Possibilities for improving nitrogen use from organic materials in agricultural cropping systems

Nitrogen release from organic nutrient sources in soil is influenced by a range of factors such as soil temperature and moisture, and chemical composition of the organic material. Chemical composition can, to a certain degree, be controlled to increase the synchronization of nitrogen (N) release with plant N demand, whereas climatic factors cannot be controlled and so must be taken into account when planning management measures. In this paper, we discuss different ways to affect N release through manipulation of the chemical composition of fresh or pretreated plant materials and animal manures, timing of incorporation, and intentional distribution during application. We conclude by giving an overview of off-farm options that may need to be implemented to achieve improved use of N, especially in agricultural systems with surplus N.     

Phenolic compounds in oat grains (Avena sativa L.) grown in conventional and organic systems

The concentrations of avenanthramides (AVAs), hydroxycinnamic acids (HCAs), a sucrose-linked truxinic acid (TASE), and certain agronomic parameters were analyzed in organically and conventionally grown oats. Three cultivars of oats (i.e. Freja, Sang, and Matilda) were grown according to standards for both conventional and organic farming in Sweden, from 1998 to 2000. Two levels of nitrogen (N) and three replicates were included. Overall, there were significant differences between years, cultivars, and N rate for AVA concentration in the grains, but there were no differences in concentration as a consequence of the conventional or organic cropping system used. The AVA content was higher in the samples grown in 2000, particularly in the cultivar Matilda, and was negatively affected by higher N rates. The HCAs showed cultivar and year differences, but were not influenced by N rates or the cropping system. The HCA content was highest in Matilda, and was significantly lower in samples grown in 1999. The concentration of TASE differed only between years, and was about 100% higher in samples from 1999, compared with samples from 1998 and 2000. The AVA and HCA concentrations were negatively correlated to the yield and specific weight of the grains and positively correlated to the protein content. Conversely, the concentration of TASE was positively correlated to the yield. The specific parameters responsible for the variation in the phenolic compounds are not known, but it seems that factors affecting the yield and/or the specific weight also affect the concentrations of AVAs, HCAs, and TASE in oat grains.     

Effect of different soil types on the enchytraeids Enchytraeus albidus and Enchytraeus luxuriosus using the herbicide Phenmedipham

Soil ecotoxicology studies are usually performed in standard soils, such as the OECD (Organization for Economic Cooperation and Development) artificial soil or the LUFA St. 2.2, a natural soil. When assessing the toxic effects in the environment, soil properties are often different from those in standard soils, which might lead to a different exposure situation for the test species and, therefore, to a different evaluation of the risk of the test substance. Selected to cover a broad range of properties and based on the Euro-Soils concept, 18 different soils were studied regarding their suitability to two test species: Enchytraeus albidus and Enchytraeus luxuriosus (Enchytraeidae). In reproduction tests, the test species reacted differently to the tested soils, but both enchytraeids did not survive in acid soils (i.e. pH相似文献   

The Water Framework Directive: stakeholder preferences and catchment management strategies--are they reconcilable?

The key objective of the European Water Framework Directive (WFD) is to promote sustainable water use by protecting water resources. Here, we investigate how the economic consequences of a set of water management regulations is received by a group of stakeholders in the R?nne? catchment. We explore three themes from an economic point of view: i) perceived causes of eutrophication, ii) preferences regarding water use, and iii) the extent to which the polluter-pays principle should be applied. There is a common understanding about the intentions in the WFD to enhance cost-effective water use. All stakeholder groups largely share a similar picture of the causes of water quality deterioration. However, there is not one cost-effective and fair solution. Several mixes of remedial measures within the same catchment are possible, depending on the scale of action. Despite potential economic gains from cooperation between sectors, the participants regard the individual polluter-pays principle as the most feasible mode of funding for remedial programs, supported by subsidies. There is little demand for more market institutions (emission fees, tradable emission permits). The stakeholders have a conservative view of water management, i.e. they accept the present combination of regulations and economic incentives, and they are fully aware of the complexity of the issue. In general, the WFD recommendations for the calculation of cost-effective abatement strategies seem to imply an underestimation of the value of external effects in the decision-making process.     

Applicability of Fenton and H2O2/UV reactions in the treatment of tannery wastewaters

In this paper we evaluated the H2O2/UV and the Fenton's oxidation processes for the treatment of tannery wastewater under different experimental conditions. Efficiencies were judged by the amounts of organic substances degraded or eliminated under these treatment techniques. Daphnia magna and Vibrio fischeri were used to monitor toxicity. Organic compounds contained in the untreated and treated tannery wastewater were determined and identified using substance specific techniques. Gas chromatography-mass spectrometry (GC-MS) in positive electron impact (EI(+)) mode was applied to determine volatile organics. Atmospheric pressure ionization (API) mass (MS) and tandem mass spectrometry (MS-MS) coupled with flow injection analysis (FIA) or liquid chromatography (LC) were used to detect or identify polar organic pollutants. The experimental results indicated that both oxidation processes--H2O2/UV at pH 3 and Fenton at pH 3.5--are able to reduce TOC content by mineralisation of the organic compounds.     

