Whistle communication in mammal-eating killer whales (Orcinus orca): further evidence for acoustic divergence between ecotypes

Public signaling plays an important role in territorial and sexual displays in animals; however, in certain situations, it is advantageous to keep signaling private to prevent eavesdropping by unintended receivers. In the northeastern Pacific, two populations of killer whales (Orcinus orca), fish-eating “resident” killer whales and mammal-eating “transient” killer whales, share the same habitat. Previous studies have shown that residents use whistles as private signals during close-range communication, where they probably serve to coordinate behavioral interactions. Here, we investigated the whistling behavior of mammal-eating killer whales, and, based on divergent social structures and social behaviors between residents and transients, we predicted to find differences in both whistle usage and whistle parameters. Our results show that, like resident killer whales, transients produce both variable and stereotyped whistles. However, clear differences in whistle parameters between ecotypes show that the whistle repertoire of mammal-eating killer whales is clearly distinct from and less complex than that of fish-eating killer whales. Furthermore, mammal-eating killer whales only produce whistles during “milling after kill” and “surface-active” behaviors, but are almost completely silent during all other activities. Nonetheless, whistles of transient killer whales may still serve a role similar to that of resident killer whales. Mammal-eating killer whales seem to be under strong selection to keep their communication private from potential prey (whose hearing ranges overlap with that of killer whales), and they appear to accomplish this mainly by restricting vocal activity rather than by changes in whistle parameters.     

Feeding and non-feeding aggression can be induced in invasive shore crabs by altering food distribution

Human activity can have a large impact on surrounding ecosystems. For example, humans alter resource distributions for other species, potentially modifying these species competitive dynamics. These changes in local competitive processes are frequently associated with species invasions. Here, we investigate how differences in resource distribution affect competitive behaviour using the highly invasive European shore crab (Carcinus maenas). Using a controlled laboratory experiment in combination with behaviour assays and social network analysis, we show that individuals feeding in habitats with clumped food distributions are more aggressive than individuals feeding in habitats where food is evenly dispersed, and this aggression is present even on days where crabs are not feeding. Additionally, this persistent aggression can be induced, suggesting that individuals of this invasive species possess the flexibility to modify their competitive behaviours in response to differences in food distributions. Furthermore, we show how these individual responses can lead to changes in overall organisation of aggressive interactions within a population. We discuss these results in relation to how human impacts can have long-term effects on competitive behavioural strategies, and how behavioural flexibility can allow invasive species to colonise and persist in highly impacted sites such as urban ecosystems.     

Hovering guards of the stingless bee <Emphasis Type="Italic">Tetragonisca angustula</Emphasis> increase colony defensive perimeter as shown by intra- and inter-specific comparisons

Social insects need to defend their nest against robbery, parasitism and predation. The stingless bee Tetragonisca angustula is unique in that it has guards that hover near the nest entrance in addition to guards that stand at the entrance. We tested both the general hypothesis that hovering guards increase the effectiveness with which flying intruders are detected and the specific hypothesis that hovering guards improve the detection of workers of the obligate robber bee, Lestrimellita limao. In an intraspecific study comparing colonies, we found a strong positive relationship between the number of hovering guards and the distance at which a dummy robber bee or L. limao worker, experimentally moved towards the nest entrance, was detected. These results were mirrored in an interspecific study showing that four species of stingless bees with similar population colonies but which lacked hovering guards, detected L. limao only at the nest entrance, in contrast to T. angustula. In addition, we found that a greater number of attacks by guards occurred when dummies were impregnated with citral, a major component of L. limao mandibular gland odour. Our results support the hypothesis that T. angustula hovering guards increase the detection perimeter for flying intruders, especially L. limao.     

