Modelling stomatal responses of spring wheat (Triticum aestivum L. cv. Turbo) to ozone and different levels of water supply

Spring wheat (Triticum aestivum L. cv. Turbo) was exposed to different levels of ozone and water supply in open-top chambers in 1991. Air was charcoal filtered (CF), non-filtered (NF) and CF plus proportional addition of ambient or twice ambient ozone (CF1, CF2). Seasonal means of O(3), taken over 24 h, were 2.3, 20.6, 17.3, and 34.5 nl litre(-1) for CF, NF, CF1 and CF2 treatments, respectively. A split-plot design was used to obtain two levels of water supply: one-half of the pots was irrigated sufficiently not to show any symptoms of drought stress; the others were exposed to low water supply and received 50% of these amounts. Using a steady-state porometer approximately 800 measurements of stomatal conductance (g(s)) were made on flag leaves from 68 to 106 days after sowing. The measurements yielded only small differences of maximum conductance between the two levels of water supply. Therefore, low water supply did not protect wheat plants against ozone injury via reduced stomatal uptake in this experiment. To describe the effects of environmental variables on the stomatal behaviour, boundary-line analysis and non-linear regression analysis were used. Besides microclimatic parameters, the ozone dose of flag leaves was introduced as an independent variable affecting stomatal aperture. A well-defined boundary line for ozone dose was found, suggesting that increasing ozone dose caused stomatal closure in wheat flag leaves. But at high ozone doses, co-acting senescence seems also responsible for the decrease in stomatal conductance. A multiplicative boundary-line model was used to predict stomatal conductance from combinations of environmental variables. In the test carried out with the measurements of stomatal conductance, the model accounted only for 40% of the variation of g(s). Generalized stomatal response patterns of the herbaceous growth form, the dependence of the variables' age and ozone dose and the lack of an important factor influencing stomatal response (water status of the plant) in the model, are suggested as explanations of the poor results of the test.     

Einsatz der Hasse-Diagrammtechnik zur vergleichenden Datenanalyse von Biomarkerantworten und ?kotoxikologischen Tests

Die ?kotoxikologie mu? sich mit biologischen Systemen und ihren Antworten auf schadstoffinduzierten Stre? auseinandersetzen. Die hierzu verwendete experimentelle Technik eilt dabei den M?glichkeiten dynamischer, proze?orientierter mathematischer Modellierung weit voraus. In dieser methodisch orientierten Arbeit werden Techniken aus der mathematischen Disziplin der Verbandstheorie vorgestellt, die eine Datenanalyse unter den Aspekten vergleichender Bewertung erlauben. Wichtige Ergebnisse sind dabei

?kotoxikologische Risikoanalyse der Cadmium-Belastung im Ackerboden der Industrieregion Leipzig-Halle

Die Cadmium-Belastung im Ackerboden der Region Leipzig-Halle wurde an 63 terrestrischen Standorten über einer Fl?che von etwa 7 000 km² bestimmt. Die Verteilung der durch Normierung auf einheitlichen Gehalt an Ton und organischem Material erhaltenen effektiven Expositionswerte wurde mit Literaturangaben über NOEC-Werte verglichen. Die Risikoanalyse ergibt, da? an 9% der untersuchten Standorte eine potentielle Gef?hrdung der Bodenorganismen durch Cadmium vorliegt. Cadmium contamination in the agricultural soil of the region Leipzig-Halle was determined at 63 sites covering an area of ca. 7 000 km². Normalization according to lutum and organic matter lead to effective exposure values; their distribution was compared with NOEC data taken from literature. The risk analysis reveals that the soil fauna is potentially affected by cadmium contamination at 9% of the investigated sites.     

