Sustained treatment: Implications for treatment timescales associated with source‐depletion technologies

Sustained treatment is an emerging concept used to describe enhancements in attenuation capacity after the conclusion of the active treatment period for a given source‐depletion technology. The term includes mechanisms that lead to contaminant transformation or destruction over extended periods of time, such as endogenous biomass decay, slow diffusion of remedial amendments from low‐permeability zones, and the formation of reactive mineral species. This “value‐added” treatment continues after the end of capital expenditures at a site, and it provides additional insight in determining if monitored natural attenuation is a viable long‐term option for a site. This article identifies several sustained treatment mechanisms, examines technology‐specific factors that contribute to sustained treatment, and explores the potential timescales of sustained treatment relative to active treatment. As demonstrated in post‐treatment site data obtained during a comprehensive source‐depletion technology performance survey, enhanced bioremediation is the most promising in promoting sustained treatment, and this beneficial effect can extend for several years due to factors such as slow biomass decay. There is little evidence that other commonly used technologies (thermal treatment, in situ chemical oxidation, surfactant‐enhanced remediation, or cosolvent flushing) result in any significant sustained treatment. An exception would be a cosolvent flushing project where large quantities of biodegradable cosolvent are left in the subsurface at the end of the project, which could result in sustained long‐term dechlorination activity. In the case of in situ chemical oxidation, factors that contribute to a higher incidence of concentration rebound mask any potential sustained treatment effects. © 2011 Wiley Periodicals, Inc.     

Signal Recognition and Hearing Protectors With Normal and Impaired Hearing

Recognition of acoustic signals when perception is subject to interference from noise has already been extensively studied. In this study the influence of hearing protectors (HP) (plugs, muffs) and hearing loss on signal recognition is examined. Different spectrums and levels of the noise are also included. The test results are shown as the masked threshold for the signals heard and identified. In the case of normally hearing subjects a frequency-independent HP (plug) improves hearing performance, while frequency-dependent HP (muffs) tends to worsen it, especially with low-frequency noise. Hearing losses even worsen hearing performance when plugs are worn. Design suggestions are made to optimise signal recognition. Minimum signal-to-noise ratio and the use of HP are discussed.     

A collaborative approach to address the cumulative impacts of mine-water discharge: Negotiating a cross-sectoral waterway partnership in the Bowen Basin,Australia

The social and environmental impacts of rapidly expanding coal and gas industries have generated high levels of public concern and there is increasing evidence of cumulative impacts. In the Bowen Basin of Queensland (Australia) water quality issues have triggered a collaborative response to coordinate monitoring efforts, integrate data and information and undertake regional analysis to inform landscape-scale management. Collaborative governance is promoted as a response to complex environmental problems, such as cumulative impacts. However, application of this approach to the resources and energy sectors remains a significant research gap. This paper reports the results of action research in the 2 years taken to negotiate the establishment of collaborative governance arrangements to address mine-water discharge impacts in the Bowen Basin. The long establishment phase has been required to refine objectives, build trust, develop governance mechanisms and secure resourcing commitments. The partnership established involves more than 20 organisations including regulators, resources and energy companies, agricultural industries and research organisations. The breadth of participating sectors is a significant innovation, but also represents a major challenge in establishing this model of regional environmental governance. Promising strategies adopted to manage these tensions have included neutral brokerage, facilitative leadership, establishing legitimacy of the collaboration and credibility of its reports. The case study provides a cautionary tale of the pursuit of the promise of ‘everyone working together’ to address cumulative impacts. Policy implications include the need for extended commitment and integration of collaborative and other responses.     

New tools in local energy planning: experimenting with scenarios,public participation and environmental assessment

This article presents a model for local energy planning and its application in a full-scale experiment in a Swedish municipality. The model is based on legal requirement, research findings and standards of good practice and includes a combination of analytical and procedural tools intended to support rational decision-making: external scenarios, a citizens’ panel, life cycle analysis and qualitative environmental assessment (EA). The application of the model indicates that the decision-support tools selected can give several new and valuable inputs to local energy planning, such as local knowledge and values through citizen dialogue and comprehensive EAs. However, the experiment also shows that there are several challenges involved in applying the tools, for example, it is difficult to get citizens and the industry to participate and that it is complicated to combine several different tools for decision-making into a single planning process. Moreover, the experiences from the application suggest that the model for local energy planning show great potential but needs to be improved before it can be used as a standard of good practice.     

