Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

The key elements analysis of Guangdong & Shenzhen ETS & tips for China national ETS construction

The only joint effort area of provincial and municipal governments resides in Guangdong Province and Shenzhen City in China’s carbon emission trading system (ETS) pilots, which characterize the national carbon ETS plots. The present study on the operating experience from this area has important reference value for the national carbon ETS. Analysis and comparison of the key elements show many differences in coverage, total allowance, allowance allocation, and MRV mechanism between Guangdong and Shenzhen carbon ETS. The present study provides the following explanation: (1) the design characteristics of carbon ETS (e.g. coverage, total quotas, the allocation, and MRV mechanism) depend on the local geographical conditions and policy goals. The differences of economic structure in Guangdong Province and Shenzhen City result in different coverage, which then result in differences in other management elements. (2) The operating state of the carbon market is affected by overall design of carbon ETS: in the case of tighter total allowance, lower proportion of China Certified Emission Reductions, and harsher punishment, the carbon market is relatively active, which intends to produce carbon financial market. Based on deep analysis of operation characteristics of carbon ETS in Guangdong and Shenzhen, the present study suggests that (1) the allowance should be allocated freely at the beginning stage and then gradually transited to the voluntary paid auction; (2) the allowances assigned to companies shall be linked up with their energy-saving objectives; (3) the output fluctuations and economic influence on the allowance allocation should be properly handled to maintain the fairness and consistence of allowance allocation standards; (4) stable public expectation is one of the key elements to maintain the regular operation of carbon ETS; (5) constrained carbon emission behavior outside ETS can contribute to social justice; and (6) the improvement of professional skills of relevant personnel in the enterprise and independent third party can enhance carbon emissions data reliability.     

改性糠醛渣吸附脱硫废水中钙离子

石灰石-石膏法烟气脱硫技术中石灰石利用率低导致钙流失严重,为实现脱硫废水中Ca2+的资源化利用,进行糠醛渣改性和Ca2+的吸附特性研究。实验结果表明,利用H3PO4改性后的糠醛渣对脱硫废水中Ca2+具有较高的吸附率;在振荡的前30 min吸附率上升极快,至90 min时基本达到平衡吸附量;对Ca2+浓度对吸附率影响研究结果表明,平衡吸附量与平衡浓度关系符合Langmuir等温吸附方程;在初始Ca2+浓度为300 mg/L的溶液中加入3 g吸附剂,温度30℃条件下振荡90 min,平衡吸附量为8.41 mg/g。     

江苏省太湖流域水功能区纳污能力及限制排污总量研究

水功能区纳污能力及限制排污总量研究是制定区域水污染控制规划的基础。依据《江苏省地表水(环境)功能区划》,结合江苏省太湖流域现状水质和污染概况,针对河网区和湖库区分别采用一维、二维非稳态模型,计算江苏省太湖流域水功能区纳污能力,在此基础上,引入最大污染物入河量,核定50%、75%和90%水文保证率下的最大污染物入河量分别为2015年、2020年和2030年限排总量。结果表明:(1)CODMn和氨氮纳污能力分别为284 803 t/a和22 448 t/a;(2)2015年CODMn和氨氮限排总量分别为221 867 t/a和20 520 t/a,2020年和2030年限排总量递减,均小于纳污能力;(3)CODMn和氨氮入河量削减率分别为21.8%和46.3%,与水质超标率相差均在25%以内,基本相符。江苏省太湖流域纳污能力、限排总量、污染物入河量削减率和水质超标率之间关系合理,计算结果合理。研究成果为太湖流域水环境控制规划提供决策依据。     

4种营养元素对水华鱼腥藻和四尾栅藻增殖的影响

以水华鱼腥藻和四尾栅藻分别作为蓝藻,绿藻代表藻种,采用均匀设计实验方法(uniform design experimentation,UDE)设计藻类AGP实验。采用通径分析法(Path Analysis,PA)对氮、磷、铁和锰在不同藻种增殖过程中的影响程度进行分析。结果表明,4种营养元素对水华鱼腥藻增殖影响的决策排序为FeTNTPMn,微量金属元素铁是影响水华鱼腥藻(蓝藻)增殖的主要因素;对四尾栅藻增殖影响的决策排序为TNTPFeMn,常量元素是影响四尾栅藻(绿藻)增殖的主要因素。联合通径分析法和逐步二次方回归分析法(QRA)建立的数学模型,可用于预判藻增殖。     

对苯二甲酸降解菌固定化生物流化床处理精对苯二甲酸废水

采用微生物筛选、纯化技术,获得了降解对苯二甲酸（TA）的YPC—TA1,YPC—TA2,YPC-TA3,YPC—TA44株菌株。将筛选出的TA降解菌固定化,处理初始TA质量浓度为2650mg／L的模拟废水,降解36h后TA去除率达100％。用TA降解芮在生物流化床反应器中处理PTA废水,最佳容积负荷为6.7kg／（m^3·d）。生物流化床反应器可在容积负荷为6．0～6．5kg／（m^3·d）的较佳条件下长周期稳定运行,COD去除率保持在91％左右,TA去除率保持在94％左右。低pH废水冲击和高容积负荷废水冲击时COD,TA去除率均明显下降,恢复正常讲水后3～4d,COD,TA去除率均恢复正常。     

城市污水生物处理系统中微生物酶的活性及其分布

通过水解模式底物进行分光光度测定的方法,研究了城市污水生物处理系统中微生物酶的活性.选取亮氨酸氨基肽酶、β-葡萄糖苷酶、碱性磷酸酶和脂酶等胞外酶进行分析,结果发现4种胞外酶的平均活性在31.O～88.5 μmol/(L·h),其中76.9%～94.8%的酶活性分布在活性污泥中,说明绝大部分胞外酶是与细胞相连或固定在细胞外多聚絮体基质里.混合水样和出水水样中的DOC几乎相等,而各胞外酶与DOC不存在任何显著的相关关系.增加NO3-浓度可提高亮氨酸氨基肽酶和β-葡萄糖苷酶的活性,但对碱性磷酸酶和脂酶却有明显的抑制作用.     

臭氧法对酸性嫩黄G溶液的脱色效率和残留物的分析

实验考察了臭氧对酸性嫩黄G色度脱除和其溶液pH值的变化情况,并对降解溶液中的残留物进行定量分析。结果发现,20min时,脱色率达到97.5%;有酸性物质生成并使得溶液的pH值随反应时间的推移下降,pH与脱色率总体变化趋势一致。经反应,分子中的—SO3Na基团大部分生成了SO42-;N并没有氧化成NO2-、NO3-,而是生成其它含N化合物。     

A statistic comparison of multi-element analysis of low atmospheric fine particles (PM2.5) using different spectroscopy techniques

Over the past few decades, the metal elements(MEs) in atmospheric particles have aroused great attention. Some well-established techniques have been used to measure particlebound MEs. However, each method has its own advantages and disadvantages in terms of complexity, accuracy, and specific elements of interest. In this study, the performances of inductively coupled plasma–optical emission spectrometry(ICP-OES) and total reflection X-ray fluorescence spectroscopy(TXRF) were evaluated for qualit...     

Two-step harmless treatment of secondary aluminum dross (SAD) by vacuum distillation and alkaline roasting

Journal of Material Cycles and Waste Management - Secondary aluminum dross (SAD) is classified as hazardous waste by many countries in the world because it contains a large number of toxic and...