Fossil bog soils (‘<Emphasis Type="Italic">dwog</Emphasis> horizons’) and their relation to Holocene coastal changes in the Jade Weser region,southern North Sea,Germany

After the deceleration of the postglacial marine transgression, the German North Sea coast was subject to deposition of a complex pattern of subtidal to terrestrial facies. This study aims at reconstructing these facies changes in the ‘Land Wursten’ region (Lower Saxony) by focussing on so-called dwog horizons (incipient soil horizons of the pre-engineered salt marshes). We explore their implications for relative sea-level reconstructions and their indication for early settlement activities. Archive drilling data (1960, provided by the ‘Landesamt für Bergbau, Energie und Geologie’) were analysed to create five high-resolution stratigraphic cross sections. Three new drilling records were subjected to sedimentological and microfaunal investigations and interpreted to verify and calibrate the archive data. Two dwog horizons were found and ¹⁴C-AMS dated. We found basal salt marsh deposits inundated by a high-energy event and covered by tidal flat sediments. The thick tidal flat unit is again overlain by salt marsh deposits indicating the transition from a shallow marine to a terrestrial environment where dwogs were developed and covered by episodic marine incursions. The ages of the dwogs (1128–969 cal BC; cal AD 1426–1467) do not correlate with known layers of adjacent settlement sites and are critically discussed. However, we show that they correlate with phases of stagnant regional relative sea level (RSL) and can be used as RSL indicators. The combined archive and modern data provide valuable information for the RSL reconstruction and palaeoenvironmental changes. However, further research is recommended to accomplish more detailed information about coastal response during the Holocene sea-level changes and implications for settlement dynamics.     

Species and distribution of rare earth elements in the Baotou section of the Yellow River in China

This paper analyses the contents and species distributions of rare earth elements (REEs) in the water-suspended particulate-sediment system of the Baotou section of the Yellow River, China, with known anthropogenic REE input from industrial discharges. The major forms of REEs were suspended and dissolved in the mainstream and the tributaries of the Baotou section, respectively. The concentrations of the dissolved and suspended REEs had the same trends in the overlying water along the mainstream, which increased from the Seqi section (site A) to the mouth of the Sidaosha River (site D), reaching a maximum value at site D, and tending to decrease thereafter. The contents of REEs in sediment cores showed enrichment with light rare earth elements (LREEs). The bound to carbonates and to Fe–Mn oxides are the major forms of REE in the secondary phase and the REE exhibited LREE enrichment pattern and moderate Eu depletion in suspended particulates and surface sediments. The contents and species distributions of REEs in the water-suspended particulate-sediment system of the Baotou section suggest that the anthropogenic source of REEs from Baotou city have enhanced REE accumulation to the Baotou section. This information is important for predicting possible pollution resulting from anthropogenic REE input into rivers.     

Impact of the quality of climate models for modelling species occurrences in countries with poor climatic documentation: a case study from Bolivia

The quality of climate models has largely been overlooked as a possible source of uncertainty that may affect the outcomes of species distribution models, especially in the tropics, where comparatively few climatic stations are available. We compared the geographical discrepancies and potential conservation implications of using two different climate models (Saga and Worldclim) in combination with the species modelling approach Maxent in Bolivia. We estimated ranges of selected bird and fern species biogeographically restricted to either humid montane forest of the northern Bolivian Andes or seasonal dry tropical forests (in the Andes and southern lowlands). Saga and Worldclim predicted roughly similar climate patterns of temperature that were significantly correlated. Precipitation layers of both climate models were also roughly similar, but showed important differences. Species ranges estimated with Worldclim and Saga likewise produced different results. Ranges of species endemic to humid montane forests estimated with Saga had higher AUC (Area under the curve) values than those estimated with Worldclim, which for example predicted the occurrence of humid montane forest bird species near Lake Titicaca, an area that is clearly unsuitable for these species. Likewise, Worldclim overpredicted the occurrence of fern and bird species in the lowlands of the Chapare region and well south of the Andean Elbow, where more seasonal biomes occur. By contrast, Saga predictions were coherent with the known distribution of humid montane forests in the northern Bolivian Andes. Estimated ranges of species endemic to seasonal dry tropical forests predicted with Saga and Worldclim were not statistically different in most cases. However, detailed comparisons revealed that Saga was able to distinguish fragments of seasonal dry tropical forests in rain-shadow valleys of the northern Bolivian Andes, whereas Worldclim was not. These differences highlight the neglected influence of climate layers on modelling results and the importance of using the most accurate climate data available when modelling species distributions.     

