造成机械伤害的原因及预防

日常工作中,由于机械伤害常常给人造成痛苦,甚至终身残疾。怎样才能有效地防止机械伤害事故呢?首先要正确分析产生机械伤害事故的原因,然后采取相应的安全防范措施。形成机械伤害事故的原因: 1.修理、检查机械时,忽视安全措施。在线检修时,未采取必要的预防措施;断电作业,电源处未悬挂警示牌。 2.安全防护装置不健全或形同虚设。 3.电源布局混乱,不利于紧急停车。 4.违章作业,随便进入危险作业区。 5.不熟悉操作规程,遇有紧急情况发生判断错误。     

安全生产法制化的里程碑--论《安全生产法》的立法必要性及其意义

全面深入地宣传贯彻《安全生产法》是今后一个时期的重要工作。石少华同志是《安全生产法》起草工作小组副组长参与了该法的主要起草工作。应本社之邀,从本期开始他将就《安全生产法》的立法宗旨、法律地位、基本方针、基本原则、基本法律制度、生产经营单位主要负责人的安全责任、安全生产责任制、安全投入、工伤保险、安全中介服务、事故应急救援、监督管理、法律责任等问题陆续撰文,以飨读者。     

国内外大城市防灾减灾管理模式的比较研究

城市综合防灾减灾管理是城市管理的一个重要组成部分。上海综合减灾体系目前尚不够完善，城市抗灾能力仍较薄弱。本文通过对国外大城市减灾管理模式的比较和研究，分析了目前上海市减灾管理模式的现状和问题，提出了改进目前上海市灾害管理模式的措施建议。     

喀斯特石山地区社会经济与生态环境可持续发展系统研究:以桂西北为例

本建立了广西西北部喀斯特石山地区可持续发展的系统动力学模型。并用DYNAMO程序预测了未来20年桂西北地区的人口、工业、农业、第三产业，生态环境，土地资源，社会总产值，人均国民收人等的动态变化趋势，结果显示，该地区由于人口，工业资产增加使物质和能源消耗增长太快，而对污染治理的投入又太少，导致桂西北地区的生存环境质量下降，因此应当加大对污染治理的投入力度，改善区域环境质量，这是实现息烽县区域可持续发展的关键，根据区域特点探讨了桂西北喀斯特贫困山区的形成演化，提出了可持续发展的途径。     

四川盆地森林覆盖率自然影响因素分析

本文对四川盆地森林覆盖率的影响因素进行逐步回归分析,结果表明影响森林覆盖率的自然因素是综合的,它包括气候、地貌、土壤等自然条件。其中以7月降水量、地形崎岖度、山地比例、酸性紫色土比例及土地垦殖系数等作为决定四川森林覆盖率变化的最重要因素,这5个因素即可解释盆地森林覆盖率80%以上的变化。     

防旱抗旱能力综合评价方法：—以关中地区为例

本文采用11项指标并确定相应的评分标准和权重分配,对关中地区进行防旱抗旱能力的综合评价,得出关中地区属中等抗旱能力区。由于经济发展需水超过供水能力,现状及本世纪末缺水率将超过20％。因而跨流域引水是今后长期供水的途径。     

灰关联分析在故障树诊断中的应用

介绍一种灰色诊断法。在故障诊断模式识别中,运用灰关联分析,依据故障树的底事件重要度,通过关联度计算及排序,对故障树分析中,各种故障模式发生的可能性大小作出了准确的判断,从而为处理事故的先后、缓急提供了依据。     

新建水库初期磷氮变化的动态模拟研究

本文首先建立磷氮时空分布模型并确定模型参数的率定方法。文章模拟了新建清平水库建库初期磷氮变化情况,得出由不稳定到稳定的过程。水库磷氮时空变化的模拟结果表明,空间分布是从库尾到大坝浓度逐渐递砬,时间分布是一年中Ｐ,Ｎ浓度七月份最高,年初年末最低,其分布央线类似高斯分布。     

Air bag effectiveness as function of impact speed

An investigation was conducted to estimate the effectiveness of air bags as a function of velocity. The study consisted of three parts: a theoretical idealization, an analysis of National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), and a reanalysis of previously published Fatality Analysis Reporting System (FARS) data. The theoretical analysis looked at idealized risk curves as a function of velocity; assuming that the air bag offers a benefit for both belted and unbelted occupants. Analysis of the NASS/CDS data looked at the effectiveness of air bags as a function of velocity for Maximum Abbreviated Injury Scale (MAIS) 3+ injuries. The reanalysis of the previously published FARS data looked at the effectiveness of the air bag as a function of velocity for fatalities. The theoretical analysis indicates that the air bag effectiveness should be greatest at the low velocities. The field data analysis of both NASS/CDS and FARS were consistent with the theoretical analysis, indicating that air bags are most effective at the lower velocities, below 40 kph (25 mph), for both belted and unbelted occupants. Although it was not possible to estimate a different effect for belted and unbelted for fatalities using FARS, it was possible for MAIS 3+ using NASS/CDS. For unbelted occupants the effectiveness goes to zero or becomes negative above 40 kph (25 mph) for MAIS 3+, and for belted occupants the effectiveness stays positive but with significantly lower magnitude for speeds above 40 kph (25 mph).     

Hydrogen sulfide effects on ammonia removal by a biofilter seeded with earthworm casts

Ammonia (NH3) removal efficencies were evaluated when hydrogen sulfide (H2S) and NH3 in binary mixture gases were supplied to a ceramic biofilter seeded with earthworm (Lumbricus terrestris) casts. The effect of inlet H2S concentration and space velocity (SV) on the removal of NH3 was investigated after the acclimation of the biofilter with NH3 gas. When NH3 was singly supplied to the biofilter, NH3 removal was maintained at almost 100% until inlet NH3 concentration was increased up to 600 microL L(-1) and SV up to 330 h(-1), at which the elimination capacity of NH3 was 148 g N m(-3) h(-1). When H2S was supplied simultaneously, however, the accumulation of toxic sulfide ions showed dual effects on NH3 removal efficiencies. First, no effects were observed at inlet H2S loading below 60 g S m(-3) h(-1); however, inhibition by H2S at higher loading was observed above 60 g S m(-3) h(-1). The point at which loading achieved a maximum of more than 99% NH3 removal efficiency was 139 g N m(-3) h(-1), when inlet H2S concentration was held under 100 microL L(-1), but it dropped to 76 and 30 g N m(-3) h(-1) when the inlet H2S concentration increased to 220 and 460 microL L(-1), respectively. The critical points of inlet H2S loading that guaranteed over 99% NH3 removal were determined as 100, 100, 60, and 40 g S m(-3) h(-1) at inlet NH3 concentrations of 100, 200, 400, and 600 microL L(-1), respectively. Inlet NH3 loading had synergic effects of increasing the inhibition of inlet H2S loading on the NH3 removability of the biofilter.