Space industrialization

Environmental Chemistry Letters -     

交联阳离子淀粉螯合剂对铬渣的处理研究

合成了作为重金属螯合剂的交联阳离子淀粉 ,并将它用于铬渣的固化实验 ,对固化体的浸出毒性、表面浸出率、抗压强度等指标进行了测试。结果表明 ,添加高分子螯合剂后的固化体的浸出毒性降低 6 6 4 % ,远远小于国家标准的1 5mg/L ;2 8d后的表面浸出率仅为 1 0 -6数量级 ;抗压强度有所下降 ,但 2 8d养护后的抗压强度大于 30MPa ,符合填埋或建筑综合利用的强度要求     

海南"美丽乡村"环境协同治理状况调研:政策工具的视角

"美丽乡村"是"美丽中国"的重要载体和组成部分。实现"美丽乡村"的生态环境治理需要政府、社会、村民的多方协同治理,政策工具的选取、组合、使用,决定了协同模式的构建。本调研基于政策工具的视角考察海南"美丽乡村"环境协同治理状况,根据所得数据科学研究分析,科学合理地提出相应的建议对策,以期为海南"美丽乡村"环境协同治理提供实证借鉴。     

Determinants of homeowners' attitudes to the installation of high-voltage overhead transmission lines

This article deals comprehensively with factors which influence attitudes to the placement of high-voltage overhead transmission lines (HVOTLs). It employs an analytical schema which links the initial stimulus of the power lines' proposal in an area to Background and Socio-economic independent variables and a set of mediating variables. From a survey of 600 residents in three different domiciliary settings in Queensland, Australia, results indicate an absence of positive attitudes and, at best, neutral ones to HVOTL placement. By multinomial logistic regression, the study probes the grounds behind negativity and extreme negativity, uncovering direct links between these attitudes and certain of the variables included in the analytical schema.     

Chemometric approach to evaluate element distribution in muscle,liver and fish bone of roach (Rutilus rutilus), silver bream (Blicca bjoerkna) and crucian carp (Carassius carassius) from Swarzędzkie Lake (Poland) using ICP-MS and FIAS-CVAAS techniques

The content of elements in fish tissues and organs from Swarz?dzkie Lake was investigated in order to evaluate the possible risk associated with their consumption by animals as well as humans. Samples of muscle, liver and fish bone of three fish species; roach (Rutilus rutilus), silver bream (Blicca bjoerkna) and crucian carp (Carassius carassius) were collected from seine catches undertaken as part of the biomanipulation of Swarz?dzkie Lake. Element concentration (Al, As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Zn) was determined by inductively coupled plasma mass spectrometry (ICP-MS), with the exception of Hg where the flow injection analysis system cold vapour atomic absorption spectrometry (FIAS-CVAAS) was applied. The study indicated a large variation in the occurrence of the investigated elements in different parts of the fish body. The highest content of Al and Zn was stated in all fish organs for each fish species. The majority of the applied statistical and chemometric methods (e.g., PCA, CA) refer to roach since we had a large number of data for this species. The obtained results were assessed in terms of their accuracy and precision using certified reference material of Fish Muscle ERM BB422.     

Effects of 4-methylbenzylidene camphor (4-MBC) on neuronal and muscular development in zebrafish (<Emphasis Type="Italic">Danio rerio</Emphasis>) embryos

The negative effects of overexposure to ultraviolet (UV) radiation in humans, including sunburn and light-induced cellular injury, are of increasing public concern. 4-Methylbenzylidene camphor (4-MBC), an organic chemical UV filter, is an active ingredient in sunscreen products. To date, little information is available about its neurotoxicity during early vertebrate development. Zebrafish embryos were exposed to various concentrations of 4-MBC in embryo medium for 3 days. In this study, a high concentration of 4-MBC, which is not being expected at the current environmental concentrations in the environment, was used for the purpose of phenotypic screening. Embryos exposed to 15 μM of 4-MBC displayed abnormal axial curvature and exhibited impaired motility. Exposure effects were found to be greatest during the segmentation period, when somite formation and innervation occur. Immunostaining of the muscle and axon markers F59, znp1, and zn5 revealed that 4-MBC exposure leads to a disorganized pattern of slow muscle fibers and axon pathfinding errors during the innervation of both primary and secondary motor neurons. Our results also showed reduction in AChE activity upon 4-MBC exposure both in vivo in the embryos (15 μM) and in vitro in mammalian Neuro-2A cells (0.1 μM), providing a possible mechanism for 4-MBC-induced muscular and neuronal defects. Taken together, our results have shown that 4-MBC is a teratogen and influences muscular and neuronal development, which may result in developmental defects.     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.     

Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.     

Design and characterization of human exposure to generated sulfate and soot particles in a pilot chamber study

A number of literatures have documented adverse health effects of exposure to fine particulate matter (PM_2.5), and secondary sulfate aerosol and black carbon may contribute to health impacts of PM_2.5 exposure. We designed an exposure system to generate sulfate and traffic soot particles, and assessed the feasibility of using it for human exposure assessment in a pilot human exposure study. In the designed exposure system, average mass concentrations of generated sulfate and soot particles were 74.19μg/m³ and 11.54μg/m³ in the chamber and did not vary significantly during two-hour human exposure sessions. The size ranges of generated sulfate were largely between 20 to 200 nm, whereas those of generated soot particles were in the size ranges of 50 to 200nm. Following two-hour exposure to generated sulfate and soot particles, we observed significant increases in fractional exhaled NO (FeNO) in young and health subjects. Building on established human exposure system and health response follow-up methods, future full-scale studies focusing on the effects of mixed particulates and individual PM_2.5 components would provide data in understanding the underpinning cardio-respiratory outcomes in relation to air pollution mixture exposure.

Implications: Controlled exposure is a useful design to measure the biological responses repeatedly following particulate exposures of target components and set exposure at target levels of health concerns. Our study provides rational and establishes method for future full-scale studies to focus on examining the effects of mixed particulates and individual PM_2.5 components.     

介孔铁锆复合氧化物的制备及其对Cr(Ⅵ)的吸附性能

以十六烷基三甲基溴化铵(CTAB)为模板剂,以铁(Fe)和锆(Zr)为原料,采用不同Fe/Zr摩尔比例,制备出Fe/Zr复合氧化物吸附剂,对吸附剂的比表面积、孔径分布、晶型结构和零点电位(PH2pc)进行了表征.筛选吸附容量最佳的Fe/Zr吸附剂,考察了吸附条件对其去除水中Cr(Ⅵ)效果的影响,探讨了吸附动力学和等温线规律.结果表明:最佳吸附剂的Fe/Zr摩尔比为5/1,具有典型的介孔材料结构特征;该吸附剂在pH为2～8范围内均有良好的除Cr(Ⅵ)效率;30min内即可达到吸附平衡,最大吸附容量为60.90 mg/g.介孔Fe/Zr复合氧化物与现有除Cr(Ⅵ)吸附剂相比具有更高的吸附能力,是一种具有较好应用潜力的水处理除Cr(Ⅵ)吸附剂.