黑龙江及周边中强震前不同参数模型矩加速释放(AMR)现象特征分析

应用时间破裂分析方程中表征地震距释放程度的m值,选取不同空间尺度进行时空扫描研究,得到震前1年以每2个月为时间间隔的空间m值随时间变化的分布图像,运用不同参数设置计算了地震前Benioff累积应变释放特征。通过对比这些变化找出研究区内m值空间分布搜索主震破裂点扫描效果较好的参数模型,尝试性地给出了"矩释放程度空间扫描"方法应用于地震预测的经验指标。并结合与矩加速释放具有相同物理机制的加卸载响应比(Load/Unload Response Ratio)方法进行综合分析,利用这两种方法对地震进行中短期预测,达到两种方法互相检验、相互辅助的目的。考虑到本文仅对6个震例进行研究,无法给出具有统计显著性的结论,所以仍需结合其他方法进行点、线、面的综合分析。     

水解酸化工艺的研究现状与发展趋势

水解酸化工艺对各类有机物的去除率较高,可处理高浓度、难降解废水,运行费用低,在处理纺织印染、化工、造纸废水等领域发挥了重要作用。目前研究主要集中在处理复杂污染物、工艺参数优化、机理及动力学。其发展趋势大致有:与其他工艺结合,深入研究降解机理、探索微生物菌群等。     

改性凹凸棒土吸附地下水中硝基苯的实验研究

从凹凸棒土(以下简称凹土)的有机改性入手,研究凹土的十六烷基三甲基溴化铵(CTAB)、十八烷基三甲基氯化铵(OTAC)改性及吸附模拟硝基苯(nitrobenzene,NB)污染地下水的影响因素及性能。结果表明:采用超声改性法制得的CTAB、OTAC改性凹土对地下水中NB具有较强的吸附能力,每100g凹土改性剂最佳用量为30 mmol。在NB浓度为20mg/L、投加量为4%、吸附时间30 min的条件下,NB吸附去除率分别达45.68%、55.40%;改性凹土的静态吸附行为符合Langmuir吸附等温方程。     

基于臭氧溶胞的活性污泥减量化技术

目前常见的活性污泥减量技术主要包括解偶联技术、微生物的捕食作用以及隐性生长三种方法。基于臭氧氧化溶胞作用从而强化细菌隐性生长的污泥减量技术具有较好的处理效果及良好的应用前景。着重探讨了臭氧溶胞作用的机理及溶胞过程的影响因素。考虑到污泥减量技术在实际污水处理系统中的应用,探讨了臭氧溶胞对污水生物处理系统的影响。     

不同材质对催化裂化装置催化剂粉尘粘附性能的试验研究

在三座DN150 mmX1600 mm有机玻璃塔试验装置上,考察了DN15的塑料拉西环、陶瓷拉西环和不锈钢拉西环三种材质填料对催化剂的粘附能力。在催化剂浓度5‰,液相负荷40 L/h,气相负荷80 m3/h的条件下,经过408h的连续运转,结果表明不同材质填料对催化剂的粘附能力均存在饱和状态,粘附在填料上的催化剂不随时间的持续增加而增多。其中,塑料填料对催化剂的粘附能力最强,增重0.125kg;不锈钢填料次之,增重为0.115kg;陶瓷填料最弱,增重为0.055kg。可为相关领域的工业应用提供借鉴和数据支撑。     

Characterization of typical taste and odor compounds formed by Microcystis aeruginosa

