The three-dimensional structure of 3,3',4,4'-tetrachlorobiphenyl, a dioxin-like polychlorinated biphenyl (PCB)

The crystal structure of PCB 77 (3,3',4,4'-tetrachlorobiphenyl, C(12)H(6)Cl(4)), a dioxin-like PCB congener, is described. The dihedral angle of PCB 77 is 43.94(6) degrees, which is slightly larger than calculated or experimental dihedral angles of biphenyl derivatives in solution but smaller than experimental dihedral angles in the gas phase.     

Timing of eclosion in marine insects on Mediterranean shores – studies on Clunio mediterraneus, C. ponticus and Thalassomyia frauenfeldi (Diptera: Chironomidae)

In three Clunio stocks, two from the Mediterranean Sea (Banyuls, Rovinj) and one from the Black Sea (Sosopol), an identical circasemilunar eclosion pattern in combination with a circadian eclosion time of day was evoked in breeding experiments under an artificial moonlight cycle (four nights of 0.3 lux every 30 d, 12 h light:12 h dark). The eclosion peaks occurred on days with artificial moonlight and approximately 2 weeks later, and with regard to the time of day between mid-night and lights-on. In spite of the weak tidal amplitudes on Mediterranean shores, extreme low water levels occur when a nocturnal low-water time coincides on days around full and new moon (spring-tide situation) with winds from land to sea. Field observations at Banyuls and Rovinj agree with the experimental results. In contrast to Clunio spp. adults (life span only a few hours), Thalassomyia frauenfeldi adults (life span up to several days in the laboratory) demonstrated an unsynchronized eclosion pattern in the experiments (no lunar concentration, wide diurnal eclosion gate). Although inhabiting the same intertidal area, T. frauenfeldi walking on exposed intertidal substrates can delay egg-deposition for days and can probably wait for favorable low water levels. The taxonomical status of European Clunio populations is reviewed; minute morphological distinctions are presented for C. mediterraneus in the otherwise morphologically uniform, but ecophysiologically differentiated genus. Received: 15 May 1997 / Accepted: 16 June 1997     

Land Use-related Chemical Composition of Street Sediments in Beijing

BACKGROUND: More than 10 million people are currently living in Beijing. This city faces severe anthropogenic air pollution caused by an intense vehicle increase (11% per year in China), coal combusting power plants, heavy industry, huge numbers of household and restaurant cookers, and domestic heating stoves. Additionally, each year dust storms are carrying particulate matter from the deserts of Gobi and Takla Makan towards Beijing, especially in spring. Other geogenic sources of particulate matter which contribute to the air pollution are bare soils, coal heaps and construction sites occurring in and around Beijing. Streets function as receptor surfaces for atmospheric dusts. Thus, street sediments consist of particles of different chemical compositions from many different sources, such as traffic, road side soils and industry. METHODS: Distributions and concentrations of various chemical elements in street sediments were investigated along a rural-urban transect in Beijing, China. Chemical elements were determined with X-ray fluorescence analysis. Factor analysis was used to extract most important element sources contributing to particulate pollution along a main arterial route of the Chinese capital. RESULTS AND DISCUSSION: The statistical evaluation of the data by factor analysis identifies three main anthropogenic sources responsible for the contamination of Beijing street sediments. The first source is a steel factory in the western part of Beijing. From this source, Mn, Fe, and Ti were emitted into the atmosphere through chimneys and by wind from coal heaps used as the primary energy source for the factory. The second source is a combination of traffic, domestic heating and some small factories in the center of Beijing discharging Cu, Pb, Zn and Sn. Calcium and Cr characterize a third anthropogenic element source of construction materials such as concrete and mortar. Beside the anthropogenic contamination, some elements like Y, Zr, Nb, Ce, and Rb are mainly derived from natural soils and from the deserts. This is supported by mineral phase analysis, which showed a clear imprint of material in road dusts coming from the West-China deserts. CONCLUSIONS: Our results clearly show that the chemical composition of urban road dusts can be used to identify distinct sources responsible for their contamination. The study demonstrates that the chemistry of road dusts is an important monitor to assess the contamination in the urban environment. Chemical composition of street sediments in Beijing comprises the information of different sources of atmospheric particles. RECOMMENDATIONS AND OUTLOOK: This study is only a small contribution to the understanding of substance fluxes related to Beijing's dust. More effort is required to assess Beijing's dust fluxes, since the dust harms the living quality of the inhabitants. Especially the measurable superimposing of long scale transported dust from dry regions with the anthropogenic polluted urban dust makes investigations of Beijing's dust scientifically valuable.     

