Phytoremediation of polyaromatic hydrocarbons, anilines and phenols

Phytoremediation technologies based on the combined action of plants and the microbial communities that they support within the rhizosphere hold promise in the remediation of land and waterways contaminated with hydrocarbons but they have not yet been adopted in large-scale remediation strategies. In this review plant and microbial degradative capacities, viewed as a continuum, have been dissected in order to identify where bottle-necks and limitations exist. Phenols, anilines and polyaromatic hydrocarbons (PAHs) were selected as the target classes of molecule for consideration, in part because of their common patterns of distribution, but also because of the urgent need to develop techniques to overcome their toxicity to human health. Depending on the chemical and physical properties of the pollutant, the emerging picture suggests that plants will draw pollutants including PAHs into the plant rhizosphere to varying extents via the transpiration stream. Mycorrhizosphere-bacteria and -fungi may play a crucial role in establishing plants in degraded ecosystems. Within the rhizosphere, microbial degradative activities prevail in order to extract energy and carbon skeletons from the pollutants for microbial cell growth. There has been little systematic analysis of the changing dynamics of pollutant degradation within the rhizosphere; however, the importance of plants in supplying oxygen and nutrients to the rhizosphere via fine roots, and of the beneficial effect of microorganisms on plant root growth is stressed. In addition to their role in supporting rhizospheric degradative activities, plants may possess a limited capacity to transport some of the more mobile pollutants into roots and shoots via fine roots. In those situations where uptake does occur (i.e. only limited microbial activity in the rhizosphere) there is good evidence that the pollutant may be metabolised. However, plant uptake is frequently associated with the inhibition of plant growth and an increasing tendency to oxidant stress. Pollutant tolerance seems to correlate with the ability to deposit large quantities of pollutant metabolites in the 'bound' residue fraction of plant cell walls compared to the vacuole. In this regard, particular attention is paid to the activities of peroxidases, laccases, cytochromes P450, glucosyltransferases and ABC transporters. However, despite the seemingly large diversity of these proteins, direct proof of their participation in the metabolism of industrial aromatic pollutants is surprisingly scarce and little is known about their control in the overall metabolic scheme. Little is known about the bioavailability of bound metabolites; however, there may be a need to prevent their movement into wildlife food chains. In this regard, the application to harvested plants of composting techniques based on the degradative capacity of white-rot fungi merits attention.     

Acute exposure to chemicals during ‘do-it-yourself’ activities: survey of enquiries to the Swedish Poisons Information Centre in 1996

In 1996 the Swedish Poisons Information Centre performed a follow-up study concerning poisonings related to ‘do-it-yourself’ activities. The study was supported by the National Institute of Public Health in Sweden. The objectives were to investigate and define monthly variations, route of exposure, type of products and, in particular, exposures to corrosives, age and sex groups, place of treatment, severity of symptoms, place of the accident, special risk products and risk situations. The Poisons Information Centre was contacted concerning 1609 cases, with a peak during the summer months. There was no or uncertain connection between exposure and symptoms in 117 cases. This means that 1492 cases were left to study. Inhalation and eye exposure were the predominant routes, followed by skin exposure and ingestion. Cleaning agents were the most common type of products involved. Of the 1492 cases included in the study 1033 were possible to follow up. Among these, 20–29 year olds and 30–39 year olds predominated, and there was a dominance for men. In total, 28% of those exposed were subject to medical attention, either in hospital or in outpatient clinics. According to the Poisoning Severity Score 78% had mild (grade 1) and 7% moderate (grade 2) symptoms. There were no severe intoxications and no deaths. Severity grade 2 occurred 3.6 times more often among those with exposures involving risk of corrosive damage than among others in the study population. Most accidents occurred in the home. Special risk products and risk situations were exposure to corrosive products, release of chlorine when mixing hypochlorite and acid, ‘fire-eating’, siphoning gasoline and diesel fuel, welding, and inhalation of carbon monoxide from exhaust gases. The Swedish Poisons Information Centre registered 1609 cases of poisoning accidents during ‘do-it-yourself’ activities, which means an average of four to five cases per day. Although this type of accidents is not uncommon, significant poisoning seems to be rare. Some special risk situations were identified.     