Monitoring of Bt-Maize pollen exposure in the vicinity of the nature reserve Ruhlsdorfer Bruch in northeast Germany 2007 to 2008

Background, aim, and scope Basically, technological innovations are associated with benefits and risks. This is also true for the introduction of genetically modified organisms (GMO) into agriculture. In Germany, precautionary regulations currently demand isolation distances (i.?e. buffer zones) for the cultivation of genetically modified maize (Bt-maize) in the vicinity of conventional (150?m) and organic maize fields (300?m). The Bt-toxin may harm non-target organisms (NTO) such as Lepidoptera. Despite this, corresponding regulations for the protection of nature reserves are lacking to date. Conventional and Bt-maize have been grown in the vicinity of the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch in Brandenburg, Germany. The aim of this study was to investigate whether exposure of maize pollen from surrounding Bt-maize fields to NTOs in the nature protection area could be excluded or not. Two types of exposure were investigated: Firstly, whether maize pollen was dispersed by wind into the nature reserve area exposing resident NTOs. Secondly, foraging NTOs from the nature reserve are exposed by roaming the surrounding fields and collecting maize pollen. In order to fulfil the precautionary principle defined by law, the study should help to determine appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of NTOs in the FFH Ruhlsdorfer Bruch. In 2007, the local authorities issued an isolation distance between Bt-maize fields and nature reserves of 100?m and in 2008, this became 250?m in the northern and 500?m in the westerly direction, respectively. Materials and methods Standardised methods for biological and technical pollen sampling issued by the Association of German Engineers (VDI 4330 Part 3, 2007 and VDI 4330 Part 4, 2006) were applied providing a quality controlled and methodologically harmonised database which does not only serve the needs to be fulfilled by the present case-specific monitoring study but can also be used as a reference database for further investigations. Maize pollen exposure was measured within the FFH Ruhlsdorfer Bruch and its immediate vicinity in July and August 2007 and 2008. In 2007, the sampling was performed at three sites using 12 technical samplers (Sigma-2/PMF) placed at five measuring points at distances from 5?m to 120?m from the maize field edges. Additionally, for biological pollen sampling six bee colonies were situated at these three sites (two colonies at each site). The technical sampler Sigma-2/PMF enables point sampling which is primarily influenced by wind and topography providing information on effective maize pollen input (flow and deposition) at the measuring sites. Honey-bees roaming in the surrounding area with typical foraging distances of several kilometres may act as planar collectors. They may serve as indicators for the exposure to pollen-collecting NTOs. Furthermore, biological sampling is more selective due to the organism’s preferences, whereas the technical sampling is neutral. Hence, both the technical and the biological sampling complement each other in their scope of application. The pollen samples of both matrices were analysed microscopically and the maize pollen loads were quantified. Pollen-DNA was analysed by means of the quantitative PCR-method (qPCR) identifying conventional and Bt-maize pollen by two independent laboratories. In 2008, the monitoring was repeated with additional sites. Eighteen technical samplers were exposed at five sites with eight measuring points at distances from 5?m to 250?m from the maize field edges. Two honey-bee colonies for biological sampling were placed at one site for control purposes. PCR-analyses were performed to measure the amounts of Bt-maize pollen in the samples. Results The results of pollen monitoring at the Ruhlsdorfer Bruch revealed maize pollen exposure for all monitoring sites in both surveys. In 2007, up to 1.75 million maize pollen/m² were deposited at sites closest to the maize field. At 120?m from field edge in the middle of the FFH-reserve, 99,000 maize pollen/m² were detected. In 2008, similar results were found, at distances up to 250?m from the field edges deposition of 164,000 maize pollen/m² was detected. Data on maize pollen deposition show a clear distance relationship and are in accordance with results of further comprehensive surveys based on the same methodology (Hofmann 2007). The results of the microscopic analysis of the pollen pellets demonstrated that bees collected maize pollen at all sites, in 2007 and 2008. Although maize pollen is not the main food source (2007:0.1–0.3?