Trace Metal Concentrations in an Intensive Agricultural Watershed in British Columbia,Canada1

Abstract: Effects of agricultural intensification and a naturally occurring landslide of asbestos material upon water and sediment quality in a transboundary watershed were investigated. The water and sediments of the Sumas River watershed were analyzed for copper (Cu), zinc (Zn), chromium (Cr), and nickel (Ni) concentrations in 1993/1994 and 2003/2004 and differences within sites over time were examined. Based upon a review of the literature, Cu and Zn were used as indicators of agricultural impacts while Cr and Ni were used as indicators of impacts from an asbestos landslide. Animal unit equivalents (AUEs) were calculated on a per area basis as an indicator of livestock density using detailed statistical census data. Whatman #42 filtered metals, bioavailable metals, and sediment‐bound metals (in the <63 μm fraction) were determined at 22 sites along the mainstem and tributaries, including two reference sites. Temperature, pH, and dissolved organic carbon (DOC) were also measured. The bioavailable metal fraction was determined using the diffusive gradient thin film technique (DGT). Sediment‐bound results were compared with British Columbia’s Interim Sediment Quality Guidelines (ISQGs) and Severe Effects Levels (SELs). A Wilcoxon signed rank test was used to determine if the concentrations of metals changed significantly within sites between 1993/1994 and 2003/2004. Spearman rank correlation analysis was used to determine relationships between trace metals, water quality parameters, and AUEs/hectare. The results indicate that Cu and Zn levels in sediments increased significantly to concentrations above the ISQGs of 35.7 mg/kg and 123 mg/kg, respectively from 1993/1994 to 2003/2004 in streams, where associated land use was dominated by intensive agriculture. Higher AUEs/hectare were significantly correlated with greater bioavailable levels of Zn as well as higher sediment‐bound Zn concentrations. Neither Cu nor Cr were detected by the DGTs on any of the sampling occasions. The Cr and Ni sediment concentrations were highest in Swift Creek, the headwater tributary affected by the natural landslide of asbestos material, and decreased in the Sumas River downstream from the point of input. Cr and Ni concentrations have increased in the mid‐region of the Sumas River since 1993/1994, suggesting downstream movement of the asbestos material over time. DGT results indicated that bioavailable Zn is significantly positively correlated to sediment‐bound Zn and livestock density, and bioavailable Ni is significantly correlated to sediment‐bound Ni.     

Consensus Conferences – A Case Study: Publiforum in Switzerland with Special Respect to the Role of Lay Persons and Ethics

This paper focuses on experiences from a case study dealing with the Swiss type of a consensus conference called “PubliForum” concerning “Genetic Technology and Nutrition” (1999). Societal and ethical aspects of genetically modified food meanwhile can be seen as prototypes of topics depending on the involvement of the public through a participatory process. The important role of the lay perspective in this field seems to be accepted in practice. Nevertheless, there is still some theoretical controversy about the necessity and democratic legitimacy of participatory processes in general, and especially about those dealing with technological or environmental problems (sustainable development) concerning society. From an ethical point of view, a lot of heterogeneous problems concerning contents and procedures of public participation can be pointed out, not only on the theoretical level but also in practice, e.g., concerning the communication process between laypersons and experts. The intention of our paper is to give hints and to clarify criteria that support the communication process leading to a dialog of autonomous citizens and which especially consider ethical aspects in the field. One important result is that there must be an orientation for all members of a consensus conference having clear rules and knowing their different roles that support transparency, credibility, and fairness of the whole procedure and a “good product”: a substantial final document or citizens’ report. This paper presents results of the project Ethical Bio-TA Tools as funded by the European Commission, DG Research, under FP5, Quality of Life Programme.     

