Multi-component sorption isotherms of basic dyes onto peat

The adsorption of basic dyes onto peat from single component and multi-component solution is reported. The adsorption is presented in the form of the equilibrium isotherms. The Freundlich, Langmuir and Redlich-Peterson isotherm equations are fitted to the results and the isotherm constants obtained.     

Spatial variability of PM2.5 in urban areas in the United States

Data from the U.S. Environmental Protection Agency's Aerometric Information Retrieval System (now known as the Air Quality System) database for 1999 and 2000 have been used to characterize the spatial variability of concentrations of particulate matter with aerodynamic diameter < or = 2.5 microg (PM2.5) in 27 urban areas across the United States. Different measures were used to quantify the degree of uniformity of PM2.5 concentrations in the urban areas characterized. It was observed that PM2.5 concentrations varied to differing degrees in the urban areas examined. Analyses of several urban areas in the Southeast indicated high correlations between site pairs and spatial uniformity in concentration fields. Considerable spatial variation was found in other regions, especially in the West. Even within urban areas in which all site pairs were highly correlated, a variable degree of heterogeneity in PM2.5 concentrations was found. Thus, even though concentrations at pairs of sites were highly correlated, their concentrations were not necessarily the same. These findings indicate that the potential for exposure misclassification errors in time-series epidemiologic studies exists.     

Calibration of sharp cut impactors for indoor and outdoor particle sampling

A low-flow rate, sharp cut point inertial impaction sampler was developed in 1986 that has been widely used in PM exposure studies in the United States and several other countries. Although sold commercially as the MS&T Area Sampler, this sampler is widely referred to as the Harvard Impactor, since the initial use was at the Harvard School of Public Health. Impactor nozzles for this sampler have been designed and characterized for flows of 4, 10, 20, and 23 L/min and cut points of 1, 2, 5, and 10 microns. An improved method for determining the actual collecting efficiency curve was developed and used for the recent impactor calibrations reported here. It consists of placing a multiplet reduction impactor inline just downstream of the vibrating orifice aerosol generator to remove the multiplets, thus allowing only the singlet particle s to penetrate through to the impactor being calibrated This paper documents the techniques and results of recent nozzle calibrations for this sampler and compares it with other size-selective inertial impactors. In general, the impactors were found to have sharp cutoff characteristics. Particle interstage losses for all of the impactors were very low, with the exception of the 10-micron cut size 20 L/min impactor, which had greater losses due to the higher flow rate. All of the 2.5-micron cut nozzle laboratory calibrations compare favorably to the U.S. Environmental Protection Agency (EPA) WINS-96 fine particle mass (PM2.5) impactor calibration data.     

Isolation and identification of intermediates from biodegradation of low chlorinated biphenyls (Delor-103)

Microorganism Pseudomonas species P2 metabolizes polychlorinated biphenyls (PCBs) and biphenyl, producing the whole spectrum of intermediates, among them coloured intermediates, which are suitable for the monitoring of PCBs degradation by optical sensors. Knowledge of chemical structures and conditions of development of colour metabolites is necessary for application of optical analytical methods. The main goal of this work was the isolation and identification of intermediates from the biodegradation of the mixture of low chlorinated biphenyls (Delor-103), which is based on the solid phase extraction (SPE) of the whole mixture using LiChrolut EN cartridges, then silylation of the extract as one way to the identification of one part of intermediates by GC-MS, and acetylation of the extract as a way for the further concentration and analysis of more polar chlorobiphenylols and chlorobiphenyldiols. The combination of SPE and following acetylation allows to obtain chlorobiphenylols and chlorobiphenyldiols as an almost pure fraction. The acetylation method could be also used instead SPE procedure with the same final concentration effect. Using the simulation mass spectrometry program, two new compounds, dihydrodihydroxytrichloro- and tetrahydrodihydroxytrichlorobiphenyl, as silylderivatives, were identified.     

Uncommon diversity in developmental mode and larval form in the genus <Emphasis Type="Italic">Macrophiothrix</Emphasis> (Echinodermata: Ophiuroidea)

Development mode in the ophiuroid genus Macrophiothrix includes an unusual diversity of planktonic larval forms and feeding types. The modes of development for seven congeners that coexist in coral reef habitats at Lizard Island, Australia were compared using larvae generated from crosses over several reproductive seasons from 1999 to 2003. Three species (Macrophiothrix koehleri Clark, Macrophiothrix longipeda Lamarck, Macrophiothrix lorioli Clark) develop from small eggs (<170 μm) into typical obligately feeding planktonic (planktotrophic) pluteus larvae with four larval arm pairs. The remaining four species develop from larger eggs (≥230 μm) into either facultatively-feeding or non-feeding (lecithotrophic) larval forms. The facultative planktotroph (Macrophiothrix rhabdota Clark) retains the ability to digest and benefit from food but does not require particulate food to complete metamorphosis. Among the lecithotrophic species, Macrophiothrix caenosa Hoggett retains the pluteus morphology with four pairs of larval arms, but is incapable of feeding, depending instead on maternal provisions for larval development. The remaining two lecithotrophs have simplified larval morphologies with only a single pair of full length (Macrophiothrix nereidina Lamarck) or highly reduced (Macrophiothrix belli Doderlein) larval arms and no functional mouth or gut. This genus includes the first example of facultative planktotrophy in ophiuroids, the first example in echinoderms of a complete pluteus morphology retained by a lecithotrophic larva, and three degrees of morphological simplification among lecithotrophic larval forms. Egg volume varies 20-fold among species and is related to variation in feeding mode, larval form, and development time, as predicted for the transition from planktotrophic to lecithotrophic development.     

