Diopside-based glass-ceramics from MSW fly ash and bottom ash

By utilising MSW fly ash from the Shanghai Yuqiao municipal solid waste (MSW) incineration plant as the main raw material, diopside-based glass-ceramics were successfully synthesized in the laboratory by combining SiO(2), MgO and Al(2)O(3) or bottom ash as conditioner of the chemical compositions and TiO(2) as the nucleation agent. The optimum procedure for the glass-ceramics is as follows: melting at 1500 degrees C for 30 min, nucleating at 730 degrees C for 90 min, and crystallization at 880 degrees C for 10h. It has been shown that the diopside-based glass-ceramics made from MSW fly ash have a strong fixing capacity for heavy metals such as lead (Pb), chromium (Cr), cadmium (Cd) etc.     

Alteration of dominant cyanobacteria in different bloom periods caused by abiotic factors and species interactions

Freshwater cyanobacterial blooms have drawn public attention because they threaten the safety of water resources and human health worldwide. Heavy cyanobacterial blooms outbreak in Lake Taihu in summer annually and vanish in other months. To find out the factors impacting the cyanobacterial blooms, the present study measured the physicochemical parameters of water and investigated the composition of microbial community using the 16S rRNA gene and internal transcribed spacer amplicon sequencing in the months with or without bloom. The most interesting finding is that two major cyanobacteria, Planktothrix and Microcystis, dramatically alternated during a cyanobacterial bloom in 2016, which is less mentioned in previous studies. When the temperature of the water began increasing in July, Planktothrix appeared first and showed as a superior competitor for M. aeruginosa in NO₃^?-rich conditions. Microcystis became the dominant genus when the water temperature increased further in August. Laboratory experiments confirmed the influence of temperature and the total dissolved nitrogen (TDN) form on the growth of Planktothrix and Microcystis in a co-culture system. Besides, species interactions between cyanobacteria and non-cyanobacterial microorganisms, especially the prokaryotes, also played a key role in the alteration of Planktothrix and Microcystis. The present study exhibited the alteration of two dominant cyanobacteria in the different bloom periods caused by the temperature, TDN forms as well as the species interactions. These results helped the better understanding of cyanobacterial blooms and the factors which contribute to them.     

太湖流域典型城镇水环境芳香胺类污染特征

利用固相萃取-气相色谱/串联质谱法(SPE-GC-MS/MS),对太湖流域上游城镇常州武南地区的地表水体和典型排放源中的4种芳香胺类污染物(AAs)进行连续2年监测,综合分析了2018～2019年间AAs的污染及浓度特征.结果表明,武南地区河网中目标AAs的总浓度范围为相似文献   

基于聚类方法下的柴油车排放颗粒物无机元素谱分析

近年来在大气污染的防治工作中,柴油车污染防治的重要性日渐凸显.本文通过测试和文献检索等方法收集了97组与柴油车排放颗粒物无机元素排放有关的数据,采用k-means均值聚类分析的方法对数据进行分类并对分类结果进行分析,得出柴油车无机元素排放占颗粒物比例的大致区间为:Si(0—4.62%)、Al(0—1.53%)、Ca(0—4.09%)、Na(0—2.61%)、Mg(0—2.68%)、K(0—0.85%)、Fe(0—3.4%)、Zn(0—0.54%)、Cu(0—1.49%)、Ni(0—0.06%),且所得无机元素的排放区间的置信水平均大于94%.同时得到的柴油车排放颗粒物无机元素分析结果,可以为后续柴油车排放颗粒物无机元素数据分析以及相关污染治理提供参考,进而促进我国大气环境质量的改善、更好地保障人们身体健康.     

UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

宜兴市典型道路灰尘(＜150 μm)组分中重金属污染特征及风险评价

粒径小于150μm道路灰尘是生态系统及人类健康风险的主要来源.本文于2016年11月采集宜兴市主城区10条典型交通道路灰尘样品,分析并评价150μm灰尘颗粒中Zn、Cu、Pb、Ni和Cr等5种重金属污染及风险水平.研究结果表明,宜兴市道路灰尘中重金属含量均高于当地土壤背景值,平均含量(mg·kg~(-1))大小依次为:Zn(408.2±108.0)Pb(263.3±582.4)Cr(161.7±77.1)Cu(128.0±43.4)Ni(90.2±32.4).地累积指数(I_(geo))表明,道路灰尘中重金属Zn和Cu为中-中/重度污染水平,Pb表现为中度污染水平,Ni和Cr则表现为无污染/中-中度污染水平.潜在生态风险指数(RI)表明,研究区域(宜兴市)大部分道路的灰尘中重金属对当地生态系统造成潜在中度风险,重金属Cu、Cr和Pb为潜在生态风险主要来源(85%).健康风险评价表明,道路灰尘中非致癌重金属对儿童可能构成潜在非致癌风险,对成人不造成非致癌伤害, Ni和Cr对暴露人群不会造成严重致癌危害.研究同时发现,宜兴市道路灰尘中重金属污染程度严重,亟需采取有效措施加以控制.     

交联剂TAIC反应风险评估分析

利用全自动反应量热仪和绝热加速量热仪等相关实验仪器检测出TAIC(三烯丙基异氰尿酸酯)合成反应的反应热、比热容及热稳定性等数据,依据绝热温升、工艺温度、技术最高温度、最大反应速率到达时间及失控体系可能达到的最高温度这5个温度参数按照评估标准从分解热、严重度、可能性、矩阵、工艺危险度这5个方面分别进行评估。通过对热参数及实验过程进行分析提出降低工艺危险等级的工艺优化方法。根据最终评估结果对TAIC生产装置的安全性进行评价,提出相应的整改措施及建议。