Development of a sampling method for the simultaneous monitoring of straight-chain alkanes, straight-chain saturated carbonyl compounds and monoterpenes in remote areas

Studies have shown that biogenic compounds, long chain secondary compounds and long lifetime anthropogenic compounds are involved in the formation of organic aerosols in both polluted areas and remote places. This work aims at developing an active sampling method to monitor these compounds (i.e. 6 straight-chain saturated aldehydes from C6 to C11; 8 straight-chain alkanes from C9 to C16; 6 monoterpenes: α-pinene, β-pinene, camphene, limonene, α-terpinene, & γ-terpinene; and 5 aromatic compounds: toluene, ethylbenzene, meta-, para- and ortho-xylenes) in remote areas. Samples are collected onto multi-bed sorbent cartridges at 200 mL min(-1) flow rate, using the automatic sampler SyPAC (TERA-Environnement, Crolles, France). No breakthrough was observed for sampling volumes up to 120 L (standard mixture at ambient temperature, with a relative humidity of 75%). As ozone has been shown to alter the samples (losses of 90% of aldehydes and up to 95% of terpenes were observed), the addition of a conditioned manganese dioxide (MnO(2)) scrubber to the system has been validated (full recovery of the affected compounds for a standard mixture at 50% relative humidity--RH). Samples are first thermodesorbed and then analysed by GC/FID/MS. This method allows suitable detection limits (from 2 ppt for camphene to 13 ppt for octanal--36 L sampled), and reproducibility (from 1% for toluene to 22% for heptanal). It has been successfully used to determine the diurnal variation of the target compounds (six 3 h samples a day) during winter and summer measurement campaigns at a remote site in the south of France.     

Correlation of six anthropogenic markers in wastewater, surface water, bank filtrate, and soil aquifer treatment

Six trace contaminants (acesulfame (ACE), sucralose (SUC), carbamazepine (CBZ), diatrizoic acid (DTA), 1H-benzotriazole (BTZ) and its 4-methyl analogue (4-TTri)) were traced from wastewater treatment plants (WWTPs) to receiving waters and further to riverbank filtration (RBF) wells to evaluate their prediction power as potential wastewater markers. Furthermore, the persistence of some compounds was investigated in advanced wastewater treatment by soil aquifer treatment (SAT). During wastewater treatment in four conventional activated sludge WWTPs ACE, SUC, and CBZ showed a pronounced stability expressed by stable concentration ratios in influent (in) and effluent (out) (ACE/CBZ: in45, out40; SUC/CBZ: in1.8, out1.7; and ACE/SUC: in24, out24). In a fifth WWTP, additional treatment with powdered activated carbon led to a strong elimination of CBZ, BTZ, and 4-TTri of about 80% and consequently to a distinctive shift of their ratios with unaffected compounds. Data from a seven month monitoring program at seven sampling locations at the rivers Rhine and Main in Germany revealed the best concentration correlation for ACE and CBZ (r(2) = 0.94) and also a good correlation of ACE and CBZ concentrations to BTZ and 4-TTri levels (r(2) = 0.66 to 0.82). The comparison of ratios at different sampling sites allowed for the identification of a CBZ point source. Furthermore, in Switzerland a higher consumption of SUC compared to Germany can be assumed, as a steadily increasing ACE/SUC ratio along the river Rhine was observed. In RBF wells a good correlation (r(2) = 0.85) was again observed for ACE and CBZ. Both also showed the highest stability at a prolonged residence time in the subsurface of a SAT field. In the most peripheral wells ACE and CBZ were still detected with mean values higher than 36 μg L(-1) and 1.3 μg L(-1), respectively. Although SUC concentrations in wastewater used for SAT decreased by more than 80% from about 18 μg L(-1) to 2.1 μg L(-1) and 3.5 μg L(-1) in these outlying wells, the compound was still adequate to indicate a wastewater impact in a qualitative way.     

Occurrence and distribution of organophosphorus flame retardants and plasticizers in anthropogenically affected groundwater

Occurrence and distribution of chlorinated and non-chlorinated organophosphates in 72 groundwater samples from Germany under different recharge/infiltration conditions were investigated. Tris(2-chloro-1-methylethyl) phosphate (TCPP) and tris(2-chloroethyl) phosphate (TCEP) were the most frequently detected organophosphates in groundwater samples. Highest individual organophosphate concentrations (>0.1 μg L(-1)) were determined in groundwater polluted by infiltrating leachate and groundwater recharged via riverbank filtration of organophosphate-loaded recipients. In samples from springs and deep groundwater monitoring wells that are not affected by surface waters, organophosphate concentrations were mostly below the limit of detection. The occurrence (3-9 ng L(-1)) of TCPP and TCEP in samples from aquifers with groundwater ages between 20 and 45 years indicates the persistence of both compounds within the aquifer. At urban sites organophosphate-loaded precipitation, surface runoff, and leakage of wastewater influenced groundwater quality. For rural sites, where groundwater recharge is only influenced by precipitation, organophosphates were very rarely detectable in groundwater.     