%; 2008:2–3?%) the collection efficiency of the bee colonies resulted in high amounts of sampled maize pollen with 4 to 11 million per site in 2007 and up to 467 million in 2008. Molecular-biological analysis of maize pollen DNA by qPCR demonstrated that transgenic Bt-MON810 DNA was present in all technical and biological samples, corroborated by two independent laboratories. In 2007, the GMO-content in the samples ranged up to 44?% in the bioaerosols and 49?% in the pollen pellets. In 2008, GMO-proportions of up to 18?% were detected. Discussion The results of this study provide evidence that NTOs in the Ruhlsdorfer Bruch were exposed to Bt-maize pollen under the cultivation conditions in 2007 with a buffer zone of 100?m. The GMO-content reached up to 48?%. The results of the monitoring in 2008 confirmed these findings. Even though the exposure could be reduced by increasing the isolation distances to 250?m and 500?m respectively, the results still show percentages of up to 18?% Bt-MON810 in the pollen samples. The results on maize pollen deposition at the Ruhlsdorfer Bruch in 2007 and 2008 correspond to the results of an investigation which was conducted over several years applying the same standardised method, but covering a wider range of distances. The correlation between maize pollen deposition (n/m²) and distance to the source field (m) fitted best to a power function of the type y = 1.2086 · 10⁶ · x ^–0.548. Despite the same trend, the pollen deposition in the Ruhlsdorfer Bruch revealed above-average findings. Also the analysis of the pollen pellets collected by the bees showed an exposure in 2007 with values for the GMO-content of up to 49?%. For both methods, the exposure decreased in 2008 due to the greater buffer zones up to 500?m. Whereas the GMO-content for the biological sampling were reduced to values below 10?%, the values for the technical sampling were still higher indicating that greater buffer zones would be necessary for safety reasons under the precautionary principle. Conclusions The results of this investigation proved that maize pollen were dispersed by wind to distances farther than 250?m from field edge leading to maize pollen exposure in the centre of the nature reserve. The results also demonstrated that foraging NTOs living in the nature reserve were exposed to maize pollen from surrounding fields. Considering the cultivation of Bt-maize MON810, the assumption of the Environmental Risk Assessment (ERA) that there will be no relevant exposure beyond the Bt-maize fields, cannot be confirmed. Considering the results of this and related studies and with respect to the precautionary principle, one can state that buffer zones between Bt-maize fields and protected areas are an effective measure to minimise the exposure of Bt-maize pollen to NTOs and, thus, to prevent from adverse effects. Recommendations and perspectives Because of still insufficient ecotoxicological data for the risk assessment of Bt-maize MON810 considering butterflies and other protected NTOs, protection standards assuring the precautionary principle have to be implemented to avoid Bt-maize pollen exposure to NTOs. This applies for the case Ruhlsdorfer Bruch and for nature reserve areas in general. In order to exclude risks to protected NTOs occurring in nature reserves, sufficient buffer zones for Bt-maize cultivation should be considered. The statistical analysis revealed that distances of more than 500?m are necessary to decisively reduce exposure to foraging insects. In fact, distances of more than 1,000?m are necessary to prevent maize pollen deposition from values above 100,000 pollen/m² with a certainty of 90?%. An adequate risk assessment can only be attained if based on field measurements accounting for the high variation of pollen deposition due to local environmental site conditions and field management. The monitoring should be based on standardised methods. It should include locations with the highest expected deposition rates, the boundaries of the protected areas and sites of interest within those boundaries, e.?g., specific habitats of sensitive species.     

