Utilization of statistics based classification approach to investigate water supply profile of Turkey

In the paper water supply profile of Turkey was examined. In this scope, the questionnaire survey conducted by Turkish Statistical Institute in 2004 to investigate annual amount of water abstracted to drinking water networks by type of resources in 81 provinces was evaluated. In the questionnaire, sources were grouped under five categories as spring, (artificial) lake, river, reservoir and well. Due to the complex and multivariate characteristics of the data sets, to replace a large collection of variables with a smaller number of factors the statistical method "factor analysis" was performed. Results revealed that, water supply systems in the country were mainly governed by groundwater sources (well and/or spring). However, in the northeastern part of the country, rivers were allocated for drinking water supply. On the other hand, reservoir dependent cities were densely located in Marmara, Central Anatolia and Southeast Anatolia Regions. This study showed that statistics based classification methods assist decision makers to extract information from multidimensional complex data sets representing environmental conditions.     

Spatiotemporal changes of landscape pattern in response to deforestation in Northeastern Turkey: a case study in Rize

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzes spatial and temporal changes in land use and forest cover patterns in a typical mountain forest area in Rize Forest Enterprise of the Northeastern part of Turkey. The area is investigated by evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1984 and 2007 using GIS and FRAGSTATS. The quantative evidences presented here showed that there were drastic changes in the temporal and spatial dynamics of land use/forest cover. As an overall change between 1984 and 2007, there was a net decrease of 2.30% in total forested areas. On one hand, productive forest areas decreased 12,506 ha, on the other hand, degraded forest areas increased 14,805 ha. In examining the changes of crown closure and development stages of forest ecosystem during the study period, the forest stand area with medium crown closures increased. Regenerated area increased while the other development stages were left to grow to mature development stages in the period. These results regarding to crown closure and development stage showed that forest quality has increased but total forest areas decreased. This is partially due to out-migration of rural population in Rize and Cayeli towns. In terms of spatial configuration, analysis of the metrics revealed that landscape structure in Study area had changed substantially over the 23-year study period, resulting in fragmentation of the landscape as indicated by the large patch numbers and the smaller mean patch sizes due to heavy timber subtraction, illegal cutting, and uncontrolled stand treatments.     

The impact of the tunnel exhausts in terms of heavy metals to the surrounding ecosystem

Samples of soil, plants, and lichens were analysed for heavy metal content (Cd, Cr, Cu, Ni, Pb, and Zn) in relation to different distances from the tunnel ventilation systems in order to evaluate the environmental pollution caused by car exhausts pollution from the Tauerntunnel and the Katschbergtunnel (Austria). Results show that the extent of heavy metal pollution is related to the type of tunnel ventilation system. The vertical ventilation system which ends in an exhaust air tower in the alpine pasture of Mosermandl 1,900 m above sea level contaminates soils and plants up to a distance of 750 m from the exhaust source. The dispersion of metals in front of the horizontal ventilation systems, which are located next to the tunnel portals, exhibits a rapid decrease with distance. Lichen transplants placed in front of the horizontal ventilation systems show very high metal accumulation, which gradually declines with the distance from the emitter source, therefore the lichen species Pseudevernia furfuracea can be used as a very efficient biomonitor for monitoring heavy metal pollution caused by tunnel exhausts over time. Data from former years (1986, 1988, 1990 and 1992) and from this present research suggest that the contamination of heavy metals at Mosermandl has decreased slightly in soil samples, except for Cu, but increased in plant samples, whereas a significant increase of Pb was observed.     

Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Effect of sampling effort and sampling frequency on the composition of the planktonic crustacean assemblage: a case study of the river Danube

Although numerous studies have focused on the seasonal dynamics of riverine zooplankton, little is known about its short-term variation. In order to examine the effects of sampling frequency and sampling effort, microcrustacean samples were collected at daily intervals between 13 June and 21 July of 2007 in a parapotamal side arm of the river Danube, Hungary. Samples were also taken at biweekly intervals from November 2006 to May 2008. After presenting the community dynamics, the effect of sampling effort was evaluated with two different methods; the minimal sample size was also estimated. We introduced a single index (potential dynamic information loss; to determine the potential loss of information when sampling frequency is reduced. The formula was calculated for the total abundance, densities of the dominant taxa, adult/larva ratios of copepods and for two different diversity measures. Results suggest that abundances may experience notable fluctuations even within 1 week, as do diversities and adult/larva ratios.     

Using diatoms as quality indicators for a newly-formed urban lake and its catchment

Periphytic diatoms were studied to evaluate the water quality of a newly created lake, formed by the enclosure of the formerly tidal Cardiff Bay (Wales, UK), and the effects of two inflowing rivers which drain densely populated and industrialised catchments. Seven sites in Cardiff Bay and two locations on the inflowing rivers were monitored for diatoms and water chemistry over 2 years. Water quality was assessed using a revised UK trophic diatom index (TDI) and new methods to determine ecological quality ratios and ecological status classes as required by the EU Water Framework Directive. Diatom assemblages reflected spatiotemporal variations in environmental conditions between the rivers and Cardiff Bay and within the bay. In the bay, diatoms reflected differences in river quality and possibly local pollution in certain areas of the lake. High values of the TDI indicated eutrophic to hypertrophic conditions in both rivers and in the bay and diatoms indicated poor ecological status.     