Behaviour of Rice-Byproducts and Optimizing the Conditions for Production of High Performance Natural Fiber Polymer Composites

This present study deals with evaluating some available rice by-products, such as rice straw and rice husks, as a fiber component in manufacturing of high performance natural fiber polymer composites (NFPC). The utilization of these undesirable wastes will contribute to the reduction of the environmental impact of waste disposal by burning. Two matrices (thermoset and thermoplastic) were used. Optimization of manufacture conditions of polyester-based thermosetting polymer composites was carried out through examine the effects of fibers to polymer ratio, amounts of catalyzed and initiator, fraction size of fibers and substituting one fibers by another, as well as time, temperature and pressure of pressing. The possibility of styrene containing polyester solution on improving the fiber interface via in situ grafting and enhancing the strength and water resistance of the produced NFPC was also evaluated, in comparison with that produced from using thermoplastic matrix (polypropylene) in presence of coupling agent. The production of this valuable product (NFPC) by this simple procedure, which not needs special devices (twin extrusion with heater), and chemicals to improve the compatibility between fibers and polymer matrix, will ensure reasonable profits and direct impacts on the Egyptian economy in general and rice growers in particular.     

Signal recognition and hearing protectors with normal and impaired hearing.

Recognition of acoustic signals when perception is subject to interference from noise has already been extensively studied. In this study the influence of hearing protectors (HP) (plugs, muffs) and hearing loss on signal recognition is examined. Different spectrums and levels of the noise are also included. The test results are shown as the masked threshold for the signals heard and identified. In the case of normally hearing subjects a frequency-independent HP (plug) improves hearing performance, while frequency-dependent HP (muffs) tends to worsen it, especially with low-frequency noise. Hearing losses even worsen hearing performance when plugs are worn. Design suggestions are made to optimise signal recognition. Minimum signal-to-noise ratio and the use of HP are discussed.     

Innovations in the water chain – experiences in The Netherlands

Innovations in water chain are discussed based on experiences in the Netherlands. The available and new technological options, as well as their dissemination in the Netherlands, are presented for the prevailing system with add-on technologies (elongation), and for the emerging separation system with technologies at the source. Numerous new options are available for both systems but these options are rarely used. The low use is explained using economic theories and with practical examples from the Netherlands. In order to foster innovations, the mainstream, evolutionary, and behavioral theories pinpoint respectively the pricing of common goods, broad support of concerted action, and support for innovators’ entry. These actions may all be needed. Experiences with a stakeholder cluster in water management suggest that markets for high value water use invoke innovations and low-cost technology adaptations. The systematic development of services that foster high value water-based activities is recommended.     

Improved source assessment of Si, Al and related mineral components to PM10 based on a daily sampling procedure

Samples obtained from an industrialized valley in the East Alpine region were collected daily for a half year and analyzed using X-ray fluorescence to examine the elements Si,Al,Fe,Ca,Mg,Na,K,Zn,P,S and Cl.Some factors affecting the changes of these elements were considered,including time,elemental correlations,weekday,weekend and seasonal changes.Diagnostic analysis provided an insight into a decoupling behavior that occursin siliceous and carbonates minerals.A decrease in Si and Al and an increase in carbonates,Na,K,Zn and P were observed during the cold season.However,a consistently high correlation of Si and Al was observed in all seasons.It was established that such high levels originated from street surface abrasion.The increase in variability and absolute levels of carbonates during the cold season was demonstrated by adding carbonates to the street surface as gritting material to increase the grip on snowy surfaces.A marked increase in Na and Cl was observed in winter which may have been caused by thaw salt that is widely used in winter in Austria.This was associated with a significant increase in K,Zn,and P in the cold season that was the result of domestic space heating with wood.PM10 levels in December were 12 μg/m3 and were higher than levels detected in July.It was established that such high levels originated from mineral oxides,wood smoke,and inorganic ionic material(s).     

Risk measures constituting a risk metrics which enables improved decision making: Value-at-Risk

In this work, a novel approach is proposed for expressing the risks of process plants consisting of a large number of scenarios, in the form of a risk metrics of leading indicators to prevent potential high profile industry accidents. The methodology includes: 1) risk estimation of a portfolio by CPQRA (or QRA), 2) monetization of the tangible risks with the inclusion of the lost time of production, 3) estimation of the maximum portfolio loss using Value-at-Risk approach, 4) inclusion of intangible risks using FN-curve and, 5) generation of F$-curve of tangible risks. The proposed methodology can particularly help in understanding the stakes at risk by performing the overall cost-benefit analysis, for identifying the most risky scenarios and identifying critical equipments to enable better risk-informed decision making in order to adopt appropriate risk mitigation measures. This work establishes the groundwork for developing measures for understanding and comparing the large number of risk values derived from QRA studies for large portfolios. It will aid in less subjective decision making as it enables the decision maker to choose the most preferred portfolio option among alternatives. Decisions made with the accurate understanding of the consequences of risks can significantly reduce potential work-related fatalities, property losses and save millions of dollars.