Turner syndrome-omphalocele association: Incidence,karyotype, phenotype and fetal outcome

Objective

Omphalocele is known to be associated with genetic anomalies like trisomy 13, 18 and Beckwith–Wiedemann syndrome, but not with Turner syndrome (TS). Our aim was to assess the incidence of omphalocele in fetuses with TS, the phenotype of this association with other anomalies, their karyotype, and the fetal outcomes.

Method

Retrospective multicenter study of fetuses with confirmed diagnosis of TS. Data were extracted from a detailed questionnaire sent to specialists in prenatal ultrasound.

Results

680 fetuses with TS were included in this analysis. Incidence of small omphalocele in fetuses diagnosed ≥12 weeks was 3.1%. Including fetuses diagnosed before 12 weeks, it was 5.1%. 97.1% (34/35) of the affected fetuses had one or more associated anomalies including increased nuchal translucency (≥3 mm) and/or cystic hygroma (94.3%), hydrops/skin edema (71.1%), and cardiac anomalies (40%). The karyotype was 45,X in all fetuses. Fetal outcomes were poor with only 1 fetus born alive.

Conclusion

TS with 45,X karyotype but not with X chromosome variants is associated with small omphalocele. Most of these fetuses have associated anomalies and a poor prognosis. Our data suggest an association of TS with omphalocele, which is evident from the first trimester.     

Screen-positive rate in cell-free DNA screening for microdeletion 22q11.2

Objective

To examine the impact of the fetal fraction (FF) on the screen-positive rate in screening for microdeletion 22q11.2.

Methods

This study is based on samples that were analyzed using the Harmony® Prenatal Test (Roche Inc). The study cohort comprised samples from women with singleton pregnancies who were at least 16 years old and at least at 11 weeks' gestation. Logistic regression analysis was used to determine significant covariates that carry an impact on the screen-positive rate.

Results

The study population consisted of 52,019 pregnancies, including 309 pregnancies with a high-risk result for microdeletion 22q11.2. Thus, the overall screen-positive rate was 0.59%. In the low-risk group, the FF was 10.1%, and in the high-risk group, it was 7.3%. Regression analysis indicated a strong correlation between the FF and the screen-positive rate. In the cases with an FF of <11.0%, the screen-positive rate was 0.92%, while it was 0.13% in the group with a higher FF.

Conclusion

The screen-positive rate depends on the FF. In order to keep the rate low, we recommend restricting the analysis to samples with a FF of 11% and more.     

Evaluation of soil solid amendments for TCE biodegradation in a biobarrier system

Permeable biobarrier systems (PBSs) are being recognized as low‐cost passive bioremediation technologies for chlorinated organic contamination. This innovative technology can play a crucial and effective role in site restorations. Laboratory‐scale experiments were conducted to investigate the biodegradation of trichloroethylene (TCE) to ethylene in shallow groundwater through the use of a PBS enhanced by bioaugmentation at the U.S. Department of Energy's Savannah River Site (SRS). Two composts and two plant amendments, eucalyptus mulch (EM) and corncobs (CC), were examined for their effectiveness at creating and maintaining conditions suitable for TCE anaerobic dechlorination. These materials were evaluated for their (1) nutrient and organic carbon content, (2) TCE sorption characteristics, and (3) longevity of release of nutrients and soluble carbon in groundwater to support TCE dechlorination. Native bacteria in the columns had the ability to convert TCE to dichloroethenes (DCEs); however, the inoculation with the TCE‐degrading culture greatly increased the rate of biodegradation. This caused a significant increase in by‐product concentration, mostly in the form of DCEs and vinyl chloride (VC) followed by a slow degradation to ethylene. Of the tested amendments, eucalyptus mulch was the most effective at supporting the reductive dechlorination of TCE. Corncobs created a very acidic condition in the column that inhibited dechlorination. © 2007 Wiley Periodicals, Inc.     

Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.