Short-term effects of hydrogen fluoride on Nicotiana tabacum L

Data on the short-term effects of fumigation with hydrogen fluoride (HF) on the response behavior of the Nicotiana tabacum L. cv. St. Karabalar 6265 are being presented. Growth rate, fluoride accumulation in leaves and soils, and degradation in chlorophyll and nicotine contents of the plant species against the variations in two experimental factors, namely the exposure concentration and exposure time parameters, were investigated. Resulting data reveals that the variety selected for this study is not so tolerant to fluoride as generally reported in the literature, if only the individual effects of the pollutant is considered.     

Air pollution modelling in Erzurum city

Various techniques have been applied to air pollution modelling. In this study, a model was developed by applying a continuity equation to the air control volume over Erzurum city centre. Model parameters were calculated by regression analysis, using SO2 and particle concentrations taken in 1989-1990 and 1990-1991 winter seasons. Multiple correlation coefficients, R2, for all analyses were of the same order of 97%. According to this model, daily polluting concentrations are not only influenced by daily meterological parameters but also by the values of previous days. The proposed model allows estimation of daily polluting concentrations by means of meteorological data.     

耗散结构理论在矿井通风系统优化中的应用

利用耗散结构理论，以系统的影响参数作为切入点，对矿井通风系统的形成过程、系统平衡等进行描述，据此得出了一些探讨性结沦，这些有助于矿井通风系统优化与控制的计算机模拟。     

Biosynthesis and Characterization of Laccase Catalyzed Poly(Catechol)

Enzymatic polymerization of catechol was conducted batch-wise using laccase enzyme produced by the culture Trametes versicolor (ATCC 200801). The polymerization reaction was carried out in 1:1 (v/v) aqueous-acetone solution, buffered at pH 5.0 with sodium acetate (50 mM) in a sealed, temperature-controlled reactor at 25°C. The molecular weight of the produced polymer was determined with GPC. FT-IR, DSC, and TGA were employed to investigate the structure and thermal behavior of synthesized poly(catechol). It was found that catechol units were linked together with ether bonds and thermal stability of the catechol increased in the poly(catechol) polymeric structure effectively. The number average molecular weight of poly(catechol) was found as 813 ± 3 Da with a very narrow polydispersity value of 1.17 showing selective polymerization of catechol by the enzyme.     

The effects of alginate microspheres on phytoremediation and growth of Lemna minor in the presence of Cd

Today, the removal of increased amount of contaminant concentrations in nature such as metals, nanoparticles, has become an essential issue to struggle with. In this paper, both the toxic effects of non-essential Cd on Lemna minor in presence of alginate microspheres and metal removal capacity of Cd-exposed L. minor and microspheres were investigated. Three test groups were constructed: group (L) containing Lemna, group (M) containing alginate microsphere and group (L?+?M) containing alginate microsphere and Lemna. Five different levels of Cd concentrations were added into these groups. Estimation models were constructed to estimate Cd removal capacities of L. minor and microspheres, and time-concentration-dependent growth (GRC) rates of both microsphere-containing and non-containing groups were modelled by regression analysis. It was seen that microspheres alone only had no positive or negative effects on Lemna growth. It was observed that, for all test groups the time-dependent growth rate has both increase–decrease trends in general. The toxicity effect of Cd on Lemna growth was reduced by adding microspheres into medium. Furthermore, the results stated that test groups containing only microspheres (M, 0–97.56%) and consortium groups (M?+?L, 0–98.26%) were slightly more successful in Cd removal process compared to Lemna (L) groups (L, 0–97.32%).     

Sulphur-oxidising bacteria isolated from deep caves improve the removal of arsenic from contaminated harbour sediments

Acidophilic S-oxidising bacteria isolated from sulphur-rich deep caves (Frasassi, Italy), characterised by relatively low temperature, were tested for their ability to mobilise (semi-)metals from contaminated sediments. Sediment samples from two commercial Italian seaports were used to set up bioleaching experiments. The effect of different growth substrates was also investigated. Our experiments revealed that S-oxidising bacteria isolated from Frasassi caves have a high potential to remove As from contaminated marine sediments, as never reported before. Although As solubilisation efficiency was quite low (i.e. about 30%), only a small amount of As was associated with non-residual fractions of the sediment. On the contrary, the solubilisation efficiencies of Zn and Ni (20% and 10%, respectively) were lower than those previously obtained by the use of other acidophilic bacteria and mainly influenced by the experimental conditions rather than by the presence of the S-oxidising bacteria. Results presented here open new perspectives in bioleaching applications for the remediation of contaminated sediments. Indeed, microbial strains adapted to relatively low-temperature environments could improve sediment bioleaching at temperature regimes where mesophilic and thermophilic strains are not favoured. Such strains could be exploited for developing selective bioremediation procedures for sediments contaminated with As, to be applied in multistep biotreatment processes.     

