湿法烟气脱硫的腐蚀机理及防腐技术

综述了湿法烟气脱硫的腐蚀与防腐现状，分析了腐蚀环境及腐蚀机理，并概括总结了湿法烟气脱硫工艺系统中材料防腐技术和工艺防腐技术，对此法的现场实际应用有一定的指导意义。     

Sensitivity experiments and assessment of climatic changes in China induced by greenhouse effect

Climatic changes can be separated into two parts: natural changes -and human activity influenced on climatic changes. The observed data could not only show the effects caused by human activity. Several simulated results as simulated by the GCMs induced by the greenhouse effects in China .have been analysed. It is shown that an obvious warming of about 3-6℃ in winter and 2-5℃ in summer in China as simulated by the GCMs induced by doubling CO2 have been found. There are getting drier or wetter regions in China due to doubled CO2 as simulated by most of models. Comparing the simulated results with the observed data in China, some simulated results are able to be believed. The GCMs should be improved, especially in the regional areas.     

关于高校环境类专业本科教学的思考

论述了从培养目标、课程设置、教学方法与实践等方面培养高素质复合型的环境类专业的本科生，以满足社会需求，并为环境类专业本科教学改革提供参考。     

Effects of environmental factors on the production and release of matrix-bound phosphine from lake sediments

Effects of pH, temperature, and oxygen on the production and release of phosphine in eutrophic lake sediments were investigated under laboratory tests. Results indicated that the elimination of matrix-bound phosphine was accelerated under initial pH 1 or 12. Phosphine levels could reach maximum under initial pH 10. The contents of phosphine increased with the addition of alkali under pH 4–12. The rates of phosphine production and release from lake sediments varied with temperature. 20°C was the most favorable temperature for the production of matrix-bound phosphine. Oxygen showed little effect on matrix-bound phosphine. Matrix-bound phosphine concentrations in lake sediments were concluded to be dependent on a balance of natural generation and depletion processes. Translated from Acta Scientise Circumstantiae, 2005, 25(5): 681–685 [译自: 环境科学学报]     

高强铝合金超塑挤压成形

主要介绍了工业牌号高强铝合金在供应态或经简单预处理后在通用油压机上超塑成形的实例,并分析探讨了非理想组织材料超塑成形中微观组织的变化。     

厌氧升流式污泥层反应器内污泥颗粒化对固液分离效果的影响

厌氧升流式污泥层反应器在较高的COD容积负荷和水力负荷下稳定运行的关键是要有良好的固液分离,而固液分离的必要条件是污泥的沉降速度大于混合液在三相分离器的沉降区的最小断面上的向上流速。通过小型装置的试验表明,污泥的沉降速度与污泥的性状和浓度有关,使反应器内的污泥颗粒化能改善污泥沉降性、提高固液分离效果,使反应器能在相当高的COD容积负荷(20—30kgCOD/m~3·d)和水力负荷(0.8m~3/m~2·h)下稳定运行。本文叙述了厌氧升流式污泥层反应器内的污泥颗粒化过程,并简要地讨论了培养颗粒污泥的基本条件。     

小边距冲孔模的凹模设计

在五金、家电、办公用品等行业中,常存在一些零件需要先弯曲成形,再进行冲孔。由于结构设计要求,有些孔到弯曲边的距离尺寸较小,尺寸精度要求较高,因此在这类模具设计中,凹模的强度问题较为突出。从结构设计和工艺设计两方面给出了设计这种模具的一些心得体会。     

故障安全控制系统在催化裂化装置的应用

介绍霍尼韦尔公司故障安全控制系统FSC的技术特点以及在我厂重油催化裂化装置的应用情况，说明了该装置故障安全控制系统组成和操作界面，并总结了应用效果。     

Life cycle analysis and choice of natural gas-based automotive alternative fuels in Chongqing Municipality,China

Road transport produces significant amounts of emissions by using crude oil as the primary energy source. A reduction of emissions can be achieved by implementing alternative fuel chains. The objective of this study is to carry out an economic, environmental and energy (EEE) life cycle study on natural gas-based automotive fuels with conventional gasoline in an abundant region of China. A set of indices of four fuels/vehicle systems on the basis of life cycle are assessed in terms of impact of EEE, in which natural gas produces compressed natural gas (CNG), methanol, dimethylether (DME) and Fischer Tropsch diesel (FTD). The study included fuel production, vehicle production, vehicle operation, infrastructure and vehicle end of life as a system for each fuel/vehicle system. A generic gasoline fueled car is used as a baseline. Data have been reviewed and modified based on the best knowledge available to Chongqing local sources. Results indicated that when we could not change electric and hydrogen fuel cell vehicles into commercial vehicles on a large scale, direct use of CNG in a dedicated or bi-fuel vehicle is an economical choice for the region which is most energy efficient and more environmental friendly. The study can be used to support decisions on how natural gas resources can best be utilized as a fuel/energy resource for automobiles, and what issues need to be resolved in Chongqing. The models and approaches for this study can be applied to other regions of China as long as all the assumptions are well defined and modified to find a substitute automotive energy source and establish an energy policy in a specific region.     

水污染造成的环境经济损失分析

立足于我国水资源现状，对造成水污染损失的主要影响因素进行分析。探讨适合于我国国情的水污染损失的计算方法。以南方某市为例，计算该市水污染损失，得到了一些有益的结论．给政府部门提供了一个较为准确的损失数据。通过政府的干预或经济法律手段，加大水资源保护管理工作的力度。