Possible linkages between lignite aquifers, pathogenic microbes, and renal pelvic cancer in northwestern Louisiana, USA

In May and September, 2002, 14 private residential drinking water wells, one dewatering well at a lignite mine, eight surface water sites, and lignite from an active coal mine were sampled in five Parishes of northwestern Louisiana, USA. Using a geographic information system (GIS), wells were selected that were likely to draw water that had been in contact with lignite; control wells were located in areas devoid of lignite deposits. Well water samples were analyzed for pH, conductivity, organic compounds, and nutrient and anion concentrations. All samples were further tested for presence of fungi (cultures maintained for up to 28 days and colonies counted and identified microscopically) and for metal and trace element concentration by inductively-coupled plasma mass spectrometry and atomic emission spectrometry. Surface water samples were tested for dissolved oxygen and presence of pathogenic leptospiral bacteria. The Spearman correlation method was used to assess the association between the endpoints for these field/laboratory analyses and incidence of cancer of the renal pelvis (RPC) based on data obtained from the Louisiana Tumor Registry for the five Parishes included in the study. Significant associations were revealed between the cancer rate and the presence in drinking water of organic compounds, the fungi Zygomycetes, the nutrients PO₄ and NH₃, and 13 chemical elements. Presence of human pathogenic leptospires was detected in four out of eight (50%) of the surface water sites sampled. The present study of a stable rural population examined possible linkages between aquifers containing chemically reactive lignite deposits, hydrologic conditions favorable to the␣leaching and transport of toxic organic compounds from the lignite into the groundwater, possible microbial contamination, and RPC risk.     

A novel cell division factor from tobacco 2B-13 cells that induced cell division in auxin-starved tobacco BY-2 cells

Effects of auxin as plant hormones are widespread; in fact in almost all aspects of plant growth and development auxin plays a pivotal role. Although auxin is required for propagating cell division in plant cells, its effect upon cell division is least understood. If auxin is depleted from the culture medium, cultured cells cease to divide. It has been demonstrated in this context that the addition of auxin to auxin-starved nondividing tobacco BY-2 cells induced semisynchronous cell division. On the other hand, there are some cell lines, named habituated cells, that can grow without auxin. The cause and reason for the habituated cells have not been clarified. A habituated cell line named 2B-13 is derived from the tobacco BY-2 cell line, which has been most intensively studied among plant cell lines. When we tried to find the difference between two cell lines of BY-2 and 2B-13 cells, we found that the addition of culture filtrated from the auxin-habituated 2B-13 cells induced semisynchronous cell division in auxin-starved BY-2 cells. The cell division factor (CDF) that is responsible for inducing cell division in auxin-starved BY-2 cells was purified to near-homogeneity by sequential passage through a hydroxyapatite column, a ConA Sepharose column and a Sephadex gel filtration column. The resulting purified fraction appeared as a single band of high molecular weight on sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels by silver staining and was able to induce cell division in auxin-starved BY-2 cells. Identification of the protein by MALD-TOF-MS/MS revealed that it is structurally related to P-glycoprotein from Gossypioides kirkii, which belongs to ATP-binding cassette (ABC)-transporters. The significance of CDF as a possible ABC-transporter is discussed in relationship to auxin–autotrophic growth and auxin-signaling pathway.     

Alignment of the Lumbar Vertebrae in a Driving Posture

The purpose of this study was to define the anatomical arrangement of the lumbar spine in the mid-body sagittal plane of a human volunteer while in three postures: a driving posture; full flexion; and full extension. Radiographic images of the lumbar spine were made of a 33-year old 50th percentile male subject seated in a comfortable driving posture. Additional radiographs were made of the lumbar spine while the subject was postured in full voluntary flexion, and full voluntary extension. Anterior and posterior mid-sagittal vertebral endplate positions were plotted on an x-y coordinate system for each posture. Anterior and posterior disk thicknesses, and the positions of the centers of each vertebra were numerically determined using information from the plots. Disk thicknesses were then graphed and comparisons made for each posture. The arrangements of the centers of vertebrae were graphed and compared for the three different postures. The arrangement of the lumbar vertebrae tended toward that of full voluntary flexion while the subject was in a normal driving posture. Anterior disk thickness was a sensitive indicator of posture, while posterior disk thickness was not. While in a driving posture, the lower back approximated a straight-line that was nearly parallel to the seat back axis. The observations support those of an earlier study. Since soft tissue spinal elements can only be damaged by applying tensile forces in excess of their tolerance, the anterior elements of the lumbar spine would not be directly threatened in low velocity frontal collisions, since anterior elements would be in relative compression. Tension injury to the anterior structures as a result of a rear-end collision would first require reversing the preimpact conditions imposed by the normal driving posture. Tension injury to the posterior spinal elements resulting from low velocity rear-end collisions would be unlikely since axial compression loading would also diminish tension stress in posterior soft tissue structures. Any compression injury to posterior elements resulting from rear-end collisions would first require reversing the pre-impact conditions imposed by the normal driving posture.     