Neural tube defects in trisomy 18

Central nervous system anomalies in trisomy 18 are usually confined to structural abnormalities of brain development. Despite the recognized association of neural tube defects and trisomy 18, primary (true) anencephaly is uncommon in the classical trisomy 18 phenotype. A case of anencephaly with trisomy 18, diagnosed prenatally, is presented with a review of the literature of this association.     

Hot-blooded singers: endothermy facilitates crepuscular signaling in African platypleurine cicadas (Hemiptera: Cicadidae:<Emphasis Type="Italic"> Platypleura</Emphasis> spp.)

The cicada genus Platypleura has a wide distribution across Africa and southern Asia. We describe endothermic thermoregulation in four South African species that show crepuscular signaling behavior. This is the first evidence of thermoregulation in platypleurine cicadas. Field measurements of body temperature ( T _b) show that these animals regulate T _b through endogenous heat production. Maximum T _b measured was 22.1°C above ambient temperature during calling activity at dusk. The mean T _b during dusk activity did not differ from the mean T _b during diurnal activity. A unique behavior for cicadas, a temperature-dependent telescoping pulsation of the abdomen, was observed in the laboratory during endogenous warm-up. This behavior is part of a unique method of heat generation in endothermic cicadas. Males generally call from trunks and branches within the canopy and appear to use endothermy even when the sun is available to elevate T _b. Endothermy may provide the cicadas with the advantage of decreasing predation and acoustic competition by permitting calling from perches that most complement their cryptic coloration patterns and that ectotherms cannot use due to thermal constraints. In addition, endothermy may permit calling activity during crepuscular hours when atmospheric conditions are optimal for acoustic communication and predation risks are minimal.     

Urea Fluctuations in Stream Baseflow across Land Cover Gradients and Seasons in a Coastal Plain River System

Urea‐N is a component of bioavailable dissolved organic nitrogen (DON) that contributes to coastal eutrophication. In this study, we assessed urea‐N in baseflow across land cover gradients and seasons in the Manokin River Basin on the Delmarva Peninsula. From March 2010 to June 2011, we conducted monthly sampling of 11 streams (4 tidal and 7 nontidal), 2 wastewater treatment plants, an agricultural drainage ditch, and groundwater underlying a cropped field. At each site, we measured urea‐N, DON, dissolved organic carbon (DOC), total dissolved nitrogen (TDN), NO₃^?‐N, and NH₄⁺‐N. In general, urea‐N comprised between 1% and 6% of TDN, with the highest urea‐N levels in drainage ditches (0.054 mg N/L) and wetland‐dominated streams (0.035–0.045 mg N/L). While urea‐N did not vary seasonally in tidal rivers, nontidal streams saw distinct urea‐N peaks in summer (0.038 mg N/L) that occurred several months after cropland fertilization in spring. Notably, the proportion of wetlands explained 78% of the variance in baseflow urea‐N levels across the Manokin watershed. In wetland‐dominated basins, we found urea‐N was positively related to water temperature and negatively related to DOC:DON ratios, indicating short‐term urea‐N dynamics at baseflow were more likely influenced by instream and wetland‐driven processes than by recent agricultural urea‐N inputs. Findings demonstrate important controls of wetlands on baseflow urea‐N concentrations in mixed land‐use basins.     

Representing the Connectivity of Upland Areas to Floodplains and Streams in SWAT+

In recent years, watershed modelers have put increasing emphasis on capturing the interaction of landscape hydrologic processes instead of focusing on streamflow at the watershed outlet alone. Understanding the hydrologic connectivity between landscape elements is important to explain the hydrologic response of a watershed to rainfall events. The Soil and Water Assessment Tool+ (SWAT+) is a new version of SWAT with improved runoff routing capabilities. Subbasins may be divided into landscape units (LSUs), e.g., upland areas and floodplains, and flow can be routed between these LSUs. We ran three scenarios representing different extents of connectivity between uplands, floodplains, and streams. In the first and second scenarios, the ratio of channelized flow from the upland to the stream and sheet flow from the upland to the floodplain was 70/30 and 30/70, respectively, for all upland/floodplain pairs. In the third scenario, the ratio was calculated for each upland/floodplain pair based on the upland/floodplain area ratio. Results indicate differences in streamflow were small, but the relative importance of flow components and upland areas and floodplains as sources of surface runoff changed. Also, the soil moisture in the floodplains was impacted. The third scenario was found to provide more realistic results than the other two. A realistic representation of connectivity in watershed models has important implications for the identification of pollution sources and sinks.