Synthesis of environmentally relevant fluorinated surfactants--a review

In the past years there has been a growing interest in fluorinated persistent organic pollutants such as perfluorooctanesulfonic acid, perfluorooctanesulfonamides, perfluorinated carboxylic acids and fluorotelomer alcohols. Although these compounds have probably been present in the environment for many decades, we are only now beginning to realize that these environmental contaminants may have serious environmental and health effects. This article gives a state-of-the-art review of synthetic approaches that have been employed for the synthesis of these environmentally relevant fluorinated compounds. Perfluorooctanesulfonic acid derivatives, in particular, pose a problem because only a few perfluorooctanesulfonic acid derivatives are available from commercial sources--a fact that limits the ability of researchers worldwide to further study these compounds. Because of the limited literature available, this article also describes synthetic approaches for shorter chain homologues or perfluoroether analogues that can potentially be applied for the synthesis of perfluorooctanesulfonic acid derivatives. The preparation of typical starting materials for the synthesis of perfluorooctanesulfonic acid derivatives such as the perfluoroalkanesulfonyl fluorides and chlorides will be discussed. Subsequently, their conversion into relevant perfluoroalkane sulfonate salts (R(F)SO3M), sulfonamides (R(F)SO2NH2), N-alkyl sulfonamides (R(F)SO2NHR, R = alkyl), N,N-dialkyl sulfonamides (R(F)SO2NR2, R = alkyl), sulfonamidoethanol (R(F)SO2NRCH2CH2OH, R = -H, -CH3 or -C2H5) and sulfonamidoacetates (R(F)SO2NRCH2CO2H, R = -H, -CH3 or -C2H5) will be described. Many perfluorinated carboxylic acids and fluorotelomer alcohols are available from commercial sources. The review of the synthesis of these two classes of fluorinated compounds includes a review of their industrial synthesis and the synthesis of relevant degradation products.     

Studies in the Biodegradation of 5 PAHs (Phenanthrene,Pyrene, Fluoranthene,Chrysene und Benzo(a)pyrene) in the Presence of Rooted Poplar Cuttings

Cuttings of Populus nigra L. cv. Loenen were cultivated in sand treated with one of the following PAHs: phenanthrene (Phen), fluoranthene (Flt), pyrene (Pyr), chrysene (Chr) and benzo[a]pyrene (BaP). The PAHs were applied at varying levels of concentration to each test series. After 6 weeks the concentration and the distribution of the PAHs in the substrate of the various sets of tests were compared with the concentration in the substrate of the control. Additionally the substrate and the plant roots were tested for evidence of degradation products of PAHs. The results revealed that the levels of concentration of Phen and Pyr detected in the substrate surrounding the roots was in some cases significantly lower than in the corresponding section of substrate in the unplanted set (= control). This phenomenon did not occur for Flt and BaP and in the case of Chr only in those substrates, which had been treated with the highest levels of concentration. As the presence of lesser amounts of Phen and Pyr in the plant pots cannot only be attributed to their accumulation and metabolism in the roots, it is fair to assume that the chemical transformation of these three PAHs took place outside the roots. The set of tests treated with Phen revealed the presence of 2- or 3-hydroxy-Phen (main components), a hydroxy-methoxy-Phen, 9,10-Phenanthrenequinone and one unidentified compound in metabolite form. Altogether eleven metabolites of Pyr were identified in the root extracts, which can be divided into three groups: 1-Hydroxy-Pyr and derivatives, dihydroxy-Pyr and derivatives and ring fission products (4-Hydroxy-Pyr and a derivative of the 4-Phen-carbonic acid). However, the metabolite mass detected for Phen and Pyr represents only an insignificant percentage in comparison with the lesser amounts of PAHs observed in the planted set of tests. This indicates that the three PAHs were reduced to lower molecular compounds, which are methodically impossible to record, and subsequently translocated to other parts of the plant and integrated into the biomass. Although no lesser amount for Flt and BaP was found in the plant pots, 1-Hydroxy-Flt, an unidentified compound of Flt and 1-Methoxy-BaP were detected. These are presumably end products which were enhanced in the roots. It was not possible to identify any transformation products of Chr. It can be assumed that the majority of metabolites were not synthesised in the roots but are a result of microbial degradation in the rhizosphere. The test plants improved the conditions for the biotransformation of Phen and Pyr significantly and accumulated Flt, Pyr, Chr and BaP in their roots. It can therefore be concluded that the use of plants in the bioremediation of contaminated soils is a promising option.