强化混凝去除黄浦江水有机物的试验研究

强化混凝去除有机物的效果与水源的分子量分布特性有着密切的关系.由于黄浦江水中低分子量的溶解性有机物占多数,因此,强化混凝处理有机物效果有限.对于＜1k分子量区间的有机物.增加混凝剂投量可有效去除紫外吸光值(UV254),但去除溶解性有机碳(DOC)的效果很差.尽管增加混凝剂投量和降低pH都能有效地去除有机物,但决定强化混凝效果的主要因素是pH,去除黄浦江水有机物的最佳pH范围为6～5.     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

研究单位压边力值对板料成形性能的影响

主要介绍板料在拉深成形过程中单位压边力值对板料成形性能的影响。研究方法采用仿真技术 ,指出板料在成形过程中如按最初设定的单位压边力值进行成形 ,那么 ,板料成形过程中单位压边力值将逐渐增大 ,严重影响板料成形极限。如果采用控制板料在成形过程中压边圈下坯料的单位压边力值 ,将提高板料成形极限。其结论为生产现场提高板料成形性能和表面质量提供了一种可实施的方法。     

深圳:向"雨洪"要水

“到2020年，深圳本地水资源可供水量占总供水量的比重将由目前的27％提高到45％，新增雨洪资源利用量达4．9亿立方米。”这是不久前通过专家鉴定的《深圳雨洪资源利用规划研究》（以下简称规划）提出的目标。     

高锰酸盐指数测定中校正系数K值的变化验证

运用数理统计方法,验证了高锰酸盐指数测定的校正系数K值在4～5h内不会随时间和水样的变化而变化,K值不必每个样品都测定。     

几种重金属对紫背萍过氧化氢酶活性的影响

通过测定被暴露植物分解过氧化氢后放出氧气的体积，确定紫背萍过氧化氢酶（ＣＡＴ）的活性。结果表明，紫背萍暴露在Ｈｇ、Ｐｂ、Ｃｒ、Ｎｉ、Ｆｅ的溶液中，其ＣＡＴ活性除在Ｐｂ作用下明显降低外，在其它４种重金属的作用下都有不同程度的升高。这表明Ｐｂ对紫背萍 ＣＡＴ活性有抑制作用，而其它４种重金属对紫背萍ＣＡＴ均有刺激作用。紫背萍对５种重金属所表现出来的这种生态效应，是重金属水污染的植物潜在效应，植物的ＣＡＴ     

生物氧化塔的应用

介绍了生物氧化培处理含油污水的装置运行情况．大量数据说明该塔具有操作弹性大，适用范围广，能耗低，脱除率高，不外排过剩的活性污泥等特点，具有广阔的推广应用前景。     

运用生物循环理论建立多元生物污水处理新工艺

以活性污泥法为主流工艺的现代污水处理技术,存在着工程投资大，运行费用高，管理复杂等缺点，按照生物循环基本理论要示是不完善的。多元生物污水处理是按照食物链代谢规律,运有生物循环理论，设计成微生物－植物－水生动物3个处理单元。污水中的有机物作为微生物人良料在第1单元被套氧微生物消化降解成CO2，H2O，NH^ 4,CH^-4等，除CH4作为生物能源可回收利用外，其它物质是植物的营养物质，在第2单元藻类等多种植物吸收，通过光合作用合成植物细胞，并释放氧气，在第1单元和第2单元增殖的细胞和藻类成为水生动物的食料，在第3单元被浮游动物和鱼类捕食，转化成动物蛋白，污水中的有机物在3个单元组成的生态净化系统中，被多样生物逐级利用，最终转化成植物细胞和动物蛋白，使污水得到净化，达到三级处理水平，不产生二次污 ，是一种安全的，对环境友好的污水处理新技术，在国外被誉为21世纪的新科技。该污水净化系统，按照生物循环基本理论进行工艺设计，通过生态平衡自我调控，具有工艺流程简单，投资省，运行费用低，管理简便等优点，适合我国国情，有广阔的应用前景，尤其适有于小城镇污水处理。     

Optimizing the atmospheric sampling sites using fuzzy mathematic methods

A new approach applying fuzzy mathematic theorems, including the Primary Matrix Element Theorem and the Fisher Classification Method, was established to solve the optimization problem of atmospheric environmental sampling sites. According to its basis, an application in the optimization of sampling sites in the atmospheric environmental monitoring was discussed. The method was proven to be suitable and effective. The results were admitted and applied by the Environmental Protection Bureau (EPB) of many cities of China. A set of computer software of this approach was also comuletelv comniled and used.     

含铅,无铅汽油车尾气排出物遗传毒性比较

利用台架试验模拟汽车行驶工况，收集了发动机使用无铅汽油，含铅汽油燃烧后的尾气颗粒物，对其中吸附的有机物进行了提取，并以Ａｍｅｓ试验，中国仓鼠肺细胞体外微核实验等方法，从基因，染色体水平检测了两种颗粒提取的遗传毒性。