Production and characteristics of typical taste and odor (T&O) compounds by Microcystis aeruginosa were investigated. A few terpenoid chemicals, including 2-MIB, β-cyclocitral, and β-ionone, and a few sulfur compounds, such as dimethyl sulfide and dimethyl trisulfide, were detected. β-Cyclocitral and β-carotene concentrations were observed to be relevant to the growth phases of Microcystis. During the stable growth phase, 41-865 fg/cell of β-cyclocitral were found in the laboratory culture. β-Cyclocitral concentrations correlated closely with β-carotene concentrations, with the correlation coefficient R2 = 0.96, as it is formed from the cleavage reaction of β-carotene. For dead cell cases, a high concentration of dimethyl trisulfide was detected at 3.48-6.37 fg/cell. Four T&O compounds, including β-cyclocitral, β-ionone, heptanal and dimethyl trisulfide, were tested and found to be able to inhibit and damage Microcystis cells to varying degrees. Among these chemicals, β-cyclocitral has the strongest ability to quickly rupture cells.     

Formation of THMs and HANs during bromination of Microcystis aeruginosa

Bromine-contained disinfectants and biocides are widely used in swimming pools, recreational waters and cooling towers. The objective of this study was to evaluate the formation of thrihalomethanes (THMs) and haloacetonitriles (HANs) and their cytotoxicity in algae solutions during free bromine disinfection. Disinfection by-products formation potential experiments were conducted using model solutions containing 7 mg/L (as total organic carbon) Microcystis aeruginosa cells. Effects of free bromine dosage, pH and ammonia were investigated. The results showed that brominated disinfection by-products were the major products when free bromine was applied. The total THMs formed during bromination was much as that formed during chlorination, whereas HANs were elevated by using bromination instead of chlorination. Dibromoacetonitrice (C2H2NBr2 ) and bromoform (CHBr3 ) were the only detected species during free bromine disinfection. The production of C2H2NBr2 and CHBr 3 increased with disinfectant dosage but decreased with dosing ammonia. CHBr3 increased with the pH changing from 5 to 9. However, C2H2NBr2 achieved the highest production at neutral pH, which was due to a joint effect of variation in hydrolysis rate and free bromine reactivity. The hydrolysis of C2H2NBr2 was base-catalytic and nearly unaffected by disinfectant. Finally, estimation of cytotoxicity of the disinfected algae solutions showed that HANs formation was responsible for the majority of toxicity. Considering its highest toxicity among the measured disinfection by-products, the elevated C2H2NBr2 should be considered when using bromine-related algaecide.     

城市新区污水收集系统的建设和管理

城市新区开发的过程中,污水收集系统往往是容易被忽视的部分,因此会带来新的水体污染问题。本文针对城市新区开发中污水收集系统容易出现的问题,从规划、建设和管理三方面进行了研究和分析,并对城市新区污水收集系统建设和管理提出了建议。     

Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs

Real-time monitoring and control of temperature in ultrasonic joining of battery tabs and coupons are important for the quality improvement and cost reduction of battery assembly. However, there have always been difficulties in accurate and real-time measurement of temperature by conventional sensors for practical implementation. In this study, an innovative method is developed to provide an enabling technology for the in situ transient temperature monitoring, which could provide reliable feedback signals for potential control of ultrasonic joining processes. Micro thin film thermocouples (TFTCs) were fabricated on thin silicon substrates, which were then inserted in the welding anvil as a permanent feature so that the sensors were always located about 100 μm directly under the welding spot during joining of multilayer Ni-coated Cu thin sheets for battery assembly. Good repeatability was demonstrated while a temperature rise of up to 650 °C was obtained due to the closeness of the sensors to the welding spot. The inserts with thin film sensors remained functional after welding experiments. This method has a great potential for in situ transient temperature monitoring, and thus the control of ultrasonic joining processes to realize a practical smart joining system.     

镉水质自动在线监测系统的安装和建设

介绍了中国重金属污染物排放现状和镉水质自动在线监测仪的安装运行现状以及重金属在线监测系统相关规范的制定情况,阐述了镉水质自动在线监测仪的分析原理,对基于不同分析原理的仪器进行了性能检验,对监测站房、排污口建设、仪器安装和调试提出了技术要求,同时针对镉水质自动在线监测系统的安装和建设及其相关规范的制定提出了意见和建议.