Molecular taxonomy of vestimentiferans of the western Pacific and their phylogenetic relationship to species of the eastern Pacific. I. Family Lamellibrachiidae

Phylogenetic relationships among vestimentiferans in the family Lamellibrachiidae collected from ten sites in the western Pacific were analyzed on the basis of the nucleotide sequence of part of a mitochondrial gene for cytochrome oxidase I. The 103 individuals analyzed were tentatively classified into five species: namely, Lamellibrachia satsuma, three tentative species inhabiting Japanese waters and one tentative species from the Manus Basin. Phylogenetic analysis of the four tentative species, L. satsuma, and two lamellibrachiids, whose sequences had been reported previously, namely L. columna from the Lau Basin and L. barhami from the Oregon Margin and the Middle Valley, revealed that the lamellibrachiids from Japanese waters were not monophyletic. While two tentative species from Japanese waters and L. columna formed a monophyletic group, the other tentative species from Japanese waters was closely related to the tentative species from the Manus Basin. L. satsuma was shown to be phylogenetically distinct from other lamellibrachiids of the western Pacific. A lamellibrachiid that had been collected from the Nikko Seamount was also demonstrated to be L. sastuma.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Phylogenetic analyses of potentially free-living <Emphasis Type="Italic">Symbiodinium</Emphasis> spp. isolated from coral reef sand in Okinawa,Japan

The existence of “free-living” Symbiodinium that can form symbioses with hosts is implied by the presence of hosts that produce Symbiodinium-free gametes and expulsion and/or expelled symbiotic algae from host. However, it is still unclear if potentially symbiotic Symbiodinium are found “free-living” in the coral reef environment. Sixteen Symbiodinium strains were established from samples taken from three sampling locations of coral reef sand in Okinawa, Japan. Phylogenetic analyses of the partial large subunit ribosomal DNA (28S-rDNA) and the internal transcribed spacer of ribosomal DNA (ITS-rDNA) conclusively showed that all 16 isolates belonged to Symbiodinium clade A sensu Rowan and Powers (1991). The lack of other Symbiodinium clades besides clade A in this study may be due to other clades not being readily culturable under culture conditions used here. The new isolates could be phylogenetically divided into four groups, though no sequences were identical to previously reported Symbiodinium. Two of the four groups were closely related to symbiotic Symbiodinium clade A isolated from a variety of host species. One isolate group formed a highly supported monophyly with Symbiodinium types that have previously been characterized as “free-living”. The remaining isolate group, although within clade A, was quite divergent from other clade A Symbiodinium. These results indicate that novel diversity of free-living Symbiodinium exists in coral sand.     

Laser tempering based turning process for efficient machining of hardened AISI 52100 steel

Cost-effective machining of hardened steel components such as a large wind turbine bearing has traditionally posed a significant challenge. This paper presents an approach to machine hardened steel parts efficiently at higher material removal rates and lower tooling cost. The approach involves a two-step process consisting of laser tempering of the hardened workpiece surface followed by conventional machining at higher material removal rates with lower cost ceramic tools to efficiently remove the tempered material. The laser scanning parameters that yield the highest depth of tempered layer are obtained from a kinetic phase change model. Machining experiments are performed to demonstrate the possibility of higher material removal rates and improved tool wear behavior compared to the conventional hard turning process. Tool wear performance, cutting forces, and surface finish of Cubic Boron Nitride (CBN) tools as well as low cost ceramic tools are compared in machining of hardened AISI 52100 steel (~63 HRC). In addition, cutting forces and surface finish are compared for the laser tempering based turning and conventional hard turning processes. Experimental results show the potential benefits of the laser tempering based turning process over the conventional hard turning process.     

Distribution of tetrodotoxin in various organs of the starfish Astropecten polyacanthus

Tissues of various organs of the starfish Astropecten polyacanthus collected in the Hiroshima Prefecture from April 1985 to June 1986 were analyzed for lethal potency by the assay method for tetrodotoxin. The ovary showed the highest potency (47 to 1 450 MU g^-1), followed by the digestive organs (<10 to 960 MU g^-1) and the exoskeleton including spines and tube-feet (<10 to 170 MU g^-1). The pyloric caecum and testis were less toxic. Overall toxicity was remarkably higher in females (2 060±382 MU, mean±SE) than in males (1 106±214 MU).     

Arsenic,selenium, and chromium speciation in fly ash

Journal of Material Cycles and Waste Management - Arsenic (As), selenium (Se), and chromium (Cr) are harmful to humans at certain concentrations, and can possibly be eluted from coal ash (fly ash)...     