Aromatized arborane/fernane hydrocarbons as biomarkers for cordaites

Previous palaeobotanical and palynological studies on coals from Euramerican Pennsylvanian (≡ Late Carboniferous) coal basins indicate a major change in coal-swamp floras, especially at the Westphalian–Stephanian (≈Kasimovian–Gzhelian, according to Geological Time Scale 2004) boundary. A flora dominated by arborescent lycophytes was replaced by a vegetation dominated by marattialean tree ferns in various Euramerican coal basins. Earlier combined palynological and organic geochemical studies on Westphalian/Stephanian coals and shales from the Saar-Nahe Basin (Germany) revealed that the distribution of aromatized arborane/fernane hydrocarbons in solvent extracts reflects the increasing importance of seed plants, especially cordaites (extinct group of gymnosperms), conifers and pteridosperms. However, the biological source of the precursor molecules could not be specified. To clarify if the arborane/fernane derivatives MATH, MAPH, DAPH 1, and DAPH 2 in Westphalian/Stephanian coals can be assigned to one of the three potential source plant groups, we analyzed coals, sediments and fossil plant remains from different Euramerican locations with respect to their biomarker composition and stable carbon isotopic composition. Thereby, stable carbon isotopic ratios showed only insignificant variations between Westphalian and Stephanian samples and proved to be an unsuitable tool to describe floral changes during the Westphalian/Stephanian of the Saar-Nahe Basin. In contrast, we were able to show for the first time that MATH, MAPH, DAPH 1 and DAPH 2 are prominent constituents only in extracts of cordaitean macrofossils and can therefore be regarded as biomarkers for this group of gymnosperms.     

Tissue-specific accumulation and lactational transfer of polychlorinated biphenyls, chlorinated pesticides, and brominated flame retardants in hooded seals (Cistophora cristata) from the Gulf of St. Lawrence: applications for monitoring

Accumulation and mother-pup transfer of halogenated organic contaminants was studied in hooded seal tissues from eastern Canada. Blubber polychlorinated biphenyl (PCB) and total pesticide concentrations were relatively high, possibly due to their high trophic level and demersal feeding habits. Blood plasma showed the lowest contaminant concentrations compared to blubber and liver, possibly due to a lower affinity of these compounds to lipoproteins in blood plasma. Total contaminant body burden correlated well with blubber, liver, and milk contaminants, but not with blood plasma contaminants, indicating that blood plasma might be less suitable to monitor contaminants in hooded seals. Lactational transfer favored less lipophilic contaminants and was associated with relatively high blood plasma PCB and polybrominated diphenyl ether concentrations in females. Despite lactational transfer, females did not show significantly lower blubber contaminant concentrations or burdens than males. This might be caused by their low blubber, and thus contaminant, loss during lactation compared to other species.     

Accumulation of nutrients and heavy metals in Phragmites australis (Cav.) Trin. ex Steudel and Bolboschoenus maritimus (L.) Palla in a constructed wetland of the Venice lagoon watershed

A recently constructed wetland, located in the Venice lagoon watershed, was monitored to investigate growth dynamics, nutrient and heavy metal shoot accumulation of the two dominating macrophytes: Phragmites australis and Bolboschoenus maritimus. Investigations were conducted over a vegetative season at three locations with different distance to the inlet point to assess effects on vegetation. The distance from the inlet did not affect either shoot biomass or nutrients (N, P, K and Na) and heavy metals (Cr, Ni, Cu and Zn) shoot content. With the exception of Na, nutrient and heavy metal concentrations were higher in shoots of P. australis than in B. maritimus. Heavy metal concentration in the incoming water and in the soil was not correlated to the plant content of either species. Shoot heavy metal concentrations were similar to those reported in the current literature, but accumulation generally increased towards the end of the growing season.     

Microwave pretreatment for enhancement of phosphorus release from dairy manure

Both the advanced oxidation process (AOP) using a combination of hydrogen peroxide addition and microwave heating (H2O2/microwave), and the microwave heating process were used for solubilization of phosphorus from liquid dairy manure. About 80% of total phosphate was released into the solution at a microwave heating time of 5 min at 170 degrees C. With an addition of H2O2, more than 81% of total phosphate could be released over a reaction period of 49 h at ambient temperature. The AOP process could achieve up to 85% of total phosphate release at 120 degrees C. The results indicated that both the microwave, and the AOP processes could effectively release phosphate from liquid dairy manure. These processes could serve as pretreatments for phosphorus recovery from animal wastes, and could be combined with the struvite crystallization process to provide a new approach in treating animal wastes.     

Model estimation and measurement of ammonia emission from naturally ventilated dairy cattle buildings with slatted floor designs

Laboratory experiments were carried out in a wind tunnel with a model of a slurry pit to investigate the characteristics of ammonia emission from dairy cattle buildings with slatted floor designs. Ammonia emission at different temperatures and air velocities over the floor surface above the slurry pit was measured with uniform feces spreading and urine sprinkling on the surface daily. The data were used to improve a model for estimation of ammonia emission from dairy cattle buildings. Estimates from the updated emission model were compared with measured data from five naturally ventilated dairy cattle buildings. The overall measured ammonia emission rates were in the range of 11-88 g per cow per day at air temperatures of 2.3-22.4 degrees C. Ammonia emission rates estimated by the model were in the range of 19-107 g per cow per day for the surveyed buildings. The average ammonia emission estimated by the model was 11% higher than the mean measured value. The results show that predicted emission patterns generally agree with the measured one, but the prediction has less variation. The model performance may be improved if the influence of animal activity and management strategy on ammonia emission could be estimated and more reliable data of air velocities of the buildings could be obtained.