Effects of initial seated position in low speed rear-end impacts: a comparison with the TNO rear impact dummy (TRID) model

Injury-producing mechanisms associated with rear-end impact collision has remained a mystery not withstanding numerous investigations devoted to its scrutiny. Several criteria have been proposed to predict the injury-causing mechanism, but none have been universally accepted. The challenge lies in determining a set of testing procedures representative of real-world collisions, wherein the results obtained are not only the same as human testing, but remain consistent with various subjects and impact conditions. It is hypothesized that one of the most important considerations in the testing methodology is the effect of initial seated position (ISP) on occupant kinematics during a rear impact collision. This study involves two parts that evaluates the effects of ISP during rear-end impact. In the first part, head acceleration results of computer simulation using Hybrid III TNO rear impact dummy (TRID) are compared to physical impact testing (PIT) of humans. The second part focuses on the computer simulation using TRID to obtain different neck parameters such as NIC (Neck Injury Criterion), NIJ (Neck Injury Predictor), neck forces and moments to predict the level of neck injury such as whiplash associated disorder (WAD) during low speed rear-end impact. In PIT, a total of 17 rear-impact tests were conducted with a nominal 8-km/hour change in velocity to 5 subjects in four different seated positions comprising of a normal position (NP) and three out of positions (OOP). The first position was a NP, defined as torso against the seat back, looking straight ahead, hands on the steering wheel, and feet on the floor. The second position was a head flex position (HFP), defined as the normal position with head flexed forward approximately 20 degrees. The third position was a torso lean position (TLP), defined as the normal position with torso leaned forward approximately 10 degrees away from the seat back. Lastly, a torso lean head flex position (TLHFP), defined as the normal position with the head flexed forward approximately 20 degrees and torso leaned forward approximately 10 degrees. The head acceleration plots from PIT reveal that for the third and fourth positions (TLP and TLHFP) when the subject torso leaned forward, the peak head acceleration for the subject decreased and there was also a delay in reaching the peak. The Hybrid III-TRID anthropomorphic test dummy (ATD) was used in the same four different seated positions using computer simulation software MAthematical DYnamic MOdel (MADYMO 6.0) and the head acceleration results were compared to PIT. The comparison demonstrates that the Hybrid III-TRID ATD with MADYMO can be a reliable testing procedure during low-speed, rear-end impact for the four ISPs considered since the head acceleration plots deviated within the range of PIT head acceleration plots for different human subjects. This ensures that the second part of the study with neck injury using computer simulation results is a reliable testing procedure. It can be observed that MADYMO results have a greater error when compared to PIT when more than one OOP condition is employed as in TLHFP. All these observations would help in providing a tool to better understand the injury mechanisms and provide an accurate testing procedure for rear-end impact.     

On the move around the clock: correlates and determinants of cathemeral activity in wild redfronted lemurs (<Emphasis Type="Italic">Eulemur fulvus rufus</Emphasis>)

Whether animals are active at night or during the day has profound consequences for many aspects of their behavioral ecology. Because of ecological and physiological trade-offs, most animals, including primates, are either strictly nocturnal or diurnal. However, a few primate species exhibit cathemeral activity, i.e., their activity is irregularly distributed throughout the 24-h cycle. Details and determinants of this unusual activity pattern are poorly understood because long-term 24-h observations are not feasible in the field. We therefore used small data loggers to record the activity of cathemeral redfronted lemurs (Eulemur fulvus rufus) from several neighboring groups quantitatively and continuously over a complete annual cycle in order to evaluate various proposed proximate and ultimate determinants of cathemeral activity. Activity data were examined for variation as a function of ambient temperature, time of day, lunar phase, and season. We found that cathemeral activity occurred year-round and that, on average, 3.5 times more activity occurred during the day. Total and diurnal activity increased during the long days of the austral summer. Nocturnal activity increased during the longer nights of the cool dry season. Irrespective of season, lunar phase had a significant effect on the distribution of activity across the 24-h cycle, with most nocturnal activity recorded during parts of the night with greatest brightness. These data indicate that light availability is the primary proximate determinant for the patterning of cathemeral activity. Several lines of evidence suggest that cathemerality in lemurs has evolved from nocturnal ancestors and that it represents a transitory state on the way to the diurnal niche.Communicated by F. Trillmich