Evaluation of buckwheat and barley tea wastes as ethanol fermentation substrates

Buckwheat tea waste (BWTW) and barley tea waste (BTW), by-products of the beverage industry, are alternative carbohydrate sources for ethanol production. In this study, optimal enzyme loading for enzymatic saccharification of BWTW and BTW was determined, and simultaneous saccharification and fermentation (SSF) was performed by Saccharomyces cerevisiae and Mucor indicus to produce ethanol. Optimal enzyme loading for enzymatic saccharification of 2?% w/v BWTW and BTW was 0.5?% (weight of enzyme/weight of tea wastes) for BWTW and 0.1?% for BTW. Ethanol production from BWTW by S. cerevisiae and M. indicus after 48?h of SSF was 49.9/100?g of BWTW and 47.9/100?g of BWTW, respectively, with 0.5?% enzyme loading. Ethanol production from BTW by S. cerevisiae and M. indicus after 48?h of SSF was 20.5/100?g of BTW and 21.6/100?g of BTW, corresponding to 62 and 66?% of the theoretical yield based on starch content, respectively, with 0.1?% of enzyme loading. Furthermore, S. cerevisiae produced 76?% of the theoretical yield based on the total glucose from starch in BWTW and BTW when a mixture of BWTW and BTW was used as a substrate, with 0.2?% enzyme loading and no additional nitrogen or mineral sources.     

Fabrication of bulk materials with zeolite from coal fly ash

After packing a compact of coal fly ash mixed with 3.5?M (mol/L) sodium hydroxide solution into a cylindrical plastic mold at 80?°C and 50?% relative humidity for 24?h, the plastic mold was released and the compact was immersed in 3.5?M sodium hydroxide solution at 80?°C for 48?h. When the resultant compact was removed from the solution and cured at 80?°C and 50?% relative humidity for 7?days, a bulk material with zeolite was formed. The strength of the resultant bulk material was a result of the formation of geopolymer (alkali-activated cement). The specific surface area and the compressive strength of the bulk body sample were 21.4?m²/g and 29.0?MPa, respectively. According to a quantitative analysis conducted using the X-ray diffraction (XRD) technique, the content of the formed Na-P type zeolite was estimated to be approximately 28.2?% in mass ratio. The pore size of the resultant bulk materials with zeolite ranges from sub-nanometer to several tens of nanometers, so the resultant bulk material with zeolite exhibited excellent water vapor retention characteristics.     

Evaluation of surface runoff and road dust as sources of nitrogen using nitrate isotopic composition

Stable nitrogen and oxygen isotope ratios of nitrate (δ¹⁵N-NO₃ and δ¹⁸O-NO₃) have recently been used to identify nitrogen sources in water environments. However, there have been no investigations designed to determine nitrate isotopes in non-point sources in urban areas for evaluating the impact of surface deposits on nitrogen in surface runoff. In this study, we collected rainwater, surface runoff and surface deposits (road dust, roof dust and soil) to evaluate the nitrogen sources in surface runoff using nitrate isotopes. There were no large differences in δ¹⁵N-NO₃ among rainwater (−0.3‰ to 1.5‰), surface runoff (−2.7‰ to 0.4‰), leachates from road dust (−5.8‰ to 6.2‰) and soil (−11.5‰ to 0.6‰). In contrast, the δ¹⁸O-NO₃ in surface runoff (28.5-47.9‰) was lower than that in rainwater (62.7-78.6‰), and higher than that in leachates from road dust (6.1-27.6‰) and soil (−1.1‰ to 6.6‰). δ¹⁸O-NO₃ is a useful indicator for evaluating the NO₃-N sources in surface runoff. Using this indicator, NO₃-N from road dust was estimated to account for more than half of the NO₃-N in surface runoff. This is consistent with a result based on a comparison of their loads per unit surface between rainwater and surface runoff, which also showed that most of the nitrogen in surface runoff was derived from surface deposits.     

Analysis of the ability of water resources to reduce the urban heat island in the Tokyo megalopolis

Simulation procedure integrated with multi-scale in horizontally regional-urban-point levels and in vertically atmosphere-surface-unsaturated-saturated layers, was newly developed in order to predict the effect of urban geometry and anthropogenic exhaustion on the hydrothermal changes in the atmospheric/land and the interfacial areas of the Japanese megalopolis. The simulated results suggested that the latent heat flux in new water-holding pavement (consisting of porous asphalt and water-holding filler made of steel by-products based on silica compound) has a strong impact on hydrologic cycle and cooling temperature in comparison with the observed heat budget. We evaluated the relationship between the effect of groundwater use as a heat sink to tackle the heat island and the effect of infiltration on the water cycle in the urban area. The result indicates that effective management of water resources would be powerful for ameliorating the heat island and recovering sound hydrologic cycle there.