The 210Po and 210Pb levels in surface sediment samples in the Izmir Bay (Aegean Sea-Turkey)

Bottom sediments reflect in general the relative contamination of a sea area. Therefore, a great deal of monitoring work has been dedicated to the analysis of bottom sediments. Izmir Bay is a very important pollution centre in Turkish Aegean coast region due to a densely populated community, industrial complex and maritime transportation, and there are many streams flowing into the bay that pass through a number of industrial and agricultural areas. It had received the majority of domestic and industrial wastewaters until the wastewater treatment plant was constructed. It is well known that sediments play an important role as reservoirs of a fraction of the pollution in aquatic systems. Therefore, sediment samples were collected monthly from three stations which are located in the inner part of the bay during the period January to December 2003. Temporal variations and seasonal changes on their ²¹⁰Po and ²¹⁰Pb contents were examined, and the activity concentrations of ²¹⁰Po and ²¹⁰Pb were found to vary from 43±6 to 132±12 and 27±5 to 91±9 Bq kg^???1 dry wt, respectively. The highest values of those natural radionuclides were measured at Kar??yaka Station because of the current systems of the bay. Seasonally, the ²¹⁰Pb levels were found to increase during the winter time for all the stations.     

Risk of boron and heavy metal pollution from agro-industrial wastes applied for plant nutrition

In this study, the effects of various agro-industrial wastes were investigated when applied to soil alone or in combination with chemical fertilizers, regarding the risks of boron and heavy metal pollution of soils and plants. Nine combinations of production residues from various agro-industries, urban wastes, and mineral fertilizers were applied to potatoes in a field experiment. The content of available boron in the soil differed significantly (p < 0.05) among the applications. Generally, B values were found to be slightly higher when soapstock, prina, and blood were used alone or in combination. Although total Co, Cd, and Pb contents of soils showed no significant differences between the applications, Cr content differed significantly (p < 0.05). No pollution risk was observed in soil in respect to total Co, Cd, Pb, and Cr contents. The amount of boron and heavy metals in leaves showed no significant differences among the applications. Cobalt, Cd, and Pb in leaves were at normal levels whereas Cr was slightly above normal but well under the critical level. Boron was low in tubers and varied significantly between applications such as Co and Cd. The Co content of tubers was high, Cd and Cr contents were below average, and Pb content was between the given values. Some significant correlations were found between soil characteristics and the boron and heavy metal content of soil, leaves, and tubers.     

Total metal levels in crayfish Astacus leptodactylus (Eschscholtz, 1823), and surface sediments in Lake Terkos, Turkey

The aim of this study was to determine the total metal accumulation (aluminium, copper, manganese, lead, cadmium and iron) in different organs and eggs of Astacus leptodactylus (Eschscholtz, 1823) and sediments total metal contents (aluminium, copper, manganese, lead, cadmium, iron, zinc, chromium, nickel) in Lake Terkos. Water and sediment samples were collected from two stations at two different depths (1 and 2 m) of Lake Terkos in May 2008. Crayfish samples were collected by trammel net at the same region. Primary hydrographic conditions, such as temperature (13.6–19.4°C), salinity (0.27–0.34‰), dissolved oxygen (7.04–12.30 mg l^???1) and pH (7.42–8.51), were recorded for each sampling point. Moreover, the total organic carbon (1.65–5.44%) and the total calcium carbonate contents (19.44–41.16%) of sediment samples were determined. According to the Turkish Food Codex (J Zool 26:283–288, 2002), the maximum allowable Pb and Cd levels in crayfish are 0.5 mg/kg wet weight. Accordingly, the Pb and Cd levels determined in A. leptodactylus samples are below this limit. However, when compared with the acceptable metal limits defined by WHO, Australian National Health and Medical Research Council and Ministry of Agriculture in United Kingdom (UK), it is clear that the Cu level is at the limit and the Cd results exceed the limit. When the metal contents in sediment samples from Lake Terkos are examined, it is seen that the Al, Fe, Mn, Ni and Cu contents are lower while Zn, Cr, Cd and Pb contents are higher than the crustal average values. The high values draw attention to the land-based domestic and industrial inputs. Lake Terkos sediments have high enrichment factors (EF) of Zn, Cr, Cd and Pb metals which corroborate this result. The low EFs of Fe, Ni and Cu are due to the natural (terrigeneous) inputs. Additionally, there is no Al, Fe, Ni and Cu metal enrichment in these lake sediments because of the low contamination factor (CF) values. However, it is moderately contaminated by Zn, Cr and Pb, and heavily contaminated by Cd.     

Determination of total Cr in wastewaters of Cr electroplating factories in the I.organize industry region (Kayseri, Turkey) by ICP-AES

The wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in the wastewater sources from electroplating, dyeing, and tannery, has affected the life on earth. This pollution can affect on all ecosystems and human health directly or by food chain. Therefore, the determination of total chromium in this study is of great importance. In this study, accurate, rapid, sensitive, selective, simple, and low-cost technique for the direct determination of total Cr in wastewater samples collected from the some Cr electroplating factories in March 2008 by inductively coupled plasma-atomic emission spectrometry has been developed. The analysis of a given sample is completed in about 15 min by this technique applied. As the result of the chromium analysis, the limit of quantification for the total Cr were founded to be over the limit value (0.05 mg L^???1; WHO, EPA, TSE 266, and inland water quality classification) as 1,898.78 ± 0.34 mg/L at station 1 and 3,189.02 ± 0.56 mg/L at station 2. The found concentration of total Cr has been determined to be IV class quality water according to the inland water classification. In order to validate the applied method, recovery studies were performed.