Beurteilung von Bodenkontaminationen mit Radioaktivität im Gebiet Hannover-List nach Maßstäben und Ansätzen der BBodSchV

Background, aim, and scope In the district List of Hanover (Lower Saxony) radioactive contaminations of the ground were detected at a site of a former chemical plant. Due to the lack of an ordinance regarding intervention regulations in the case of radioactive contaminations in Germany this situation had to be assessed on the basis of scales and methods of the German regulations concerning soil protection and contaminated sites. In particular it was necessary to develop methods and levels for the assessment of radioactive contaminations. Materials and methods Because radioactivity can be considered as a carcinogenic substance the methodical approaches of the BBodSchV for this group of substances were used in order to derive test thresholds for radioactive contaminations at children’s play areas, residential areas as well as parks and recreation facilities. Results For the assessment of radioactive soil contaminations with naturally occurring radionuclides at children’s play areas and residential areas the ingestion of soil is the decisive pathway of exposure. For children’s play areas a threshold level of 0.2?Bq/g for the sum U-238,max?+?Th-232,max was obtained. At areas with only impacts of ambient radiation from the contaminated ground test thresholds of 0.5?µSv/h are recommended. A special pathway is the migration of radon from the contaminated soil into basement floors of buildings. Taking into account the natural background levels of radon a concentration of 260?Bq/m³ is suggested as a test threshold in the framework of soil protection benchmarks. Discussion and conclusions will be described in Part 2 of the paper.     

Toxizität und Risk Assessment fluvialer Sedimente und Schwebstoffe: Eine kurze Übersicht bisheriger und neuerer Entwicklungen

Background In recent years, sediments have become a central topic of scientific and public discussion as an important factor for determining water quality. While the quality of surface waters in Germany has significantly improved during the past years, highly contaminated sediments still create a considerable threat to the quality of several European catchment areas. Main features Here, we summarize different concepts and methods for the assessment of sediment quality and report on some novel integrative test methods for assessing sediment toxicity including contaminant re-mobilization during simulated re-suspension events. Results and discussion Currently, different approaches for assessment of sediment pollution exist. While instrumental chemical analyses are not suitable to accurately describe sediment toxicity, combinations of biological and chemical test procedures and integrated approaches, for example weight-of-evidence studies and effect-directed analysis (EDA), have the potential to identify key contaminants. Inter-disciplinary studies combining hydrodynamic and toxicological aspects coupled to real exposure of aquatic organisms to contaminants are currently being developed. Conclusions Monitoring and assessment of sediment quality are of increasing importance, not only for national legislation but also for the implementation of the European Water Framework Directive (WFD). Integrated approaches for the determination of sediment stability play a key role in the appropriate sediment-monitoring strategies.     

Recycling glass-polishing sludge and aluminum anodising sludge in polyurethane and cement composites: fire performance and mechanical properties

Journal of Material Cycles and Waste Management - This article aims to study the mechanical strength and fire resistance of polyurethane/cement (PuCem) composites containing glass sludge and sludge...     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

Ergonomics and Quality Management—Humans in Interaction With Technology,Work Environment,and Organization

Abstract

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate imp ortan t ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elab orate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, in appropriate design of technology, and an unsuitable org an izatio n are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain sup po rt from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.     

The interactive effects of conscientiousness,openness to experience,and political skill on job performance in complex jobs: The importance of context

Caveats concerning the ability of personality to predict job performance have been raised because of seemingly modest criterion‐related validity. The goal of the present research was to test whether narrowing the context via the type of job (i.e., jobs with complex task demands) and adding a social skill‐related moderator (i.e., political skill) would improve performance prediction. Further, along with political skill, the broad factor of personality demonstrated in prior research to have the strongest criterion validity (i.e., conscientiousness) was joined with a narrow construct closely related to openness to experience (i.e., learning approach) in a three‐way interactive prediction of supervisor‐rated task performance. With the employee–supervisor dyads among professionals, but not with the control group of non‐professional employees, task performance was predicted by the three‐way interaction, such that those high on all three received the highest performance ratings. Implications, strengths and limitations, and directions for future research are discussed. Copyright © 2012 John Wiley & Sons, Ltd.