Organoclays for Aquifer Bioremediation: Adsorption of Chlorobenzene on Organoclays and its Degradation by RHODOCOCCUS B528

The adsorption and degradation of chlorobenzene on partially modified organoclays and by the autochthonous microorganism Rhodococcus B528 were studied by means of the batch technique. Organoclays were prepared from Na-montmorillonite (MM) by using dodecyltrimethylammonium (C₁₂) and dioctadecyldimethylammonium (2C₁₈) bromides. The degree of modification was 35 (2C₁₈-35-MM) and 89% (C₁₂-89-MM) of the cation exchange capacity of MM. The adsorption experiments were carried out using headspace GC. The intercalation of chlorobenzene into the interlayers of organo-MM was detected by X-ray diffraction. The adsorption isotherms found were of the S1 type indicating a cooperative effect. Chlorobenzene showed a higher affinity for 2C₁₈-35-MM than C₁₂-89-MM, which could not only be explained by the organic carbon content. The comparison with 2,4-dichlorophenol adsorption has implied that for the studied systems the different adsorption mechanisms are primarily governed by the different molecular properties and not by the type of absorbent. The presence of 2C₁₈-35-MM caused no negative effect on the investigated microorganisms and complete biodegradation of chlorobenzene was achieved without desorption limitation for growth, demonstrating the applicability of partially modified organoclays for bioremediation.     

Affordable technologies for utilization of methane in a landfill environment: An example of an integrated technology array and evolving institutional networks

CARIBELATE, the Caribbean Environmental Laboratory for the Advancement of Technological Entrepreneurship is an evolving institutional concept, as well as a physical complex, that provides a dynamic environment for public, academic and private sector organizations to conduct proof of concept technology demonstrations in a landfill environment. This article traces the successful networking of demonstrations at a landfill in New Jersey and the subsequent design of the CARIBELATE project in the Municipality of Carolina, Puerto Rico. The institutional model developed for the Puerto Rico facility has brought together an unlikely combination of stakeholders. Those from the private sector, here called industrial partners, are paired with academic researchers to optimize products for local markets. The basic technology system demonstrated in New Jersey and to be replicated in Puerto Rico removes harmful contaminants from landfill gas and in so doing produces a variety of useful products. A portion of the landfill gas is utilized for micro‐turbine electricity generation and for heating a demonstration greenhouse that houses aquaculture coupled with hydroponic crop production, where aquaculture effluents are recycled as plant nutrients. A strict protocol to verify emission reduction is imposed on all the demonstrations at the CARIBELATE project. Although greenhouse gas credit verification is not the prime mission, it is suggested that the credits verified from these demonstrations are of high quality, and can serve as an excellent training platform. CARIBELATE is conceived to be operated at the municipal level and contribute to income generation and economic development. The continuing networking of stakeholders from the public and private sectors offers some potential guidance for replicating this design in the developing world.     

Ecosystem function in alluvial tailings after biosolids and lime addition

Municipal biosolids and agricultural limestone were incorporated into the surface of alluvial highly acidic, metal-contaminated mine tailings in Leadville, CO, in 1998. Amended sites were seeded and a plant cover was subsequently established. A range of chemical and biological parameters were measured over time to determine if treatment was sufficient to restore ecosystem function. An uncontaminated upstream control (UUC), a contaminated vegetated area (CVA), and soils collected from the tailings deposits before amendment addition were used for comparison. Standard soil extracts showed decreases in extractable Pb, Zn, and Cd in the amended soils. Increased CO2 evolution, reduced N2O, and elevated NO3- in the amended tailings indicated an active microbial community. Levels of CO2 and NO3- were elevated in comparison with the CVA and UUC. Ryegrass (Lolium perenne L.) and earthworm (Eisenia foetida) survival and metal uptake values were similar in amended tailings to a laboratory control soil. Ryegrass and worms in unamended tailings died. Field plant diversity was lower in amended areas than in CVA or UUC, with a higher percentage of the vegetative cover consisting of grasses. Small mammal analysis showed a low potential for elevated body Cd and Pb in the amended tailings. A re-entrainment study using fathead minnows (Pimephales promelas) showed no danger for resuspended amended tailings, as survival of fish was similar to the laboratory control. Data suggest that ecosystem function has been restored to the amended tailings, but that these systems are not yet in equilibrium.     

The legacy of Bhopal: The impact over the last 20 years and future direction

Chemical process safety was not a major public concern prior to 1984. As far as chemical hazards were concerned, public fears focused on disease (cancer) and environmental degradation. Even a series of major process incident tragedies did not translate into widespread public concerns about major incidents in chemical plants that might disastrously affect the public. This situation changed completely after the December 1984 disaster at the Union Carbide plant in Bhopal. Not only was the public's confidence in the chemical industry shaken, the chemical industry itself questioned whether its provisions for protection against major incidents were adequate.

The recognition of the need for technical advances and implementation of management systems led to a number of initiatives by various stakeholders throughout the world. Governments and local authorities throughout the world initiated regulatory regimes. Has all that has resulted from the legacy of Bhopal reduced the frequency and severity of incidents? How can we answer this question? As we move into more and more globalization and other complexities what are the challenges we must address? According to the authors, some of these challenges are widespread dissemination and sharing of lessons learned, risk migration because of globalization, changing workforce, and breakthroughs in emerging areas in process safety.     

Lessons learned from recent incidents: Facility siting, atmospheric venting, and operator information systems

Recent incidents have focused attention on a number of technical and management systems that need to be addressed by industry. A multiple layer of protection approach is essential for the prevention of incidents and/or reduction of consequences. Safety culture and operational discipline are the overall embracing factors that influence the safety performance of a facility. However, as recent events have indicated, there are a number of technical and engineering issues that must also be developed and implemented appropriately. Some of these issues that could lead to incidents with catastrophic consequences include facility siting and atmospheric relief venting. Impact of operator information systems on the prevention of releases of hazardous materials from their containment is also another significant factor that should be given appropriate attention.

This paper describes these three topics based on the findings from recent incidents and historical data. Engineering standards, regulatory requirements, and industry practices are discussed for facility siting, atmospheric relief venting, and operator information systems. Finally, a summary of gaps and needs in technology, standards, and practices is presented.