Roadside particle number distributions and relationships between number concentrations, meteorology, and traffic along a northern California freeway

Particle number distributions were measured simultaneously upwind and downwind of a suburban-agricultural freeway to determine relationships with traffic and meteorological parameters. Average traffic volumes were 6330 vehicles/hr with 10% heavy-duty vehicles, and volumes were higher in July than November. Most downwind particle number distributions were bimodal, with a primary mode at approximately 10-25 nm, indicating that newly formed particles were sampled. Total downwind 6-237 nm particle number concentrations (Ntot) ranged from 9.3 x 10(3) to 2.5 x 10(5) cm(-3), with higher daily average concentrations in November compared with July. Ntot correlated with wind speed, temperature, and relative humidity. Upwind photochemically initiated nucleation likely led to elevated background nanoparticle concentrations in July, as evidenced by increasing upwind distribution modal diameter with increasing temperature and a strong correlation between upwind Ntot and solar radiation. Also in summer, Ntot showed stronger correlation with heavy-duty vehicle volumes than wind speed, temperature, and relative humidity. These results indicate the importance of measuring background particle size distributions simultaneously with roadside distributions. There may be a minimum vehicle volume from which useful real-world vehicle particle number distributions can be measured at roadside, even when collecting samples within 10 m of the traveled lanes.     

Trichloroacetic acid cycling in Sitka spruce saplings and effects on sapling health following long term exposure

Trichloroacetic acid (TCA, CCl(3)COOH) has been associated with forest damage but the source of TCA to trees is poorly characterised. To investigate the routes and effects of TCA uptake in conifers, 120 Sitka spruce (Picea sitchensis (Bong.) Carr) saplings were exposed to control, 10 or 100 microg l(-1) solutions of TCA applied twice weekly to foliage only or soil only over two consecutive 5-month growing seasons. At the end of each growing season similar elevated TCA concentrations (approximate range 200-300 ng g(-1) dwt) were detected in both foliage and soil-dosed saplings exposed to 100 microg l(-1) TCA solutions showing that TCA uptake can occur from both exposure routes. Higher TCA concentrations in branchwood of foliage-dosed saplings suggest that atmospheric TCA in solution is taken up indirectly into conifer needles via branch and stemwood. TCA concentrations in needles declined slowly by only 25-30% over 6 months of winter without dosing. No effect of TCA exposure on sapling growth was measured during the experiment. However at the end of the first growing season needles of saplings exposed to 10 or 100 microg l(-1) foliage-applied TCA showed significantly more visible damage, higher activities of some detoxifying enzymes, lower protein contents and poorer water control than needles of saplings dosed with the same TCA concentrations to the soil. At the end of each growing season the combined TCA storage in needles, stemwood, branchwood and soil of each sapling was <6% of TCA applied. Even with an estimated half-life of tens of days for within-sapling elimination of TCA during the growing season, this indicates that TCA is eliminated rapidly before uptake or accumulates in another compartment. Although TCA stored in sapling needles accounted for only a small proportion of TCA stored in the sapling/soil system it appears to significantly affect some measures of sapling health.     

The tail feathers of osprey nestlings (Pandion haliaetus L.) as indicators of change in mercury load in the environment of southern Sweden (1969-1998): a case study with a note on the simultaneous intake of selenium

The tail feathers of 104 osprey nestlings (Pandion haliaetus) from Lake Asnen, southern Sweden, were analyzed for total mercury and selenium content. Concentrations of mercury in feathers from the western part of the lake fell during the period 1969-1998, when pollution from industrial mercury had decreased and a paper mill upstream of the lake was closed down in 1979. Nestlings from the eastern part of the lake had initially lower levels of mercury, predominantly from atmospheric fallout. The levels did not decrease during the period. The reason for the differences seems to be the limited water flow between the western and the eastern part of the lake. The selenium concentrations were constant over time and approximately the same in both parts of the lake. The total-Hg/Se ratio in the western part of the lake was 2.94, which is somewhat higher than the 1:1 molar ratio constant (2.54). This indicates that the bioaccumulated quantity of selenium which is thought to be protective for the organisms against the toxic effects of mercury, is somewhat insufficient to bind all body mercury.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Occurrence and abatement of volatile sulfur compounds during biogas production

Volatile sulfur compounds (VSCs) in biogas originating from a biogas production plant and from a municipal sewage water treatment plant were identified. Samples were taken at various stages of the biogas-producing process, including upgrading the gas to vehicle-fuel quality. Solid-phase microextraction was used for preconcentration of the VSCs, which were subsequently analyzed using gas chromatography in combination with mass spectrometry. Other volatile organic compounds present also were identified. The most commonly occurring VSCs in the biogas were hydrogen sulfide, carbonyl sulfide, methanethiol, dimethyl sulfide, and dimethyl disulfide, and hydrogen sulfide was not always the most abundant sulfur (S) compound. Besides VSCs, oxygenated organic compounds were commonly present (e.g., ketones, alcohols, and esters). The effect of adding iron chloride to the biogas reactor on the occurrence of VSCs also was investigated. It was found that additions of 500-g/m3 substrate gave an optimal removal of VSCs. Also, the use of a prefermentation step could reduce the amount of VSCs formed in the biogas process. Moreover, in the carbon dioxide scrubber used for upgrading the gas, VSCs were removed efficiently, leaving traces (ppbv levels). The scrubber also removed other organic compounds.