载体制备方法对贵金属催化剂Ru/ZrO2催化湿式氧化性能的影响

蒸煮处理水合氢氧化锆制备了ZrO20A;将水合氢氧化锆静置过夜制得ZrO2-B;以此两种载体通过初湿浸渍法制得Ru／ZrO2催化剂．在BET测试中,ZrO2-A载体及其相应催化剂的比表面积远高于ZrO2-B载体及相应催化剂．TPR表明Ru／ZrO2-A中Ru的分散性更好,金属与载体的相互作用更为紧密．以苯酚和乙酸水溶液为模拟废水进行催化剂的评价,结果表明,Ru／ZrO2-A无论是在反应活性还是稳定性上均优于Ru／ZrO2-B．     

微波消解-原子吸收光度法测定堆肥中微量镉、锌和铜

研究并确定了微波消解堆肥的最佳条件,应用原子吸收与数据导数处理系统相结合方法解决了堆肥体系中微量金属Cd.Zn和Cu的测定问题,对应元素的灵敏度可提高一个数量级.检出限均有不同程度的降低,从而极大提高分析的准确度.同时对堆肥实际样品进行加标回收实验,测定了堆肥样品中金属的回收率,其回收率分别在99.5%-102.0%、98.7%-99.1%和98.8%-104.0%之间.实验结果显示,该方法快速、准确、可信.     

Heavy metal pollution in surface sediment and mussel samples in the Gulf of Gemlik

Different sources of pollution in Karasu Creek were investigated to obtain the water quality and ratio of contamination in this region. To achieve the main objectives of the present study, water samples were collected from Karasu Creek, starting from flow pattern at the upstream site of Akkaya Dam to the end of the dam, crossing the place where the Creek drains into. Dissolved oxygen, electrical conductivity, temperature and maximum/minimum pH were measured systematically for 12 months in the stations, where the water samples were collected. Chemical analyses of the water samples were carried out by using Cadas 50 S brand UV spectrometer to find out the Pb, Fe, Cu, Zn, Ni, Cr, Cd, S, F and Cn concentrations. These concentration were determined in μg/lt as 80–850; 180–4,920; 10–6,100; 440–25,530; 130–2,400; 120–280; 20–150; 214,250–1,113,580; 1,560–4,270 and 40–690, respectively. To determine metal levels of the water samples, multivariate analyses (element coefficient correlation, coefficient correlation dendrogram, hierarchical cluster analysis dendrogram, model summary and ANOVA) were used. The analyses yielded highly accurate results. There were positive correlations between some elements and their possible sources were the same. The stations which resembled each other along the creek were divided into three groups. The water quality of the creek was low and had toxic qualities. Eutrophication developed in Akkaya Dam along the creek. The source of pollution was thought to be industrial and residential wastes. Absolute (0–100 m), short distance (100–500 m) and medium distance (500–2,000 m) conservation areas should be determined in pollution areas along Karasu Creek and they should be improved.     

Concentrations of Cr, Cd, Cu, Zn and Fe in crab Charybdis longicollis and shrimp Penaeus semisulcatus from the Iskenderun Bay, Turkey

Copper, chromium cadmium, iron and zinc concentrations were determined in marine crab Charybdis longicollis and marine shrimp Penaeus semisulcatus in order to assess the impact of industrial activities and the sinking of M/V Ulla ship. Liver, gill and muscle sample solutions prepared analyzed using the atomic absorption spectrophotometry technique. The order of the metal concentrations found in muscle of crab was: Cu>Cr>Fe>Zn>Cd, while in muscle of shrimp the order was different: Cr>Cu>Zn>Fe>Cd. The highest Cu, Cr, Cd, Fe and Zn concentrations were found in the liver, and this was followed by the gill and muscle in both species. The levels of all metals in a given tissue were always higher in C. longicollis than in P. semisulcatus. Metals in both species show seasonal variations. In both species the highest concentrations were detected for all metals in summer.