进行分析.结果表明,负荷为4.0～6.0kg·m-·3d-1时,微生物群落结构变化不大;负荷为6.0～7.0kg·m-·3d-1时,微生物群落结构变化较为明显;负荷分别为7.0～8.0kg·m-·3d-1及8.5kg·m-·3d-1时,微生物群落结构变化最为明显.纵观整个过程,在餐厨垃圾厌氧消化反应器有机负荷在2.0～8.5kg·m-·3d-1下厌氧反应器内的微生物群落结构存在明显的阶段性演替;负荷为7.0kg·m-·3d-1时微生物群落结构的丰富度最好.     

北方地区潜流人工湿地冬季保温措施的研究

人工湿地作为一种造价较省,运行成本低的污水处理技术,目前已经得到了广泛的应用.但是在北方地区,人工湿地受到冬季气候影响,无法正常运行,降低了它的使用效率.试验针对北方冬季低温环境下,人工湿地无法正常运行的问题,对3种不同的保温措施进行历时两年的对比试验,通过对TP、TN、NH₄⁺-N和COD等4种主要污染物和人工湿地出水水温的跟踪监测,检验了不同保温措施的效果.试验结果表明:在冬季,使用薄膜法保温措施的处理系统中, COD、TN和NH₄⁺-N的去除率分别为30%~45%、40%~60%和35%~60%,比温棚法和冰封法的出水中污染物去除率高10%~20%.TP在出水中含量波动较大,去除率为19%~70%,伴有磷释放现象,但是在薄膜保温下TP的去除效果也要好于温棚和冰封.经过SPSS 16.0分析,薄膜保温的人工湿地出水水质与冰封和温棚法相比具有显著性差异.在对人工湿地曝气槽和出水口的污水水温进行监测发现,利用薄膜保温的人工湿地出水口水温高于冰封和温棚的水温,进一步证明薄膜保温可以有效提高人工湿地内的温度,为人工湿地正常运行提供了保证.而且薄膜保温措施的操作简便、造价低,适合推广应用.     

基于SOM和多元分析的滇池沉积物污染特征空间模式研究

联合运用层次聚类分析(HCA)、判别分析(DA)和自组织映射神经网络(SOM)3种数值方法,对滇池2008—2010年17个底泥监测点位(10个常规点位及7个新增点位)9种污染物进行空间差异性和相似性分析,并评价各指标在空间的分布特征及监测点代表性.结果表明:滇池沉积物整体污染程度为草海>外海中部及南部>外海北部.As、Hg、Pb、Cd、Cu和Zn污染最严重的点位是断桥;草海中心的凯氏氮污染最严重,其他指标污染水平仅次于断桥;Cr和TP污染最严重的点位是新增点位盘龙江2;海埂是全局污染最轻的点位.现有的常规监测点位对整体污染特征的代表性较弱,建议取消异质性最低的白鱼口、观音山西、观音山东和罗家营站点;考虑污染特征和监测点位空间分布的均匀性,建议将盘龙江2、海埂和马料河设为常规监测点位.     

浅议新大气排放标准发布后火电厂竣工验收监测

2011年7月29日《火电厂大气污染物排放标准》发布后,现有火电厂的“三同时”竣工验收监测需执行新标准中的相关规定。新标准还增加了敏感点环境空气的监测,敏感点的确定可参照环评,根据实际情况布设。新标准中未明确指明“重点地区”指哪些行政区划,为此,本文建议需要在新标准中进一步明确“重点地区”指哪些省等行政区域,以利于新标准的执行。     

基于地表水源热泵尾水排放的江河热环境容量研究

运用FLUENT软件对重庆市洪崖洞水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取FLUENT中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温度梯度和温升面积。在温排水流量为4 500 m3/h、温差为6℃的条件下,得出受纳水域温升值超过1℃的水域面积约为1 600 m2,为模拟江河水域面积的2.0%。选取1℃温升值作为温升带边界控制值,在热泵系统最大负荷工况下,计算得出受纳水域的热环境容量为312.5(m.3℃)/s,剩余热环境容量为306.25(m.3℃)/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。     

钙、镁离子在水流作用下对铜绿微囊藻生长的影响

为了解在"引江济太"过程中大量钙、镁离子的引入对铜绿微囊藻生长的影响,本实验在控制温度和光照条件下,室内模拟不同钙、镁离子浓度在两个特征流速5 cm/s和15 cm/s下微囊藻的生长。实验结果表明,微囊藻藻密度随钙、镁离子浓度的增加而增加,流速在15cm/s下微囊藻最大藻密度(9 236.4×104cell/mL)是流速为5 cm/s下最大藻密度(2 873.72×104cell/mL)的3倍,流速为15 cm/s下微囊藻最大比增长速率均较5 cm/s下的高。这可能是在水流产生的剪切力作用下藻细胞胞外多糖增加,粘附更多的钙、镁离子更利于钙、镁离子迁移到胞内,同时胞外附着的钙、镁离子尤其钙离子形成桥联,使微囊藻细胞形成群体产生微环境利于微囊藻的生长。水流对微囊藻利用钙、镁离子有重要的影响,这为有效调水抑制蓝藻生长提供科学依据。     

我国钢铁生产企业氮氧化物减排形势研究

针对国家"十二五"氮氧化物减排的紧迫形势,介绍了我国钢铁企业排放氮氧化物污染现状,提出烧结工序烟气氮氧化物控制是钢铁生产企业氮氧化物减排的重点,在对相关技术优缺点进行分析的基础上,总结了存在的主要问题、困难和发展趋势,提出了钢铁行业氮氧化物减排的对策和建议,为我国氮氧化物污染控制提供支撑。