Determination of microbial activity in activated sewage sludge by dimethyl sulphoxide reduction

A method was developed to determine the dimethyl sulphoxide (DMSO) reduction rate in activated sewage sludge at nearly natural conditions. Linearity of microbially produced dimethyl sulphide with incubation time and sample size was shown. Apart from a fast, sensitive and highly reproducible automatic analysis of dimethyl sulphide, simultaneous determination of mineralisation, respiration and phenol degradation rates was possible. The DMSO reduction rate of samples taken from a municipal sewage plant ranged between 2 and 3 μmol/(g dry matter · h), respiration and mineralisation rates between 30 and 80 μmol/(g · h). Added¹³C₆-phenol was completely degradated after 96 h of incubation. A half-life of 14 h was calculated assuming first order decay. Dose response curves were obtained by incubating samples for 2, 6, 25, and 96 hours after addition of pentachlorophenol. At an incubation time of 6 h, the EC₅₀ values ranged from 20 mg/L (DMSO reduction) to 30 mg/L (phenol degradation) up to 180 mg/L (respiration and mineralisation). Increasing the incubation time to 96 h resulted in a lower EC₅₀ of 9 mg/L for DMSO reduction, whereas it increased to 500 mg/L for respiration and mineralisation.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.     

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

On the sedimentary occurrence of chlorophyllone a

The 13(2),17(3)-cyclopheophorbide a enol (CPP) is shown to convert mainly to a approximately 1:1 mixture of (13(2)R/S) chlorophyllones a (Chlone), when chromatographed over silica gel or alumina supports. 15(1)-hydroxychlorophyllonelactone a and some other chlorophyll a related compounds are also tentatively identified as minor transformation products of CPP. This raises the possibility that the chlorophyllones reported in recent sediments may be analytical artifacts from CPP. However, data for the surface sediments from Lake Motte as well as literature data for other contemporary sediments show that, (i) they are not artifacts, (ii) considering that CPP is the intermediate compound in the formation of chlorophyllones from chlorophyll a, the hydroxylation of CPP in the sedimentary environment involves an enzymatic process leading preferentially to 13(2)S chlorophyllone a.     

On-road vehicle particulate matter and gaseous emission distributions in Las Vegas, Nevada, compared with other areas

During the spring and summer of 2000, 2001, and 2002, gaseous and particulate matter (PM) fuel-based emission factors for approximately 150,000 low-tailpipe, individual vehicles in the Las Vegas, NV, area were measured via on-road remote sensing. For the gaseous pollutants (carbon monoxide, hydrocarbons, and nitrogen oxide), a commercial vehicle emissions remote sensing system (VERSS) was used. The PM emissions were determined using a Lidar-based VERSS. Emission distributions and their shapes were analyzed and compared with previous studies. The large skewness of the distributions is evident for both gaseous pollutants and PM and has important implications for emission reduction policies, because the majority of emissions are attributed to a small fraction of vehicles. Results of this Las Vegas study and studies at other geographical locations were compared. The gaseous pollutants were found to be close to those measured by VERSS in other U.S. cities. The PM emission factors for spark ignition and diesel vehicles are in the range of previous tunnel and dynamometer studies.     

Environmental risk assessment of human pharmaceuticals in Denmark after normal therapeutic use

An environmental risk assessment is presented for the 25 most used pharmaceuticals in the primary health sector in Denmark. Predicted environmental concentrations (PECs) for the aquatic environment were calculated using conservative assumptions and all PECs exceeded 1 ng/l. Measured concentrations were in general within a factor of 2-5 of PECs and ranged from approximately 0.5 ng/l to 3 micrograms/l for nine of the pharmaceuticals reported in literature. The calculation of predicted no-effect concentration (PNEC) based on aquatic ecotoxicity data was possible for six of the pharmaceuticals. PEC/PNEC ratio exceeded one for ibuprofen, acetylsalicylic acid, and paracetamol. For estrogens the PEC/PNEC ratio approached one when non-standard test was used. The ratio was below one for estrogens (standard test), diazepam and digoxin. For the terrestrial compartment, toxicity data were not available, and no assessment was carried out. Comparisons of predicted concentrations of furosemide, ibuprofen, oxytetracycline and ciprofloxacin in sludge based on either preliminary experimental sludge-water partition coefficients (Kd), octanol-water coefficients (Kow) or acid-base constants (pKa) revealed large variations.