Removal kinetics of phosphorus from synthetic wastewater using basic oxygen furnace slag

Removal kinetics of phosphorus through use of basic oxygen furnace slag(BOF-slag)was investigated through batch experiments. Effects of several parameters such as initial phosphorus concentration, temperature, BOF-slag size, initial p H, and BOF-slag dosage on phosphorus removal kinetics were measured in detail. It was demonstrated that the removal process of phosphorus through BOF-slag followed pseudo-first-order reaction kinetics. The apparent rate constant(kobs) significantly decreased with increasing initial phosphorus concentration, BOF-slag size, and initial p H, whereas it exhibited an opposite trend with increasing reaction temperature and BOF-slag dosage.A linear dependence of kobson total removed phosphorus(TRP) was established with kobs=(3.51 ± 0.11) × 10- 4× TRP. Finally, it was suggested that the Langmuir–Rideal(L–R)or Langmuir–Hinshelwood(L–H) mechanism may be used to describe the removal process of phosphorus using BOF-slag.     

微电解+Fenton氧化+二级A/O组合工艺处理农药杀菌剂废水

杀菌剂生产废水含有大量三环唑、无机盐、高毒性物质和难生物降解有机物,对生化细菌有较强的抑制和毒害作用,且BOD5/COD值较小,采用传统生化处理工艺无法进行。现采用微电解、Fenton氧化和二级A/O组合工艺建成的废水处理工程,运行良好,出水各项指标达到环太湖流域排放标准DB 32/1072—2007。     

东江上游（河源段）水环境研究

东江是珠江水系的主要干流之一，是广东东部至关重要的水系，文章详细分析了东江上游９０年代中后期的水质状况，在此基础上研究和探讨了东江上游水质的季节变化规律及其水质变化趋势。     

洱海地面水环境监测优化布点研究

根据１９８７年以后五年洱海水质监测数据的数理统计分析，选择污染指数大的ｐＨ、ＣＯＤ＿（Ｍｎ）、ＢＯＤ＿５、Ｔ－Ｎ、Ｔ－Ｐ进行单项方差分析，进而再进行灰色关联聚类分析和年际相关分析，确知洱海三个水质监测断面可归于一类。考虑水下地形、湖流、环湖工农业布局，水质监测点优化为两个即可保证其准确性、可控性和代表性。     

生物法合成纳米铁的研究进展

纳米铁颗粒的制备技术发展迅速,方法多种多样。生物法因其具有原料来源广,反应条件温和,产物纳米级颗粒不易团聚,以及有毒副产物少等特点,成为学者们争相研究的对象。对近几年国内外采用微生物、植物提取物等合成纳米铁材料的方法及机理进行了阐述,综述了纳米铁在环保领域的应用,并对今后深入研究生物法合成纳米铁的前景进行了展望。     

“污泥+生物质”混合厌氧消化分类管理研究

污泥单独厌氧消化困难,产气量低,能量回收价值低.但“污泥+生物质”混合厌氧消化能够改善物料间的营养平衡,运行更平稳,既有效处理污泥,又能够提高甲烷产气量,更适合生产实际,符合行业发展趋势.分析了安阳市四家污水处理厂脱水污泥的重金属含量,依据土地利用限值标准,结合生产实际,把安阳市四个污水处理厂脱水污泥分类,分类混合厌氧消化处理后分类土地利用,既提高了污泥的土地利用,更强化了污泥土地利用的重金属管理.     

京津冀及周边地区“2+26”城市空气质量特征及其影响因素

京津冀及周边地区“2+26”城市为京津冀大气污染传输通道城市,也是我国空气污染最严重的区域之一.针对京津冀及周边地区“2+26”城市,利用中国环境监测总站公布的PM_2.5、PM₁₀、SO₂、NO₂、O₃和CO数据,对2013—2019年京津冀及周边地区“2+26”城市大气污染特征进行分析,并探讨影响其空气质量变化的因素.研究表明:①2013—2019年京津冀及周边地区“2+26”城市空气质量总体向好,2019年ρ（PM_2.5）、ρ（PM₁₀）、ρ（SO₂）、ρ（CO）和ρ（NO₂）比2013年分别下降了50%、41%、79%、49%和20%,ρ（O₃-8 h-90per）（臭氧日最大8 h平均值第90百分位数）比2013年升高了21%.②2013—2019年京津冀及周边地区“2+26”城市重污染天数持续减少,2019年比2013年下降67%,严重污染天数下降尤为明显,降幅达90%.优良天数比例虽然增加,但2016年以后基本稳定在50%左右,没有持续增加的趋势.③ρ（PM₁₀）、ρ（SO₂）、ρ（NO₂）和ρ（CO）的最大值均出现在1月,ρ（O₃-8 h）（臭氧日最大8 h平均值）的最大值出现在6月.ρ（PM_2.5）越高,PM_2.5/PM₁₀和SO₂/NO₂越大,表明二次污染源和燃煤源的贡献越大.④就空间分布而言,ρ（PM_2.5）和ρ（PM₁₀）高值区主要集中在区域中南部太行山脉山前的平原地区,低值区主要集中在区域北部.⑤地理位置、气象条件、产业结构、能耗消耗以及减排政策是影响2013—2019年京津冀及周边地区“2+26”城市空气质量变化的重要因素.研究显示,随着大气污染防治减排措施实施的力度逐渐加大,政策影响已成为京津冀及周边地区“2+26”城市空气质量持续改善的最重要手段.      

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

温度对自养型同步脱氮工艺处理猪场废水厌氧消化液性能及微生物群落的影响

通过运行4个不同温度条件下(30、25、20和15℃)的自养型同步脱氮反应器,研究了不同温度下自养型同步脱氮工艺处理猪场废水厌氧消化液的性能差异及其微生物机制.结果表明,30℃条件下反应器脱氮性能最佳.当温度由30℃降为25℃时,反应器总氮去除率从73%降低到66%,总氮去除速率从2. 29 kg·(m~3·d)~(-1)降低到1. 72 kg·(m~3·d)~(-1),污泥的形态和粒径变化不明显(SMD由80. 85μm降为79. 95μm).当温度低于20℃时,总氮去除率降低到42%,总氮去除速率降低到1. 18 kg·(m~3·d)~(-1),同时发现污泥出现解体现象,粒径减小(SMD为63. 21μm).而当温度为15℃时,总氮去除率降低至37%,总氮去除速率低至1. 00 kg·(m~3·d)~(-1),反应器运行困难.微生物群落结构分析表明,温度对厌氧氨氧化细菌的影响明显大于氨氧化细菌,因此低温条件下反应器脱氮性能下降的主要原因是厌氧氨氧化细菌对温度更敏感.